Sprockets
Upgrade your bike with high quality and lightweight TYGA Sprockets as used by the SAG Team in the Moto2 World Championship.
Designed and machined in house from super strong 7075 T6 aluminium, and then anodized for superior corrosion and abrasion resistance.
Please note that 2013 model 200 Duke use the 4 hole sprocket pattern whereas the 2014 on uses the 6 hole. Be sure to check your bike before ordering.
New Products For May
Categories
- 1 x TYLY-0017 - Meter Stay, NC35, Stock Type, Assy.
- 1 x BPCX-7331L - Side Cowling B, Left, Race, Carbon, KTM RC125, RC200, RC250, RC390
- 1 x BPCC-7035 - Heel Guard, Carbon, Pair, Honda JC22 NSR125
- 1 x TMER-0160 - TYGA Bike Dust Cover, Red/Black, Race, GP125/Moto3 type
- 1 x TYLY-0159 - Handlebar Set, Silver, NX5
- 1 x 90320-GC3-000 - Clip, Cowling, 5mm, NSR150SP
- 1 x CKA-Suzuki-GSXR750-M - Carb Service Kit A, 28 pieces, Suzuki GSXR750-M
- 1 x TYLY-0124 - Upper Fairing Stay, Pair,NF5 RS250R
- 1 x CK-Yamaha-1WG - Carb Service Kit, 39 pieces, Yamaha FZR400 1WG
- 1 x TYLY-0167 - Clutch Lifter Plate, Billet, Grom
- 1 x NUBO-0001 - R-Clip, Wheel axle, Honda Pro-arm
- 1 x BPCC-9010R - Heel Guard, Right Only, Carbon
- 1 x TYLY-1099 - Front Fork Preload Adjusters, Black/Gold, Pair, Ninja 400
- 1 x BPCC-9002 - Heel/Brake Guard, Tyga, Right, Carbon
- 3 x TPER-0039 - Wheel, Rear. Aluminium Spacer kit, NSR250 MC21
- 2 x CKA-Honda-VFR750F-RC36 (90-93) - Carb Service Kit A, 40 pieces, Honda VFR750F RC36 (90-93)
- 1 x SCRE-0079 - Screen Clear, TYGA RSW style, Kit
- 3 x BPFS-0224 - Carbon Set, Side Covers and Seat Cowling, CB400 Super Four (1992-1996)
- 2 x EXSL-0003 - Silencer, Carbon, Two Stroke, Assy.
- 2 x TYLY-0227 - Stay, Upper, Ram Air, NX5
- 1 x SCRE-0130 - Screen dark tint, Double Bubble, RGV250 VJ22, Kit.
- 2 x VHM-NSR250MC16 - VHM Cylinder Head Set NSR250 MC16
- 3 x BPFU-0010 - Upper Cowling, Street, GRP, NC30, Suzuka Style, Assy.
- 1 x BPFF-7206 - Front Fender, GRP, 2007-16 CBR600RR
- 2 x BPFS-0039 - Kit, GP Fairing Set, Race, VJ22 RGV250
- 2 x BPCC-0006 - Carbon Meter Cover MC18, NC23, NC30
- 1 x CHSS-0840 - Caphead Bolt, Stainless, M8x40
- 1 x 77228-GBG-850 - Rubber, Seal Lock Bar
- 2 x BPFS-0017 - Kit, Seat Set, Street, MC22 RC211V
- 2 x TYLY-0067 - Front Fork Preload Adjusters, Pair, CBR250R/CBR300R
- 3 x TYLY-0233 - Upper Stay, Pair, NSR250V
- 2 x LEVB-7003 - Brake Lever CNC, TYGA, Adjustable, Flip-Up Type
- 2 x BPCC-7548 - Engine Cover, Right, Carbon, GROM (5 speed engine)
- 3 x TPER-0001 - Hi Flo reeds, MC21/MC28, Assy.
- 2 x BPSY-0325R - Stay, Standard, Side Cowl, Right, NC30
- 1 x BPCC-9032R - Side Cover, Right, Carbon, MiniRacerXtreme, MSX125 Grom
- 2 x 64102-MA3-720 - Clip, Screen Molding
- 1 x BPFF-0001 - Front Fender, GRP, NSR250 GP
- 2 x CARB-0001(MC16,18,21) - Carb Service Kit, 7 pieces, Honda NSR250 MC16, MC18, MC21 (1 carburettor)
- 2 x TYSR-0104-41T - Sprocket, Rear 41T, #520, Stock, Aluminium, (Gold), MC18
- 3 x BPCC-0002 - Carbon Tank Filler Cap Cover Honda
- 2 x BPSY-0323 - Side Mount, Lower Cowl, NC30
- 2 x 70-525-61040 - Brake Lever, CNC, NSR250/NC29/NC30/NC35
- 2 x TYLY-0127 - Top Triple Clamp Nut (M24x1), TYGA
- 2 x BK6-F1511-00-PO - Front Fender, Blue, Yamaha YZF-R15
- 2 x BPCC-0066 - Stay, Horn, Carbon, NSR250 MC21/MC28
- 1 x TMER-0137 - TYGA Bike Dust Cover, Red, HRC (race)
- 2 x BPCC-7001R - Frame Cover, Right, Carbon, 2008-16 CBR1000RR
- 1 x BPFL-9125 - Lower Cowling, GRP, MC22 Stock Shape, Right
- 2 x SCRE-0147 - Screen Clear, Double Bubble, NSR150SP, Kit.
- 3 x TYLY-0297 - Set, GPS Blank Plug and Blank Plug Holder
- 2 x SCRE-0151 - Screen, Light Tint, Stock Shape, 1998-2006 Aprilia RS250, Kit.
- 3 x TYLY-0267 - Tank Filler Cap, Keyless, Racing Type, KTM, 7 Hole (Central Filler Hole Type)
- 1 x STHB-0005 - Spacer, 26mm x 5mm
- 1 x BPFG-0008 - Fuel Tank, GRP, RVF400 NC35, Unpainted
- 2 x BPAC-0001 - HRC Brake Reservoir Kit
- 1 x TPER-0005 - Power Jet #0, for NSR250 MC18/21/28.
- 2 x SCRE-0094 - Screen Clear, Stock Shape, ZXR250C, Kit.
- 1 x MX366-295-TRC-14-5 - YSS Rear Gas Shock, CBR250R/CBR300R
- 2 x 90102-GT4-000 - Bodywork mounting bolt, NSR150SP
- 3 x 90134-KPP-T00 - Bolt, Instrument Surround Mounting, collared, M5, CBR
- 2 x EXSL-9005 - Silencer, Aluminium Premium, Two Stroke, Assy.
- 2 x TPER-2044 - Woodruff Key, Offset, 2 Degrees, NSR250
- 1 x 64105-KV3-505 - Rubber Molding, Fuel Tank.
- 1 x BPCX-9101 - Tank Cover Front Stock, Carbon, NC35
- 2 x EXPS-0112 - Set, Pipe, Full Race System, WSS300, (Race) KTM RC390
- 2 x BPFS-250VREPSOL - Kit, GRP, Complete bodywork set with Fuel Tank and Front Fender, painted Repsol, MC21, MC28 NSR250V
- 2 x Many - Keihin Main Jet Category Link. Order from Left menu >By Product> Main Jet
- 1 x BPSY-0204 - Mirror Rubber, Pair, NC30
- 2 x TYLY-0225 - Subframe, Aluminium, Race, NC35
- 2 x TYLY-0101 - Front Brake Reservoir Cover, RED, TYGA, MSX125 Grom
- 1 x TWDS-0007Black - Tyre Warmers, Superbike, Black
- 1 x BPCX-0032 - Air Box, Carbon/Kevlar, RS250, NXA, Kit
- 1 x TYLY-0001 - Upper Stay, MC18/MC21/MC28, GP Type, Assy.
- 2 x TMER-0169 - TYGA Bike Dust Cover, Red/Black, Force V4 VFR400R
- 1 x BPFT-0011 - Seat Cowling, GRP, RC30, Stock Shape, Street, Assy
- 1 x MO302-260T-02-858 - YSS Rear Gas Shock, NSR150SP, Pro Arm
- 1 x TYLY-0251 - Coolant Reservoir Fitting Kit
- 1 x BPCF-9002 - Front Fender, Carbon, NC29-30 2006 RC211V Style
- 2 x BPSP-0002 - Seat Bum Stop, large
- 2 x BPFS-0015 - Kit, Upper Fairing Set, Street, MC22 RC211V
- 2 x NHPS-0006 - Bottom End/Crankshaft Rebuild Kit MC21/28 SE/SP, Assy.
- 2 x BPCC-9011 - Heel Guard, Pair, Carbon, ER6
- 2 x BPFL-7050 - Belly Pan, GRP, Stock Shape, Yamaha RX-Z 135
- 1 x TYPP-0014 - Oil Seal, NOK, 26x42x8mm
- 1 x TYLY-0004 - Meter Stay, MC21, Assy.
- 2 x STAA-0003 - Racing Step Kit, NC30/35
- 1 x BPCX-9046 - Bracket, Seat, Carbon, RGV250 VJ23
- 3 x BPFS-0003 - Kit, Seat Set, Street, MC21 GP
- 1 x BPFS-0198 - Kit, Seat Set, GRP, (Race), MC21, MC28, NSR250V
- 2 x BPCX-7002 - Chain Guard, Carbon, 2004-8 Yamaha R1
- 2 x BPCX-9010 - Race Air Box Lid, Carbon, MC21/MC28
- 2 x TYLY-0009 - Rear Stand Bobbins, Silver, M8, Assy.
- 2 x EXCS-0050 - Set, Exhaust Chamber, Yamaha RX-Z 135
- 1 x STAA-0017 - Racing Step Kit, KRR150ZX
- 2 x TYTO-0009 - Castle Nut Tool, NSR150SP
- 1 x TYTO-0026 - Flywheel Holder / Pin Tool
- 1 x BPFS-0211 - Kit, GRP, Complete Bodywork Set, NC35, Street Stock Shape, Twin Seat, Painted (RR) 1994
- 1 x TYLY-0299 - Chain Slider (set), VFR400R NC30
- 1 x BPFS-0052 - Kit, Complete Body Set, Street, MC22 T8
- 1 x BPFL-9014 - Lower Cowling, GRP,NSR250, RSW style, Assy.
- 2 x EXCS-0005B - Set, Exhaust Chamber, Side By Side Type, Stainless Steel, NSR250 MC28
- 1 x 82027-N99-000 - Genuine HRC Brake Reservoir Sock
- 2 x BPCC-9112 - Swing Arm Cover, Pair, Carbon, 1998-2006 Aprilia RS-250
- 2 x BPFS-0040 - Kit, GP Fairing Set, Street, VJ22 RGV250
- 1 x BPAC-0015 - Set, Windscreen Molding, and Clips
- 3 x BPCG-0005 - Fuel Tank, Carbon, VFR400R NC30
- 1 x BPFS-0029 - Kit, Seat Set, Street (with Carbon), NC35, RC211V
- 1 x TPER-0085 - Clutch Upgrade kit, Grom
- 4 x 87124-KPP-940ZA - Genuine HRC sticker (110mm)
- 1 x BPFL-0002 - Lower Cowling, GRP, NSR250 GP, Assy.
- 8 x TPER-0059 - Wheel, Front, Aluminium Spacer Kit, Ninja 400
- 1 x BPCX-7007 - Chain Guard, Carbon, 1996-2012 Aprilia RS-125
- 1 x TYTO-0011MIX - Set of 10 Workshop Trays, Large (5x Carbon/Carbon and 5x Kevlar/Kevlar) 360x240x1.2mm
- 1 x TYLY-0290 - Upper Stay, Stock Shape, NC30
- 1 x TYLY-1011 - Exhaust Stay, Carbon, NC30/35
- 1 x TYLY-0027 - Top Triple Clamp Nut (M24x1)
- 1 x TMER-0147 - TYGA Bike Dust Cover, Red/Black, Gilera
- 1 x 90106-KGH-600 - Bolt, Front Brake Rotor Mounting
- 1 x KOYO-6205-2RS - Bearing, Koyo 6205-2RS
- 1 x TYLY-0237 - Shorty Fuel Tap, NSR250 MC21/MC28
- 1 x 6002-037-00 - Rear Brake Light Switch, Honda Type
- 1 x TPER-0048 - Carbon Reeds, Cagiva Mito 125
- 1 x BPFF-0008 - Front Fender, GRP, CBR929, Stock Shape
- 1 x BPFS-0019 - Kit, Fairing Set, Street NC29 RC211V
- 1 x SCRE-0046 - Screen Clear, NSR150SP, Kit.
- 1 x OSYEP-T92-RF - Key Ring, Honda, Red.
- 1 x SCRE-9011 - Cover, Yellow, Pair, Headlight, Upper Cowling, End
- 1 x STAH-0052 - Tyga Step Kit Replacement Right Side Hanger, NF5 RS250R
- 1 x TYTO-0007 - Flywheel Puller, NSR150SP
- 1 x BPCG-0008 - Fuel Tank, Carbon, RVF400 NC35
- 1 x TPER-0075 - Engine Spacers RGV250 VJ21/VJ22
- 1 x STAA-0011 - Racing Step Kit, MC22 CBR250RR
- 2 x EXPS-0002 - Set, Pipe, Full Race System (No Silencer)
- 1 x BPCC-0017 - Chain Guard, Front, Carbon, VJ22/VJ23 RGV250
- 1 x BPCC-0129 - Cover, Kevlar, ECU, NX5 RS250R
- 2 x STAA-0002A - Racing Step Kit, MC21
- 1 x LEVC-7002 - Clutch Lever CNC, TYGA, Adjustable, Flip-Up Type, Honda Straight Type
- 6 x TMER-0053 - TYGA Bike Dust Cover, Black
- 3 x TYTO-0047 - Seat Lock, Universal, Assy
- 2 x BPCC-7001 - Frame Cover, Pair, Carbon, 2008-16 CBR1000RR
- 2 x BPCC-7131 - Sprocket Cover, (Carbon), KTM 250/390 Duke, RC250/390
- 3 x 99101-MAA-1850 - Main Jet, KEIHIN, (99101), #185
- 3 x TYLY-0199 - Chain Slider (set), RVF400, NC35
- 1 x TPER-0038 - TYGA 300cc water hose, top cylinder
- 1 x BPCC-0028 - Carbon Covers, Set, Instrument Surrounds
- 1 x TYTO-0017 - Spring Puller
- 1 x EXCS-0006A - Set, Exhaust Chamber, GP Type, Stainless Steel, NSR250 MC21
- 1 x TYTO-0010 - Front Fork Overhaul Kit, MSX125 Grom
- 1 x BPSP-0003 - Seat Bum Stop, Small
- 1 x SCRE-0096 - Screen Dark Tint, Stock Shape, ZXR250C, Kit.
- 1 x BPFT-9046 - Seat Cowling ,GRP, Stock Shape, Street, Set, RGV250 VJ23
- 1 x BPLT-0003 - Spark headlight/turn signal assembly
- 1 x BPFS-0094 - Kit, Fairing Set, Street, NSR250 GP2010
- 2 x BPSY-0306 - Stay, Rear Brake Reservoir, GROM
- 1 x EXGS-0001 - Silencer Gasket (3 Hole, 2T)
- 1 x BPAC-0005 - Mini brake reservoir, Carbon
- 1 x SCRE-0026 - Screen Clear, GP250, Kit.
- 1 x STAA-0006 - Racing Step Kit, Aprilia RS-250
- 1 x BPFF-0006 - Front Fender, GRP, Honda RS250, Stock Shape
- 1 x BPFS-0165 - Kit, Seat Set, GRP, Race, NC30 GP-T
- 1 x TYLY-0309 - Rear Stand Bobbins, Silver, M10x1.50 Assy.
- 1 x BPCF-9008 - Front Fender, Carbon, VJ22/VJ23 RGV250
- 1 x TMER-0124 - TYGA Bike Dust Cover, Black, HRC (race)
- 1 x 83641-MR7-000 - Bolt, Bodywork
- 1 x 99996-1364-777(ss) - Kit, Single Seat Cover Conversion, Ninja 250R, Green, Shop Soiled (50% discount)
- 1 x BPCH-7128 - Rear Hugger, Carbon, TYGA Style, MSX125 Grom
- 1 x TMER-0156 - TYGA Bike Dust Cover, Red, Honda Wing, Black
- 1 x BPCC-7027 - Dash Panel, Pair, Carbon, ZX10R 2011-15
- 1 x TMER-0180 - TYGA Bike Dust Cover, Black, Aprilia Racing (Race)
- 1 x BPCX-7428 - Sprocket Cover, Carbon, MSX125 Grom
- 1 x BPCC-7528 - Clutch Cover, Carbon, MSX125 Grom
- 1 x STAP-0001 - Tyga Step Kit Replacement Foot Peg (Long Type), Assy.
- 1 x BPSY-0325L - Stay, Standard, Side Cowl, Left, NC30
- 1 x BPCX-7210 - Chain Guard, Set, Carbon, CBR250RR MC22
- 1 x TMER-0182 - TYGA Bike Dust Cover, Black, Kawasaki Z900RS, Naked bike size.
- 1 x BPCX-7731 - Pillion Seat Cover, Carbon, KTM RC125/200/390 (2022-2024)
- 1 x TYLY-1531 - Top Triple Clamp, and Handlebar Clamp Set, Black, KTM RC Series 2022-2024
- 1 x BPCX-7110 - Air Duct, Carbon Gloss, Pair, CBR250RR MC22
- 1 x BPLT-0038 - Turn Signal Set, Black/Blue, RC30 Style
- 1 x CK-Suzuki-RGV250-89-96 - Carb Service Kit, 8 pieces, Suzuki RGV250 (VJ21/VJ22)
- 1 x TELC-0009 - Wiring Boot, 7-22
- 1 x BPFG-0004Rothmans - Fuel Tank, GRP, NSR250, MC21, Painted Rothmans
- 1 x TYSR-0101-39T - Sprocket, Rear 39T, #520, Stock, Aluminium, (Gold), CBR250R/CBR300R
- 1 x BPLT-0026 - Mini LED turn signal lamp kit, Universal, Front Fairing.
- 1 x TYLY-0298 - Set, 2T Blank Plug and Blank Plug Holder
- 1 x KSWB-0801 - Spiral Wrapping Band, Pink *
- 1 x BPAC-0016 - Rubber Shield, Head Light, Pair, NC30, NC29, MC22
- 1 x BPCC-0022 - Carbon Cover, Speedo Surround 92mm.
- 1 x NHPS-0008 - Waterpump Rebuild Kit MC21/28, Assy.
- 1 x TYTO-0006 - Engine Stand, NSR250
- 1 x TYLY-2110 - Front Fork Preload Adjuster 14mm., Blue
- 1 x TPER-0065 - Wheel, Front, Spacer Kit. 05-06 CBR600RR fork conversion
- 2 x BPCH-0002 - Rear Hugger, Carbon, NSR250 MC21, Assy.
- 1 x TPER-0006 - Wheel, Front, Spacer Kit, (2007-onwards) CBR600RR fork conversion
- 1 x BPAC-1001 - TYGA Brake Reservoir Kit
- 1 x TPER-0022 - Flange, Silencer Mounting, Mild Steel
- 1 x VHM-NSR250MC21/28 - VHM Cylinder Head Set NSR250 MC21/28
- 1 x 83641-MR8-000 - Bolt, Bodywork
- 1 x TPER-0017 - Steering Stopper, NC30
- 1 x BPCX-7417 - Chain Guard, Carbon, NC30/NC35
- 1 x 2323CD59mm - Ring Set, Wiseco, 300 Piston Big Bore
- 1 x BPSY-0326 - Stay, Tail Light, NC30
- 1 x 52170-KV3-830 - Chain Slider, MC 21
- 1 x TPER-0014-1 - Pro-Arm Wheel Spacer, 1mm
- 1 x BPCC-9017 - Front Brake Reservoir Stay, NC30, Carbon
- 1 x VHM-NSR300 - VHM Cylinder Head NSR300
- 1 x TYTS-0001 - Tool Set, Shaft Holder, 5~22mm
- 1 x TPER-0037 - TYGA 300cc exhaust manifold set
- 1 x TPER-0014-3 - Pro-Arm Wheel Spacer, 3mm
- 1 x TYLY-1222 - Tank Filler Cap, Keyless, Racing Type, Honda, Type 4
- 1 x NHPS-0001B - Top End Rebuild Kit MC21/28, Cyl B Assy.
- 1 x EXMN-0300 - Collar, Manifold, Stainless, NSR250
- 1 x 91016-KT8-005 - Bearing Headstock Lower
- 1 x SCRE-0076 - Screen Clear, FZR400, Kit.
- 1 x LEVC-9011 - Clutch Lever CNC Black, NSR250, CBR250RR
- 1 x SCRE-0088 - Screen Clear, MC19, Kit.
- 1 x SCRE-0057 - Screen, Tint, Stock Shape, CBR250RR MC22, Kit.
- 1 x SCRE-0047 - Screen Tint, TYGA EYES/NSR150SP, Kit.
- 1 x BPSY-0319B - Stay B, VFR750F, 3rd Gen, 90-93
- 1 x STAA-0002B - Racing Step Kit, MC28
- 1 x BPFG-0001 - Fuel Tank, GRP, NSR250 MC28, Unpainted
- 1 x STAA-0014 - Racing Step Kit, VTR1000 SP2
- 1 x BPLT-0030 - Slim Style LED turn signal lamp kit, Universal, Front Fairing.
- 1 x BPFX-0018 - Air Ducts, Pair, GRP, NC35
- 1 x SCRE-1163 - Screen Clear, TYGA Style KTM Fairing, Tall Version, Kit.
- 1 x TWDS-0005Black - Tyre Warmers, Lightweight Sports, Black
- 1 x BPCX-5202 - Sprocket Cover, Carbon, NSR150SP
- 1 x EXSL-0109(p) - Silencer, Stainless, Round, WSS300, No fittings, KTM RC390 2022-2024
- 1 x EXSL-0109 - Silencer, Stainless, Round, WSS300, Assy, KTM RC390 2022-2024
- 1 x TMER-0050 - TYGA Bike Dust Cover, Black/Green
$63,097.32US
Currencies