Set, Pipe, Full Race System, WSS300, (Street) KTM RC390

Set, Pipe, Full Race System, WSS300, (Street) KTM RC390

This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.

And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.

By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.

The system features a primary silencer, which helps reduce the sound level without any loss of performance.

The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.

WEIGHTS

EXPS-0111 and EXPS-0112 ( the full systems) 3.8 kg

Weights Separate parts in the set:

Silencer EXSL-0074 : 1.55 kg
Final section EXPT-0078: 1.3 kg
Header pipe EXPT-0077: 0.6 kg
all other components (manifold clamp, db killer, heat shield hoses etc) 0.35

Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.

As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.

Main Pipe	Silencer	Decidel Killer	Idle	3,000rpm	5,000rpm	7,000rpm
Akrapovic	Akrapovic	N/A	91	95	101	106
Akrapovic	TYGA	No	91	95	100	106
Akrapovic	TYGA	Yes	85	90	94	101
TYGA	TYGA	No	91	95	99	105
TYGA	TYGA	Yes	85	90	94	100
TYGA	Akrapovic	N/A	91	95	99	10

Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.

Compatible TYGA-Performance Belly Pans are:

BPFL-7431 ( GRP)
BPFL-7431 ( GRP, Painted White)
BPCL-7431 (Carbon)

Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112

Fitting Instructions:

This product contains the following items:
	6 x	(EXSG-0002) Spring, Exhaust, Swivel Head	$1.89US
	1 x	(EXPT-0077) Section, Header, Stainless, WSS300 Race System, KTM RC390/390 Duke	$203.76US
	1 x	(EXPT-0078) Section, Final, Stainless, WSS300 Race System, KTM RC390 2014-2021	$384.37US
	1 x	(EXDK-0006) Decibel Killer, Silencer, Stainless, 42.5mm	$20.15US
	1 x	(EXMC-0015) Manifold Clamp, WSS300 Race System, KTM RC390/390 Duke	$14.09US
	1 x	(EXMN-0015) Manifold, WSS300 Race System, KTM RC390/390 Duke	$24.72US
	1 x	(TPER-0066) Water Hose, Head Conversion, KTM RC390/390 Duke	$14.09US
	1 x	(BPSY-0240) Radiator Hose Blank, 19mm, Kit, KTM RC390/390 Duke	$11.09US
	1 x	(EXMS-0020) Frame Mount Stay, WSS300 Race System, KTM RC390/390 Duke	$14.80US
	1 x	(EXSL-0074(p)) Silencer, Stainless, Round, WSS300, (Street) KTM RC390, No fittings	$312.91US
	1 x	(BPCC-0048) Silencer Guard, Carbon, (Street) WSS300 Race System, KTM RC390	$129.55US
Cost of separate parts: $1,140.86US
You save $40.33US