Due to popular demand, we have developed a full range of bodywork for the CBR400RR. This takes styling cues from the RC211V and totally modernises the look of the popular sportsbike. The parts can be bought as kits, (full fairing kit and seat cowling kit) and we also offer a hugger, and other small carbon components as well as front fenders to complete the transformation bringing the bike right up to date.
The bodywork is made from high quality GRP using cross weave mat with an excellent finish on both outside and inside. Where stated, some products use carbon fiber. We use epoxy resins for superior strength, while at the same time allowing for light and flexible panels. The bodywork is supplied predrilled for easy fitment and uses either the original CBR400RR parts or fasteners supplied in the kit for easy fitment.
Note: While every effort has been made to design and manufacture our products to make fitment as easy as possible, we advise that panels are fitted to the motorcycle prior to painting. These parts are handmade, and as such, there may be slight differences in dimensions. Also, if your motorcycle has been in an accident, make sure that all stays and mounting brackets are in the correct alignment and have not been damaged in an accident. Finally, we advise when fitting fairings to loosen off all mounting stays and brackets to allow for the best fitment position of the fairings.
Kit, Fairing set, Race, NC29 RC211V This set of bodywork comprises of the parts shown below which are also available…
Kit, Fairing Set, Street NC29 RC211V This set of bodywork comprises of the parts below which are also available…
Kit, Seat Set, Street, NC29 RC211V This set of bodywork comprises the parts shown below which are also available…
Carbon Covers, Set, Instrument Surrounds Theses covers fit snuggly over the original plastic Honda gauge covers and adds a sporty…
Carbon Cover, Rev Counter, Surround 91.5mm This cover fits snuggly over the original plastic Honda gauge cover and…
Carbon Cover, Speedo Surround 92mm This cover fits snuggly over the original plastic Honda gauge cover and adds…
Carbon Cover, Temp Gauge, Surround 55.5mm This cover fits snuggly over the original plastic Honda gauge cover and…
Front Fender, GRP, NC23,NC29, NC30, Stock Shape Top quality GRP reproduction of the stock OEM Honda front fender (weight…
Front Fender, Carbon, NC23,NC29, NC30, Stock Shape Real Carbon fibre reproduction of the stock OEM Honda front fender. Finished in high…
Front Fender, Carbon, NC29-30 2006 RC211V Style Attaches to the original mounting points and can be used with…
Front Fender, GRP, NC29/30, 2006 RC211V style Attaches to the original mounting points and can be used with all Tyga…
Front Fender, Carbon, Sports Universal This carbon front fender is suitable for many models and is fixed to the front forks via…
Air Duct, Carbon, RC211V Style, Assy. This airduct is a direct replacement for the fiberglass version which is supplied with…
Rear Fender Special (with Carbon), NC29, Assy. Rear Fender/luggage compartment specially designed to be used with our RC211V style seat…
Rear Hugger, Carbon, NC29 CBR400RR Rear Hugger, RC211V style A very stylish replacement hugger for the NC29, following the RC211V…
Air Duct, GRP, RC211V Style, Assy. Please note this product is included when you order any of our RC211V style…
Lower Cowling, GRP, RC211V Style, NC29, Assy. …
Seat Cowling, Street, GRP, NC29 CBR400RR RC211V Style, Assy. This is part for body set BPFS-0021 and only includes the replacement…
Upper Cowling Front, Race, GRP, RC211V Style, Assy. This is a replacement part for bodywork set BPFS-0012, BPFS-0014 and BPFS-0020…
Upper Cowling Left, GRP, NC29 RC211V Style, Assy. This is a replacement part for bodywork set BPFS-0019…
Upper Cowling RC211V style (Tyga Eyes III front), Assy. This products is a replacement part for bodywork sets BPFS-0019, BPFS-0032…
Upper Cowling Right, GRP, NC29, RC211V Style, Assy. This is a replacement part for bodywork set BPFS-0019…
Replacement meter stay extension nylon shaft. Suitable for the following models: BPFS-0012 BPFS-0019 BPFS-0032 BPFS-0033…
Vibe Rubber. Suitable for the following models: BPFS-0012 BPFS-0013 BPFS-0014 BPFS-0019 BPFS-0020 BPFS-0032 BPFS-0033 BPFS-0090 BPFS-0092 BPFS-0115 BPFS-0119See table below…
Headlight Bulb, Halogen 12V 35/35W Halogen Reverse type bulb. This is a top quality halogen replacement bulb for use…
Headlight/Turn Signal Assembly, Tyga Eyes III, Assy. This sleek integrated uses Osram 35/35W bulbs and modern reflector and refractor…
Bolt, Bodywork Mounting, non-collared, M6, CBR Bodywork mounting bolt, CBR125R, CBR150R, CBR250R, CBR300R. M6 X10 mm. No collar. OEM Honda…
Bolt, Bodywork Mounting, collared, M6, CBR Bodywork mounting bolt with collar, CBR125R, CBR150R, CBR250R. CBR300R, M6 X14 mm. Has…
Screen Fastener Set, Assy. This set of TYGA screen fasteners consists of 10 X black zinc coated M4 bolts, and…
0 items