Harness, Lambda, Ninja 250/300 2013-

Categories

Shopping Cart

1 x STAA-0006 - Racing Step Kit, Aprilia RS-250
1 x EXCS-0051 - Set, Exhaust Chamber, Stainless, Yamaha TZR250 (3MA)
2 x EXPS-0112 - Set, Pipe, Full Race System, WSS300, (Race) KTM RC390
2 x 64102-MA3-720 - Clip, Screen Molding
1 x TYTO-0027 - Pro Arm chain adjusting tool
1 x CK-Yamaha-1WG - Carb Service Kit, 39 pieces, Yamaha FZR400 1WG
1 x CLIP-0600 - Clip, M6 (10 pieces)
1 x TPER-0018 - Steering Stopper, NC35
1 x STHB-0072 - Tyga Step Kit Replacement Bush, 72mm
3 x 95701-08022-00 - Bolt, Flange 8x22
2 x CKA-Honda-MC19 - Carb Service Kit A, 16 pieces, Honda CBR250R MC14, MC17 & MC19
1 x SCRE-0144 - Screen Double Bubble Dark Tint, ZXR400A, Kit.
1 x EXCB-0047R - Exhaust Chamber, Right, 250V, MC28
2 x EXMC-0007 - Clamp, Manifold, RGV250/Aprilia RS250
1 x EXCB-0010L - Exhaust Chamber, Left, GP Type, Stainless Steel, RGV250, VJ22
2 x TYTO-0004B - Kevlar/Kevlar Workshop Tray, Small (300x200x1.2mm)
1 x EXCB-0003R - Exhaust Chamber, Right, Side By Side Type, Stainless Steel, MC18
1 x EXSL-0068(p) - Silencer, GP-T, Carbon, Two Stroke, Spring Mounted.
1 x 99101-KPE-1350 - Main Jet, KEIHIN, (99101), #135
2 x EXPS-0064 - Set, Pipe, Full System, Underbelly, MSX125 Grom, Stainless Oval/Carbon End Cap, Long
2 x EXPS-0095 - Set, Pipe, Full Race System, Ninja 300R, Moto Maggot Silencer
2 x BPAC-0012 - Seal Gap, Universal (Airbox) 100cm
2 x EXPS-0056 - Set, Pipe, Full Race System, CBR300R/CBR300F, Round Aluminium Silencer, Carbon End Cap.
2 x 90106-KGH-600 - Bolt, Front Brake Rotor Mounting
1 x CKB-Honda-NC29 - Carb Service Kit B, 19 pieces, Honda CBR400RR NC29
2 x EXSL-0081 - Silencer, Round, Carbon/Carbon End Cap, 2 Inch x 380mm, Assy
2 x SCRE-0170 - Screen Tint, TYGA style, Ninja 400, Kit
2 x TPER-0048 - Carbon Reeds, Cagiva Mito 125
3 x TPER-1044 - Woodruff Key, Offset, 1 Degree, NSR250
1 x TYLY-0299 - Chain Slider (set), VFR400R NC30
2 x SCRE-0152 - Screen Dark Tint, Stock Shape, 1998-2006 Aprilia RS250, Kit.
3 x BPAC-0015 - Set, Windscreen Molding, and Clips
2 x TYTO-0011ASET - Carbon/Carbon Workshop Tray, Large (360x240x1.2mm) Set of 10 pcs
1 x CHSS-0840 - Caphead Bolt, Stainless, M8x40
2 x TMER-0132 - TYGA Bike Dust Cover, Red/Black, DUCATI
2 x BPCG-0006 - Fuel Tank, Carbon, NSR500V NX6
1 x EXCB-0027 - Exhaust Chamber, Clearcoated Mild Steel, KRR150ZX
2 x EXMC-0020 - Clamp, Manifold, RGV250 VJ23
1 x BPAC-0016 - Rubber Shield, Head Light, Pair, NC30, NC29, MC22
2 x SCRE-0160 - Screen, Dark Tint, Stock Shape, 1996-97, Aprilia RS250, Kit
2 x BPFG-0007 - Fuel Tank, GRP, VFR750R RC30, Unpainted
1 x EXCS-0050 - Set, Exhaust Chamber, Yamaha RX-Z 135
1 x TMER-0164 - TYGA Bike Dust Cover, Blue/Black, Suzuki RGV (race)
2 x BPFS-250VREPSOL - Kit, GRP, Complete bodywork set with Fuel Tank and Front Fender, painted Repsol, MC21, MC28 NSR250V
1 x TWDS-0005 - Tyre Warmers, Lightweight Sports, Blue
2 x EXPS-0160 - Set, Pipe, Full Race System, WSS300, KTM RC390 2022-2024
2 x 61100-K94-TOOZA - Front Fender Comp, FR 61100-K94-T00ZA
1 x 96211-06000 - Ball, Steel #6
1 x BPSY-0325L - Stay, Standard, Side Cowl, Left, NC30
1 x VHM-NSR250MC16 - VHM Cylinder Head Set NSR250 MC16
2 x TPER-0049 - Carbon Reeds, Honda NS400
2 x MG362-250-TRCL-19 - Rear Shock, YSS, Full Adjustment, MSX125 Grom
4 x TYLY-1114 - Tank Filler Cap, Keyless, Racing Type, Kawasaki, Type 5
3 x TYSR-0112-41T - Sprocket, Rear 41T, #520, Aluminium, (Gold)
1 x TYTO-0011A - Carbon/Carbon Workshop Tray, Large (360x240x1.2mm)
1 x EXPS-0110 - Set, Pipe, Full System, Underbelly, Monkey 125, Stainless Oval/Carbon End Cap, Short
1 x EXTP-0035 - Tail Pipe, Stainless Steel, YZ250
1 x EXMN-0011 - Collar, Manifold, Mild Steel, KRR150
1 x EXMN-0050 - Collar, Manifold, Yamaha RX-Z 135
1 x BPCG-0001 - Fuel Tank, Carbon, NSR250, MC28
1 x TYTO-0011DSET - Carbon/Kevlar Workshop Tray, Large (360x240x1.2 mm) Set of 10 pcs
1 x EXPS-0080 - Set, Pipe, Full Race System, Ninja 250R, Round Aluminium Silencer
2 x EXMN-0020 - Collar, Manifold, RGV250 VJ23
1 x TWDS-0005Black - Tyre Warmers, Lightweight Sports, Black
2 x EXSL-0065 - Silencer, Shorty, Carbon, Two Stroke, Assy.
1 x EXPS-0034 - Set, Pipe, Slip On, MSX125 Grom 2013-14, Moto Maggot Silencer
4 x TPER-0022 - Flange, Silencer Mounting, Mild Steel
1 x STHB-0015 - Bush, 8mm x 20mm x 15mm
1 x EXPS-0035 - Set, Pipe, Slip On, Ninja 250R/300R 2013-, Moto Maggot Silencer
1 x EXPS-0023 - Set, Pipe, Half, Race System, ER6, Moto Maggot Silencer
1 x BPFG-0008red/white - Fuel Tank, GRP, RVF400 NC35, Painted Red/White
2 x EXOR-0001 - O Ring, Aprilia/RGV250 Exhaust Manifold (single)
1 x EXPT-0074 - Section, Header, Stainless, Monkey 125
1 x EXCB-0009R - Exhaust Chamber, Right, Side By Side Type, Stainless Steel, RGV250 VJ22
1 x EXCB-0007L - Exhaust Chamber, Left, Side By Side Type, Stainless Steel, Aprilia RS-250
1 x TYLY-0115 - Tank Filler Cap, Keyless, Racing Type, Kawasaki Type 2
1 x EXMS-0035 - Mount Stay, KRR150ZX
1 x BPSY-0209 - Shim, Side Stand, Yamaha RD350LC (4L0)
1 x EXSL-0080 - Silencer, Carbon, Round, 2 Inch x 380mm, Assy
1 x EXSL-0067 - Silencer, Shorty, Aluminium Premium, Two Stroke, Assy.
3 x EXOR-0039 - O-Ring Viton, ID 45mm, THK 2mm
1 x TYTO-0004C - Kevlar/Carbon Workshop Tray, Small (300x200x1.2mm)
1 x 90102-GT4-000 - Bodywork mounting bolt, NSR150SP
1 x TYTO-0011D - Carbon/Kevlar Workshop Tray, Large (360x240x1.2mm)
1 x JTST-0420 - Domehead Bolt M4x20 (10 pieces)
1 x INAL-0500 - Insert Aluminium EM5 (10 pieces)
1 x JTST-0515 - Domehead Bolt M5x15 (10 pieces)
2 x CLIP-0500 - Clip, M5 (10 pieces)
2 x 83641-MR8-000 - Bolt, Bodywork
1 x NUBO-0006 - R clip 42mm, HRC style
1 x TYTO-0011BSET - Kevlar/Kevlar Workshop Tray, Large (360x240x1.2mm) Set of 10 pcs
1 x STHB-0005 - Spacer, 26mm x 5mm
1 x EXOR-0035 - O-Ring NBR, ID 19 mm x 2mm
2 x 83551-300-000 - Case Grommet
2 x BPSY-0306 - Stay, Rear Brake Reservoir, GROM
1 x JTST-0610 - Domehead Bolt M6x10 (10 pieces)
1 x 83642-KY2-700 - Col Side CW Set
2 x BPSY-0239 - Fender Stay, CBR600RR Conversion, Set
1 x TYLY-0033 - Stay, Exhaust, Twin Stack, Street, NC30/35, TYGA
1 x EXPT-0077 - Section, Header, Stainless, WSS300 Race System, KTM RC390/390 Duke
1 x EXPT-0008 - Section, Pipe, Stainless, CBR150
2 x EXPT-3119 - Section, Header, Rear Left, Stainless, VFR750F, 4th Gen, 94-97
1 x EXMS-0119 - Mount Stay, VFR750F, 4th Gen, 94-97
1 x EXPT-0005 - Section, Pipe, Underbelly, Full Race System, MSX125 Grom
1 x EXPT-4119 - Section, Header, Rear Right, Stainless, VFR750F, 3rd & 4th Gen
1 x EXSL-0014 - Section, Mesh Slip-On, Stainless, Yamaha R25/R3
1 x EXPS-0100 - Set, Slip-On, Stainless Moto Maggot, 43 mm, Ninja 400
1 x TPER-0014-3 - Pro-Arm Wheel Spacer, 3mm
1 x EXPS-0061 - Set, Pipe, Race System, Serpent, KTM RC390, 2014-2016, Stainless Oval/Carbon End Cap
1 x TYLY-0109 - Rear Stand Bobbins, Silver, M6, Assy.
1 x EXPS-0060 - Set, Pipe, Slip On, Carbon, Oval/Carbon End Cap, Yamaha R25/R3
1 x BPCX-0018 - Air Ducts, Pair, Carbon, NC35
1 x EXPS-0128 - Set, Pipe, L.H Exit, Full Race System, VFR750F, 4th Gen, 94-97 Round Stainless Silencer
1 x EXSL-8013(p) - Silencer, Stainless Moto Maggot, 35 mm., MSX125 Grom, No fittings
1 x EXCS-0027 - Set, Exhaust Chamber, Clearcoated Mild Steel, KRR150ZX
1 x BPCG-0007 - Fuel Tank, Carbon, VFR750R RC30
1 x BPCG-0002 - Fuel Tank, Carbon, RS250R NX5 (Ram Air Type)
1 x EXCB-0020R - Exhaust Chamber, Right, Side By Side Type, Stainless Steel, RGV250 VJ23
1 x EXPT-1151 - Section, Header, Front Left, Stainless, VFR750F, 3rd Gen, 90-93
1 x EXCB-0010R - Exhaust Chamber, Right, GP Type, Stainless Steel, RGV250, VJ22
1 x EXCB-0031L - Exhaust Chamber, Left, Side By Side Type, Stainless Steel, RGV250 VJ21
1 x EXCL-0004 - Clamp, Silencer, GP, 70mm (2x Bolt)
1 x EXPT-0055 - Section, Right #1, KTM RC390 Serpent
1 x EXCB-0026Stealth - Exhaust Chamber, Stealth, Mild Steel, Flat Black Cerakote, KRR150
1 x EXCL-0036 - Clamp, Silencer, Single, Oval, PCX150, Assy.
1 x EXGL-0001 - Cartridge, Long Strand Glass Wool, Two Stroke
1 x EXCB-0006LA - Exhaust Chamber, Left, GP Type, Stainless, MC21
1 x EXMN-0007 - Collar, Manifold, RGV250/Aprilia RS250
1 x EXCB-0005L - Exhaust Chamber, Left, Side By Side Type, MC21/28
1 x TYLY-0052(p) - Exhaust Silencer Hanger Stay Arm, Aprilia RS250
1 x EXCL-0005 - Clamp, Silencer, GP, 70mm (1x Bolt)
1 x EXPT-0022 - Section, Final, Stainless, Kawasaki Z125
1 x EXCL-0010 - Clamp, Silencer, Single, 61mm., Central, Assy.
1 x EXCL-0013 - Clamp, Silencer, Single, 4 inch, Assy.
1 x EXPT-8151 - Section, Secondary B, R.H Exit, VFR750F, 3rd Gen, 90-93
2 x 77228-GBG-850 - Rubber, Seal Lock Bar
1 x 95701-0601608 - Bolt, Flange 6x16
1 x CHSS-0820 - Caphead Stainless, M8x20
1 x 90132-KPP-T00 - Bolt, Bodywork Mounting, non-collared, M6, CBR
1 x 95002-4120-08 - Clamp, D12 Tube
1 x 95701-06012-00 - Bolt, Flange 6x12
1 x 96300-08035-00 - Bolt, Flange, DR, 8x35
1 x BPAC-0014 - Seal Gap, Universal (Airbox) 30cm
1 x JTST-0410 - Domehead Bolt M4x10 (10 pieces)
1 x 90437-GM0-000 - Washer, 6X12.5X2, MC28
1 x EXOR-0054 - O-Ring, NBR, ID10mm.THK : 2.5mm
1 x BPSY-0319D - Stay D, VFR750F, 3rd Gen, 90-93
1 x 95701-08038-02 - Bolt, Flange 8x38
1 x CHSS-0630 - Caphead Stainless, M6x30
1 x 90504-HA0-000 - Washer, Plastic, 9x20
1 x 90130-K26-900 - Screw, pan 6x18
1 x 90310-634-980 - Nut, 6mm, L/H thread, MC28
1 x CLIP-0400 - Clip, M4 (10 pieces)
1 x BPSY-0319C - Stay C, VFR750F, 3rd Gen, 90-93
1 x EXOR-0042 - O Ring, RGV250 VJ23 Exhaust Manifold (single)
1 x CHSS-0835 - Caphead Stainless, M8x35
1 x BHSS-0615 - Bolt, Button Head, M6x15, Stainless
1 x CHSS-0825 - Caphead Stainless, M8x25
1 x 61104-428-730 - Collar, front fender
1 x 90107-KTL-740 - Screw, Cowl Setting, A
1 x 96300-08025-00 - Bolt, Flange, M8x25
1 x 96300-06032-00 - Bolt, Flange, M6x32
1 x JTSB-0615 - Domehead Bolt, Black, M6x15
1 x 95701-06018-00 - Bolt, Flange, M6x18
1 x 95701-0601408 - Bolt, Flange 6x14
1 x TYTO-0011MIX - Set of 10 Workshop Trays, Large (5x Carbon/Carbon and 5x Kevlar/Kevlar) 360x240x1.2mm
1 x 83641-KY2-700 - Spacer, Side Cowl. Setting
1 x CHSS-0815 - Caphead Stainless, M8x15
1 x EXOR-0012 - Replacement O-ring, Exhaust Valve Cover, RGV250/Aprilia RS250
1 x BPFL-7328USED - Under Cowl, Belly Exhaust Type, (GRP), Yellow, MSX125SF/GROM, USED
1 x BPCH-7228USED - Splash Guard, Carbon, MSX125SF Grom, USED
1 x EXSL-0040(p)USED - Silencer, Aluminium, Round, 2 inch x 380 mm., No Fittings, USED
$46,442.06US

Currencies

Notifications

Notify me of updates to Harness, Lambda, Ninja 250/300 2013-2018

Harness, Lambda, Ninja 250/300 2013-2018
Part Number: TYWH-0001
Ninja 250R/300R, 2013-2018

$17.13US

Harness, Lambda, Ninja 250/300 2013-2018Part Number: TYWH-0001Ninja 250R/300R, 2013-2018

$17.13US

Harness, Lambda, Ninja 250/300 2013-2018
Part Number: TYWH-0001
Ninja 250R/300R, 2013-2018