Triple Clamp Set, CNC, Silver 3D Top Triple Clamp, Black Lower Clamp, NC35 Forks to fit MC22

Triple Clamp Set, CNC, Silver 3D Top Triple Clamp, Black Lower Clamp, NC35 Forks to fit CBR250RR MC22

CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.

Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.

They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation.

Note this is a race triple clamp set and there is no provision for ignition lock or steering lock when used on the MC21. The ignition lock need to be be relocated

Tightening recommendations:

Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.

This product contains the following items:
	1 x	(53214-371-010) Seal, Headstock Lower	$16.73US
	1 x	(91015-KT8-005) Bearing Headstock Upper	$30.98US
	1 x	(91016-KT8-005) Bearing Headstock Lower	$40.28US
	1 x	(TYLY-0127) Top Triple Clamp Nut (M24x1), TYGA	$19.04US
	1 x	(TYLY-0059C) Lock Nut, Preload, Triple Clamp, M26 x1mm.	$9.03US
	2 x	(TYLY-1170D) Spacer, Top, Triple, MC18	$6.42US
	1 x	(TPER-1130) Special Steering Stopper, CBR250RR MC22	$16.67US
	1 x	(TYLY-1331) Lower Triple Clamp, CNC Black, NC35 Forks, CBR250RR MC22 Shaft	$329.77US
	1 x	(BPSY-0293) Washer, Lock, Special	$7.65US
	1 x	(TYLY-0287) 3D Upper Triple, Silver, Honda type	$162.61US
Cost of separate parts: $645.59US
You save $32.27US