Triple Clamp Set, CNC Black, CBR600RR Forks to fit MC21
CNC machined TYGA triple clamp set for the MC21 NSR250 to take 53 mm diameter CBR600RR forks.
For later model CBR600RR which use 54 mm forks, please change options below
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the 'bolt-on' ignition switch/lock holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Note, we recommend using Handlebar set 48 mm. TYLY-0012 when installing this triple clamp set for best clearance issue with the NSR fairing.
- Lower clamp pinch bolts: 23Nm.
- Top clamp pinch bolts: 23Nm.
This product contains the following items:|
|1 x || (53214-371-010) Seal, Headstock Lower|| $16.91US|
|1 x || (91015-KT8-005) Bearing Headstock Upper|| $31.30US|
|1 x || (91016-KT8-005) Bearing Headstock Lower|| $40.70US|
|1 x || (TYLY-1141) Ignition Switch Holder, CNC Black, NSR250, MC21|| $50.20US|
|1 x || (TYLY-0127) Top Triple Clamp Nut (M24x1), TYGA|| $19.23US|
|1 x || (TYLY-1059(p)) Top Triple Clamp, CNC Black, CBR600RR forks NC35/NSR250/MC22 Conversion|| $136.94US|
|1 x || (TYLY-0059C) Lock Nut, Preload, Triple Clamp, M26 x1mm.|| $9.12US|
|1 x || (TYLY-1942N) Lower Triple Clamp, CNC Black, CBR600RR Forks/NSR Shaft|| $333.20US|
|1 x || (BPSY-0293) Washer, Lock, Special|| $7.72US|
Cost of separate parts: $645.33US
|You save $32.26US|
Lower Triple Clamp Bore Size:
Top Triple Clamp Bore Size: