Triple Clamp Set, 3D, CNC Silver, CBR600RR to fit MC21/MC28
CNC machined TYGA triple clamp set for the NSR250 MC21/MC28 to take 53 mm diameter CBR600RR forks.
For later model CBR600RR which use 54 mm forks, please change options below
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Note this is a race triple clamp set and there is no provision for ignition lock or steering lock when used on the MC21. The ignition lock can be relocated to the rear frame to fairing stay on the left side.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
|
This product contains the following items: |
 | 1 x | (53214-371-010) Seal, Headstock Lower | $16.73US |
 | 1 x | (91015-KT8-005) Bearing Headstock Upper | $30.98US |
 | 1 x | (91016-KT8-005) Bearing Headstock Lower | $40.28US |
 | 1 x | (TYLY-0127) Top Triple Clamp Nut (M24x1), TYGA | $19.04US |
 | 1 x | (TYLY-0059C) Lock Nut, Preload, Triple Clamp, M26 x1mm. | $9.03US |
 | 1 x | (BPSY-0293) Washer, Lock, Special | $7.65US |
 | 1 x | (TYLY-0287) 3D Upper Triple, Silver, Honda type | $162.61US |
 | 1 x | (TYLY-0942N) Lower Triple Clamp, CNC Silver, CBR600RR Forks, MC21/28 Shaft | $329.77US |
Cost of separate parts: $616.09US | | You save $30.80US |
|
Available Options:
Lower Triple Clamp Bore Size:
Top Triple Clamp Bore Size:
