Triple Clamp Set, CNC, 3D, Silver, NC35 Forks to fit NSR250 MC18
CNC machined TYGA triple clamp set for the MC18 to take NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Note this is a race triple clamp set and there is no provision for ignition lock or steering lock. The ignition lock has to be relocated.
Tightening recommendations:
- Lower clamp pinch bolts: 23Nm.
- Top clamp pinch bolts: 23Nm.
|
This product contains the following items: |
 | 1 x | (53214-371-010) Seal, Headstock Lower | $16.72US |
 | 1 x | (91015-KT8-005) Bearing Headstock Upper | $30.95US |
 | 1 x | (91016-KT8-005) Bearing Headstock Lower | $40.25US |
 | 1 x | (TYLY-0127) Top Triple Clamp Nut (M24x1), TYGA | $19.02US |
 | 1 x | (TYLY-1170D) Spacer, Top, Triple, MC18 | $6.41US |
 | 1 x | (TYLY-0287) 3D Upper Triple, Silver, Honda type | $162.47US |
 | 1 x | (TYLY-0347) Lower Triple Clamp, CNC Silver, NC35 Forks, MC18 Shaft | $329.47US |
Cost of separate parts: $605.29US | | You save $30.28US |
|
Available Options:
Lower Triple Clamp Bore Size:
Top Triple Clamp Bore Size:
