Race Airbox, Ram Air, GRP, NC35
This race air box has a larger and longer inlet than stock to allow for greater airflow and better breathing including ram air affect. Unlike other similar products available, as well as the modified inlet, this air box increases the volume by 8% overstock for more stable performance. Uniquely, among aftermarket suppliers, the Tyga air boxes retain the correct profile on the base for an effective seal when installed just like the original air box.
Note, this is a pure race air box and is designed to be used with no air filter. Setting up of the carbs will be required. The HRC setup manual recommends #152 in the rear bank and #142 in the front bank. However, this is of course in conjunction with a full HRC carb kit which is no longer available. We recommend to start with main jets of approx. #160 front and rear and jet from there. Be prepared to make jet changes to get optimum performance. Stock needles may need a 0.5mm shim under them to richen them up a little. The #35 slow jets are what the HRC setup manual recommends.
For street bike air box lid type with air filter, see BPCX-9009.
