Triple Clamp Set, CNC, Silver 3D Top Triple Clamp, Black Lower Clamp, NC35 Forks to fit MC21/
Part Number: TYLY-3304
NSR250 MC21, MC28

Triple Clamp Set, CNC, Silver 3D Top Triple Clamp, Black Lower Clamp, NC35 Forks to fit NSR250 MC21/MC28

Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.

They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the 'bolt-on' ignition switch/lock holder fitted, which can be removed for racing.

The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.

---

Note this is a race triple clamp set and there is no provision for ignition lock or steering lock when used on the MC21. The ignition lock can be relocated to the rear frame to fairing stay on the left side

---

Tightening recommendations:

Lower clamp pinch bolts: 23Nm.

Top clamp pinch bolts: 23Nm.

 

This product contains the following items: 1 x   (53214-371-010) Seal, Headstock Lower  $16.84US 1 x   (91015-KT8-005) Bearing Headstock Upper  $31.18US 1 x   (91016-KT8-005) Bearing Headstock Lower  $40.55US 1 x   (TYLY-0127) Top Triple Clamp Nut (M24x1), TYGA  $19.16US 1 x   (TYLY-1342N) Lower Triple Clamp, CNC Black, RVF400 forks/NSR shaft  $331.92US 1 x   (TYLY-0287) 3D Upper Triple, Silver, Honda type  $163.67US Cost of separate parts: $603.33US You save $30.16US