The TYGA Full Race System has been designed with maximum power mind. This system is a necessity if you need to squeeze every drop of horse power from the machine.
Manufactured from TIG welded stainless steel sections throughout, with all joints secured by springs, for that 'factory' look and feel. The system fits both the NC30 and NC35. Most systems are not designed to be used with a side stand on the NC30, but the TYGA system can be used with a sidestand on both the NC30 and NC35.
For unsurpassed looks, sound and performance, this system can be used with any of our 400 system exhaust silencers (pictured below) or any other compatible spring mounted 2" bore silencer.
TYGA provide the following compatible silencers which can either be ordered separately or together as a set.
If you need further reason to purchase this product, this exhaust is considerably lighter than the stock system. Weighing only half the weight of the stock system makes for a weight saving of 4.2 kg. (see table below)
TYGA
Honda
Difference
Front down pipes
1000
1500
500
Rear Pipes
2172
3500
1328
Rear Manifold
0
858
858
Heat shield
0
298
298
Pipes Total
3172
6256
2984
Silencer
1497
2704
1207
Total
4669
8860
4191
Jetting Advice NC30:
With the TYGA exhaust, but with standard air box, you would be looking at main jets around Fr.118/Rr.120, or possibly Fr.120/Rr.122
If you feel some lack of torque in the midrange, but with a strong top end then try to lift the needles with a 0.5mm washer.
Keep the slow jets as standard or the low speed running will be a problem.
This system may not comply to specific country noise emission regulations and is not homologated for street use.
Tank Protector, Universal, H2C has been added to your Cart
Section, Collector, Final, Stainless, NC30/35 Final Collector and combined tailpipe. Used on: EXPS-0002 Set, Pipe, Full Race System NC30-35 (No Silencer)…
Section, Collector, Intermediate, Front, Stainless, NC30/35
Intermediate (primary) collector for front headers. Used on:
EXPS-0002 Set, Pipe, Full Race System NC30-35 (No Silencer)
EXPS-0011 Set,…
Section, Collector, Intermediate, Rear, Stainless, NC30/35 Intermediate (primary) collector for rear headers. Used on: EXPS-0002 Set, Pipe, Full Race System…
Section, Header, Front Left, Stainless, NC30/35 Header, Front Left. Used on: EXPS-0002 Set, Pipe, Full Race System NC30-35 (No Silencer) EXPS-0011 Set,…
Section, Header, Front Right, Stainless, NC30/35 Header, Front Right. Used on: EXPS-0002 Set, Pipe, Full Race System NC30-35 (No Silencer) EXPS-0011 Set,…
Section, Header, Rear Right, Stainless, NC30/35 Header, Rear Right. Used on: EXPS-0002 Set, Pipe, Full Race System NC30-35 (No Silencer) EXPS-0011 Set,…
Clamp, Manifold, NC30/35
Manifold Clamp. Fitted to rear cylinder port. For use with:
EXPS-0002 Set, Pipe, Full Race System NC30-35 (No Silencer)
EXPS-0011 Set, Pipe,…
Clamp, Silencer, Twin Stack, Street, Aluminium/Stainless, Assy. This four stroke silencer clamp is specifically designed TYGA Twin Stack NC30/35 Exhaust…