Kit, Seat Set, Street, NC30 Two Seat
Practicality
This seat cowling kit retains the stock NC30 subframe and passenger seat so it is possible to carry a passenger as well as keep the luggage compartment. The kit re-uses the original Honda seat pads, locks and latch mechanism.
This kit is designed to give the NC30 a modern appearance while at the same time being a practical every day bike. The kit is supplied with all the mounting hardware and lighting and is straight forward to install with a stock machine as a starting point.
The seat cowling keeps the tank in the stock position and the fuel cock is accessible.
Compatibility
This kit can be used with either stock Honda fairings or TYGA ones such as BPFS-0092 as shown in these photos. If used with BPFS-0032, some repositioning of the side stays is required because BPFS-0033 is designed for a slightly raised rear position on the fuel tank. For all other TYGA fairings, no modifications are required and the seat cowling kit can be installed without affecting the fairing.
Fitting Instructions here: 
This product is designed for the NC30. To use it with the NC35 is possible but it will require NC30 seats, the NC30 subframe and some modification of the electrical component positions as well as stays for the front fuel tank mounting positions.
|
This product contains the following items: |
 | 1 x | (BPLT-0009) Tail Light unit, LED, Flat, Assy. | $32.14US |
 | 1 x | (BPFX-9117) Rear Fender Special, GRP, NC30 Two Seat | $248.04US |
 | 1 x | (BPFT-9117) Seat Cowling, GRP, NC30 Two Seat | $221.87US |
 | 1 x | (BPFC-9117) Side Cover, Pair, GRP, NC30 Two Seat | $27.72US |
 | 1 x | (BPLT-0020R) Rear Right Indicator | $41.26US |
 | 1 x | (BPLT-0020L) Rear Left Indicator | $41.26US |
 | 1 x | (BPAC-1002) TYGA Radiator Overflow Bottle Kit, Assy. | $23.55US |
 | 1 x | (BPAC-1001) TYGA Brake Reservoir Kit | $31.40US |
Cost of separate parts: $667.24US | | You save $33.35US |
|
