Triple Clamp Set, CNC, 3D, Silver, NC35 Forks to fit CBR250RR MC22

Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22

CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.

Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.

They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut and special steering stopper, to complete the transformation.

Note this is a race triple clamp set and there is no provision for ignition lock or steering lock The ignition lock has to be be relocated

Tightening recommendations:

Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.

This product contains the following items:
	1 x	(53214-371-010) Seal, Headstock Lower	$16.77US
	1 x	(91015-KT8-005) Bearing Headstock Upper	$31.05US
	1 x	(91016-KT8-005) Bearing Headstock Lower	$40.38US
	1 x	(TYLY-0127) Top Triple Clamp Nut (M24x1), TYGA	$19.08US
	1 x	(TYLY-0059C) Lock Nut, Preload, Triple Clamp, M26 x1mm.	$9.05US
	2 x	(TYLY-1170D) Spacer, Top, Triple, MC18	$6.43US
	1 x	(TPER-1130) Special Steering Stopper, CBR250RR MC22	$16.71US
	1 x	(BPSY-0293) Washer, Lock, Special	$7.66US
	1 x	(TYLY-0287) 3D Upper Triple, Silver, Honda type	$162.98US
	1 x	(TYLY-0331) Lower Triple Clamp, CNC Silver, NC35 Forks, CBR250RR MC22 Shaft	$330.52US
Cost of separate parts: $647.08US
You save $32.34US