Set, Exhaust Chamber, Side By Side Type, Stainless Steel, NSR250 MC18

Set, Exhaust Chamber, Side By Side Type, Stainless Steel, NSR250 MC18

Tyga Performance is probably the only company offering stainless steel expansion chambers for the MC18. These exquisitely crafted pipes are designed to give maximum power, while at the same time to give sufficient clearance for the MC18 swing arm; quite a demanding feat but one achieved by the curving the header design. This system has the two silencers exiting, not unlike the 1989 MC18 stock system, in the high level left and right position and the silencer clamps are provided which mount onto the stock 1989 silencer mounting brackets.

For the 1988 MC18, this system can be installed but requires removal of the passenger footpeg hangers and replaced with special TYGA silencer brackets (not included in this set) So for 1988 owners, remember to order 2 x BPSY-0130

Tyga Performance NSR250 exhausts are supplied with a double 'O' ring header joint for superior sealing and vibration isolation. In addition, the 'O' rings are made from Viton which are resistant to automotive fluids and better able to withstand higher temperatures.

For replacement O-Rings please see EXOR-0039

Parts included with this product:

1 x left side chamber, side by side (left exiting) stainless steel
1 x right side chamber, side by side (right exiting) stainless steel
2 x silencer single clamps and mounting bolts, washers and nuts

2 x manifolds
2 x mounting flanges
4 x mounting springs

1 x Radiator lower mounting stay

1 x lower cowling rear mounting stay

2 x universal aluminium silencer stays

4 x Viton O-Rings

Not included are the silencers which you need to select from our choice of aluminium, carbon and carbon/Kevlar types. Important! To complete your Tyga exhaust system remember to order 2 silencers with every chamber set.

This product contains the following items:
	4 x	(EXSG-0001) Spring, Exhaust, Two Stroke	$1.49US
	2 x	(EXCL-0009) Clamp, Single, 61mm, Offset	$11.35US
	2 x	(EXMC-0001) Clamp, Manifold, NSR150/250	$5.06US
	2 x	(EXMN-0003) Collar, Manifold, NSR250	$35.43US
	1 x	(EXCB-0003L) Exhaust Chamber, Left, Side By Side Type, Stainless Steel, MC18	$450.72US
	1 x	(EXCB-0003R) Exhaust Chamber, Right, Side By Side Type, Stainless Steel, MC18	$466.91US
	4 x	(EXOR-0039) O-Ring Viton, ID 45mm, THK 2mm	$1.71US
	2 x	(TYLY-0252) Stay, Silencer, Aluminium, Universal	$7.79US
Cost of separate parts: $1,049.67US
You save $56.40US