CBR1000RR 2008-13 Forks, NSR/NC Wheel, Conversion Kit
This kit consists of the required parts to allow the standard NSR250, NC30/35 (many Honda) front wheel to be used together with the '08-'13* model CBR1000RR forks
Note that this kit is for the wheel only and does not take into account your choice of discs and calipers.
The standard CBR1000RR axle shaft cannot be used with the above mentioned wheels due to the diameter not being compatible with the bearing sizes in the NSR/NC wheel, so we have provided a shaft in the set that fits perfectly with the NSR/NC wheel.
Firstly, the design of the axle spacers allows them to stay attached to the wheel when the wheel is out of the bike, allowing easier fitting/removing of the wheel. To fit the spacers to the wheel you'll see a lip on the spacer that locates behind the seal. Be careful not to damage the seal during fitting (use light grease) and now the spacers will stay in place.
The Fork Bush L. is fitted to the left hand fork from the outside, with the split lining up with the split in the pinch of the fork leg. This is to take up the difference in diameter between the axle shaft supplied and the fork leg bore
Please see drawing for how the axle spacers and fork bush are fitted.
* Disclaimer: We are not exactly sure of all the years that this conversion works but it should be ok for the model years 2008-2013.
Fitting Instructions: ![](/images/00psm/02tpfitman/07fitmanvarious02/05wheelconvkitv1.1cover.jpg)