Stock List, All Models
Silencer, Stainless, Round, Four Stroke, 44.5mm., No Fittings
Silencer, Stainless, Round, Four Stroke, 44.5mm., No FittingsThe Dimensions of this silencer are as follows:I.D. 44.5mm (slip-on section) O.D. 4…
- Model
- EXSL-0045(p)
- Quantity
- 100+
Silencer, Stainless Moto Maggot, Left, KTM RC390 Serpent, No fittings
Silencer, Stainless Moto Maggot, Left, KTM RC390 Serpent, No fittingsMaggot silencer with 35 mm. inside diameter. Does not…
- Model
- EXSL-8113L(p)
- Quantity
- 100+
Silencer, Stainless Moto Maggot, Right, KTM RC390 Serpent, No fittings
Silencer, Stainless Moto Maggot, Right, KTM RC390 Serpent, No fittingsMaggot silencer with 35 mm. inside diameter. Does not…
- Model
- EXSL-8113R(p)
- Quantity
- 100+
Silencer, Stainless, Oval, Stainless, 2 inch, No Fittings
Silencer, Stainless, Oval, Stainless, 2", No FittingsSame as EXSL-0017 but without any fittings.Please add in the comments box…
- Model
- EXSL-0017(p)
- Quantity
- 100+
Silencer, Stainless Moto Maggot, 43 mm, Ninja 400, No Fittings
Silencer, Stainless Moto Maggot, 43 mm, Ninja 400, No FittingsMaggot silencer with 43 mm, inside diameter.Please note…
- Model
- EXSL-0071(p)
- Quantity
- 100+
n.jpg "Silencer, Stainless Moto Maggot, 35 mm., MSX125 Grom, No fittings")
Silencer, Stainless Moto Maggot, 35 mm., MSX125 Grom, No fittings
Silencer, Stainless Moto Maggot, 35 mm., MSX125, No fittingsMaggot silencer with 35 mm. inside diameter. Does not include pipe…
- Model
- EXSL-8013(p)
- Quantity
- 100+
Silencer, Stainless Moto Maggot, 50.8 mm, No fittings
Silencer, Stainless Moto Maggot, 50.8 mm, No fittingsMaggot silencer with 50.8 mm. inside diameter. Same as EXSL-3013 but without…
- Model
- EXSL-3013(p)
- Quantity
- 100+
Silencer, Stainless Motor Maggot, 50.8 mm., ER6, No fittings
Silencer, Stainless Motor Maggot, 50.8 mm., ER6, No fittingsMaggot silencer with 50.8 mm. inside diameter. Same as EXSL-2013 but without…
- Model
- EXSL-2013(p)
- Quantity
- 100+
01tn.JPG "Silencer, Stainless, Round, Four Stroke, 50.8mm. bore, Sleeve, 4 inch X 430mm (No fittings)")
Silencer, Stainless, Round, Four Stroke, 50.8mm. bore, Sleeve, 4 inch X 430mm (No fittings)
Silencer, Stainless, Round, Four Stroke, 50.8mm. bore, Sleeve, 4 inch X 430mm (No fittings) Replacement silencer and…
- Model
- EXSL-0117(p)
- Quantity
- 16
Silencer, Stainless Moto Maggot, 43 mm., Ninja 250/300R, No fittings
Silencer, Stainless Moto Maggot, 43 mm., Ninja 250/300R, No fittingsMaggot silencer with 43 mm. inside diameter. Only includes Maggot silencer.…
- Model
- EXSL-9013(p)
- Quantity
- 100+
Silencer, Stainless Moto Maggot, 43 mm., Ninja 250R, No fittings
Silencer, Stainless Moto Maggot, 43 mm., Ninja 250R, No fittingsSame as EXSL-4013 but without any fittings. Only includes Maggot silencer.…
- Model
- EXSL-4013(p)
- Quantity
- 100+
Silencer, Stainless Moto Maggot, 43 mm, Ninja 400, Assy
Silencer, Stainless Moto Maggot, 43 mm, Ninja 400, Assy Maggot silencer with 43 mm. inside diameter, Complete with springs. …
- Model
- EXSL-0071
- Quantity
- 100+
Silencer, Stainless Moto Maggot, 44.5 mm., Ninja 300R, No fittings
Silencer, Stainless Moto Maggot, 44.5 mm., Ninja 300R, No fittingsMaggot silencer with 44.5 mm. inside diameter. Only includes Maggot silencer.…
- Model
- EXSL-9113(p)
- Quantity
- 100+
Silencer, Stainless Moto Maggot, 64 mm., Mega Monster, No fittings
Silencer, Stainless Moto Maggot, 64 mm., Mega Monster, No fittingsMaggot silencer with 64 mm. inside inlet diameter. No…
- Model
- EXSL-0053(p)
- Quantity
- 100+
Silencer, Stainless Moto Maggot, 44.5 mm., Ninja 300R, Assy.
Silencer, Stainless Moto Maggot, 44.5 mm., Ninja 300R, Assy. Same as EXSL-9113(p) but with mounting springs and spring hooks to weld…
- Model
- EXSL-9113
- Quantity
- 100+
Silencer, Stainless Moto Maggot, 35 mm., Left, Grom, No fittings
Silencer, Stainless Moto Maggot, 35 mm., Left, Grom, No fittingsPlease note that decibel killer model EXDK-0002 is compatible…
- Model
- EXSL-8313L(p)
- Quantity
- 100+
p)01tn.JPG "Silencer, Stainless Moto Maggot, 35 mm., Right, Grom, No fittings")
Silencer, Stainless Moto Maggot, 35 mm., Right, Grom, No fittings
Silencer, Stainless Moto Maggot, 35 mm., Right, Grom, No fittingsPlease note that decibel killer model EXDK-0002 is compatible…
- Model
- EXSL-8313R(p)
- Quantity
- 100+
Silencer, Stainless, Round, 2 Inch x 380 mm, Assy
Silencer, Stainless, Round, 2" x 380 mm., Assy
This silencer has polished stainless steel endcaps and a…
- Model
- EXSL-0079
- Quantity
- 3
Section, Header, Stainless, KTM RC390
Section, Header, Stainless, KTM RC390 Section, Header, Stainless, KTM RC390 Header exhaust, designed for unimpeded flow. Unlike the stock KTM…
- Model
- EXPT-0003
- Quantity
- 5
Silencer, Stainless, Oval, Four Stroke, Stainless, Assy.
Silencer, Stainless, Oval, Four Stroke, Stainless, Assy. Oval four stroke silencer. A tasty addition for your NC30/35 and VFR750F…
- Model
- EXSL-0017
- Quantity
- 100+
Silencer, Stainless Moto Maggot, 50.8 mm, VFR750F Gen 4, 94-97, Assy
Silencer, Stainless Moto Maggot, 50.8 mm, VFR750F Gen 4, '94-'97, Assy Maggot silencer with 50.8 mm. inside diameter, Assy…
- Model
- EXSL-0082
- Quantity
- 6
Section, Header, Stainless, WSS300 Race System, KTM RC390/390 Duke
Section, Header, Stainless, WSS300 Race System, KTM RC390/390 Duke Replacement Header section for Full Systems EXPS-0111, EXPS-0112, EXPS-0113, EXPS-0141,…
- Model
- EXPT-0077
- Quantity
- 8
Silencer, Carbon, Round, Twin Stack, No Fittings
Silencer, Carbon, Round, Twin Stack, No FittingsReplacement Silencer for TYGA Twin Stack System EXPS-0003 ( 2 silencers are…
- Model
- EXSL-0026(p)
- Quantity
- 100+
Silencer, Aluminium/Carbon End Cap, Round, 43 mm. x 380 mm., No Fittings
Silencer, Aluminium/Carbon End Cap, Round, 43 mm. x 380 mm., No FittingsPlease add in the comments box provided if the silencer…
- Model
- EXSL-0133(p)
- Quantity
- 100+
Replacement Silencer, Slip On, Carbon, Oval/Carbon End Cap, Yamaha R25/R3
Replacement Silencer, Slip On, Carbon, Oval/Carbon End Cap, Yamaha R25/R3Hand assembled with carbon sleeve. Precision made CNC machined…
- Model
- EXSL-0056
- Quantity
- 100+
Silencer, Aluminium/Carbon End Cap, Round, 2 Inch x 380 mm., No Fittings
Silencer, Aluminium/Carbon End Cap,, Round, 2" x 380 mm., No FittingsSame as EXSL-0140 but without any fittings. Silencer,…
- Model
- EXSL-0140(p)
- Quantity
- 100+
Silencer, Stainless/Carbon End Cap, Round, 2 Inch x 380 mm., No Fittings
Silencer, Stainless/Carbon End Cap,, Round, 2" x 380 mm., No FittingsSame as EXSL-0146 but without any fittings.*…
- Model
- EXSL-0146(p)
- Quantity
- 100+
Replacement Silencer, Slip-On, Stainless, Oval/Carbon End Cap, Yamaha R25/R3
Replacement Silencer, Slip-On, Stainless, Oval/Carbon End Cap, Yamaha R25/R3Hand assembled with brushed stainless steel sleeve. Precision made CNC…
- Model
- EXSL-0052
- Quantity
- 100+
01tn.JPG "Silencer, Stainless, Oval, Carbon End Cap, Ninja 400, no fittings")
Silencer, Stainless, Oval, Carbon End Cap, Ninja 400, no fittings
Silencer, Stainless, Oval, Carbon End Cap, Ninja 400, no fittingsSilencer with 43 mm. inside diameter. Please note this…
- Model
- EXSL-0072(p)
- Quantity
- 100+
Silencer, Stainless, Oval/Carbon End Cap, Spring Mount Left, GROM, No Fittings
Silencer, Stainless, Oval/Carbon End Cap, Spring Mount Left, GROM, No Fittings* Please note that decibel killer model EXDK-0002…
- Model
- EXSL-0094(p)
- Quantity
- 100+
Silencer, Stainless, Oval/Carbon End Cap, Spring Mount, MSX125 Grom, No Fittings
Silencer, Stainless, Oval/Carbon End Cap, Spring Mount, MSX125 Grom, No Fittings* Please note that decibel killer model EXDK-0002…
- Model
- EXSL-1142(p)
- Quantity
- 100+
Silencer, Stainless, Oval, Carbon End Cap, Ninja 400, Assy
Silencer, Stainless, Oval, Carbon End Cap, Ninja 400, Assy Silencer with 43 mm. inside diameter. Please note this is…
- Model
- EXSL-0072
- Quantity
- 100+
Silencer, Stainless, Oval/Carbon End Cap, Underbelly Short, MSX125 Grom
Silencer, Stainless, Oval/Carbon End Cap, Underbelly Short, MSX125 Grom, no fittingsSee also EXSL-0058 silencer, long type.* Please…
- Model
- EXSL-0059(p)
- Quantity
- 100+
Silencer, Aluminium/Carbon End Cap, Round, 2 Inch x 380 mm., Assy.
Silencer, Aluminium/Carbon End Cap, Round, 2" x 380 mm., Assy. This silencer has a tough anodized aluminium tube and…
- Model
- EXSL-0140
- Quantity
- 100+
Silencer, Stainless, Oval/Carbon End Cap, Spring Mount, Kawa Z125, No Fittings
Silencer, Stainless, Oval/Carbon End Cap, Spring Mount, Kawa Z125, No Fittings* Please note that decibel killer model EXDK-0002…
- Model
- EXSL-0060(p)
- Quantity
- 100+
Silencer, Stainless/Carbon End Cap, Round, 2 Inch x 380 mm., Assy.
Silencer, Stainless/Carbon End Cap, Round, 2" x 380 mm., Assy. This silencer has polished stainless steel endcaps and a…
- Model
- EXSL-0146
- Quantity
- 100+
Silencer, Stainless, Oval/Carbon End Cap, Underbelly Long, MSX125 Grom
Silencer, Stainless, Oval/Carbon End Cap, Underbelly Long, MSX125 Grom, no fittingsSee also similar product EXSL-0059 (silencer, short type).…
- Model
- EXSL-0058(p)
- Quantity
- 100+
Silencer, Left, Stainless, Oval/Carbon End Cap, Spring Mount, KTM RC390 Serpent, No Fittings
Silencer, Left, Stainless, Oval/Carbon End Cap, Spring Mount, KTM RC390 Serpent, No Fittings* Please note that decibel killer…
- Model
- EXSL-0057L
- Quantity
- 100+
Silencer, Right, Stainless, Oval/Carbon End Cap, Spring Mount, KTM RC390 Serpent, No Fittings
Silencer, Right, Stainless, Oval/Carbon End Cap, Spring Mount, KTM RC390 Serpent, No Fittings* Please note that decibel killer…
- Model
- EXSL-0057R
- Quantity
- 100+
Silencer, Carbon, Round, 43 mm., No Fittings
Silencer, Carbon, Round, 43 mm., No FittingsSame as EXSL-0032 but without any fittings.Please add in the comments box provided if the…
- Model
- EXSL-0032(p)
- Quantity
- 100+
Silencer, Stainless, Round/Carbon End cap Slip-On, MC22, CBR250RR, No Fittings
Silencer, Stainless, Round/Carbon End cap Slip-On, MC22, CBR250RR, No FittingsSame as EXSL-1116 but without any fittings. Fits MC22 …
- Model
- EXSL-1116(p)
- Quantity
- 100+
Replacement Silencer, Stainless/Carbon End Cap
Replacement Silencer, Stainless/Carbon End CapUsed with EXPS-0072 and EXPS-0144…
- Model
- EXSL-0114
- Quantity
- 100+
Silencer, Carbon, Round, Four Stroke, 2 inch, No Fittings
Silencer, Carbon, Round, Four Stroke, 2", No FittingsSame as EXSL-0012 but without any fittings.…
- Model
- EXSL-0012(p)
- Quantity
- 100+
01tn.JPG "Silencer, Carbon, Round, Four Stroke, 50.8mm. bore, Sleeve, 4 inch X 430mm (No fittings)")
Silencer, Carbon, Round, Four Stroke, 50.8mm. bore, Sleeve, 4 inch X 430mm (No fittings)
Silencer, Carbon, Round, Four Stroke, 50.8mm. bore, Sleeve, 4 inch X 430mm (No fittings) Replacement silencer and…
- Model
- EXSL-0120(p)
- Quantity
- 17
01tn.JPG "Silencer, Carbon/Kevlar, Round, Four Stroke, 50.8mm. bore, Sleeve, 4 inch X 430mm (No fittings)")
Silencer, Carbon/Kevlar, Round, Four Stroke, 50.8mm. bore, Sleeve, 4 inch X 430mm (No fittings)
Silencer, Carbon/Kevlar, Round, Four Stroke, 50.8mm. bore, Sleeve, 4 inch X 430mm (No fittings) Replacement silencer and…
- Model
- EXSL-0119(p)
- Quantity
- 18
Exhaust Chamber, Right, GP Type, Stainless Steel, Aprilia RS-250
Exhaust Chamber, Right, GP Type, Stainless Steel, Aprilia RS-250Bare replacement right side chamber for EXCS-0008…
- Model
- EXCB-0008R
- Quantity
- 4
Exhaust Chamber, Right, GP Type, Stainless Steel, RGV250, VJ22
Exhaust Chamber, Right, GP Type, Stainless Steel, RGV250, VJ22Bare replacement right side chamber for chamber set EXCS-0010…
- Model
- EXCB-0010R
- Quantity
- 4
Exhaust Chamber, Right, Side By Side Type, Stainless Steel, Aprilia RS-250
Exhaust Chamber, Right, Side By Side Type, Stainless Steel, Aprilia RS-250Bare replacement right side chamber for EXCS-0007…
- Model
- EXCB-0007R
- Quantity
- 13
Exhaust Chamber, Right, Side By Side Type, Stainless Steel, RGV250 VJ22
Exhaust Chamber, Right, Side By Side Type, Stainless Steel, RGV250 VJ22 Bare replacement right side chamber for EXCS-0009 …
- Model
- EXCB-0009R
- Quantity
- 17
Silencer, Carbon, Oval/Carbon End Cap, Spring Mount Left, GROM, No Fittings
Silencer, Carbon, Oval/Carbon End Cap, Spring Mount Left, GROM, No Fittings …
- Model
- EXSL-0093(p)
- Quantity
- 100+
Silencer, Carbon, Oval/Carbon End Cap, Spring Mount, MSX125 Grom, No Fittings
Silencer, Carbon, Oval/Carbon End Cap, Spring Mount, MSX125 Grom, No Fittings …
- Model
- EXSL-0042(p)
- Quantity
- 100+
Silencer, Carbon, Round, 2 Inch x 380mm, Assy
Silencer, Carbon, Round, 2" x 380 mm., Assy
This silencer has polished stainless steel endcaps and a…
- Model
- EXSL-0080
- Quantity
- 7
Exhaust Chamber, No Fittings, Stainless Steel, KRR150ZX
Exhaust Chamber, No Fittings, Stainless Steel, KRR150ZXBare replacement chamber for EXCS-0030…
- Model
- EXCB-0030
- Quantity
- 14
Exhaust Chamber, Stainless Steel, KRR150ZX
Exhaust Chamber, Stainless Steel, KRR150ZX …
- Model
- EXCB-0035
- Quantity
- 29
Silencer, Stainless, Oval/Carbon End Cap, 35mm., CNC/Spring Mount, No Fittings
Silencer, Stainless, Oval/Carbon End Cap, 35 mm, CNC/Spring Mount, No Fittings.The Dimensions of this silencer are as follows:I.D.…
- Model
- EXSL-0049(p)
- Quantity
- 100+
Exhaust Chamber, Stainless Steel, Cagiva Mito 125
Exhaust Chamber, Stainless Steel, Cagiva Mito 125 …
- Model
- EXCB-0037
- Quantity
- 7
Silencer, Carbon, Round, Slip On, CBR250RR MC22, No Fittings
Silencer, Carbon, Round, Slip On, CBR250RR MC22, No FittingsSame as EXSL-0016 but without any fittings.This product is for…
- Model
- EXSL-0016(p)
- Quantity
- 100+
Silencer, Carbon, Round, Slip On, No Fittings
Silencer, Carbon, Round, Slip On, No FittingsNo fittings. …
- Model
- EXSL-0022/23(p)
- Quantity
- 100+
Exhaust Chamber, No Fittings, Stainless Steel, NSR150SP
Exhaust Chamber, No Fittings, Stainless Steel, NSR150SPBare replacement chamber for EXCS-0024…
- Model
- EXCB-0024
- Quantity
- 21
Exhaust Chamber, Left, GP Type, Stainless Steel, RGV250, VJ22
Exhaust Chamber, Left, GP Type, Stainless Steel, RGV250, VJ22Bare replacement left side chamber for chamber set EXCS-0010…
- Model
- EXCB-0010L
- Quantity
- 10
Exhaust Chamber, Right, Side By Side Type, Stainless Steel, RGV250 VJ21
Exhaust Chamber, Right, Side By Side Type, Stainless Steel, RGV250 VJ21Bare replacement right side chamber for EXCS-0031 …
- Model
- EXCB-0031R
- Quantity
- 8
Exhaust Chamber, Left, Crossover Type, Mirror, Yamaha RD350LC
Exhaust Chamber, Left, Crossover Type, 'Mirror', Yamaha RD350LCThis is the bare left side replacement chamber for EXCS-0044…
- Model
- EXCB-0044L
- Quantity
- 8
Exhaust Chamber, Right, Crossover Type, Mirror, Yamaha RD350LC
Exhaust Chamber, Right, Crossover Type, 'Mirror', Yamaha RD350LCThis is the bare right side replacement chamber for EXCS-0044…
- Model
- EXCB-0044R
- Quantity
- 9
Exhaust Chamber, Left, Side By Side Type, Stainless Steel, RGV250 VJ21
Exhaust Chamber, Left, Side By Side Type, Stainless Steel, RGV250 VJ21Bare replacement left side chamber for EXCS-0031 …
- Model
- EXCB-0031L
- Quantity
- 9
Exhaust Chamber, Yamaha RX-Z 135
Exhaust Chamber, Yamaha RX-Z 135 This is the bare replacement chamber for EXCS-0050…
- Model
- EXCB-0050
- Quantity
- 21
Exhaust Chamber, Left, GP Type, Stainless Steel, Aprilia RS-250
Exhaust Chamber, Left, GP Type, Stainless Steel, Aprilia RS-250Bare replacement left side chamber for EXCS-0008…
- Model
- EXCB-0008L
- Quantity
- 9
Exhaust Chamber, Right, Stainless Steel, MC21
Exhaust Chamber, Right, Stainless Steel, MC21This is the bare right side replacement chamber in stainless steel for EXCS-0005A suitable for EXCS-0005A…
- Model
- EXCB-0005RA
- Quantity
- 5
Exhaust Chamber, Right, Stainless Steel, MC28
Exhaust Chamber, Right, Stainless Steel, MC28This is the bare right side replacement chamber for EXCS-0005B suitable for EXCS-0005B and EXCS-0006B…
- Model
- EXCB-0005RB
- Quantity
- 7
Exhaust Chamber, Stainless Steel, Aprilia RS-125
Exhaust Chamber, Stainless Steel, Aprilia RS-125Bare chamber for EXCS-0019…
- Model
- EXCB-0019
- Quantity
- 1
Exhaust Chamber, Left, Side By Side Type, Stainless Steel, Aprilia RS-250
Exhaust Chamber, Left, Side By Side Type, Stainless Steel, Aprilia RS-250Bare replacement left side chamber for EXCS-0007…
- Model
- EXCB-0007L
- Quantity
- 16
Exhaust Chamber, Left, Side By Side Type, Stainless Steel, RGV250 VJ22
Exhaust Chamber, Left, Side By Side Type, Stainless Steel, RGV250 VJ22Bare replacement left side chamber for EXCS-0009…
- Model
- EXCB-0009L
- Quantity
- 11
Silencer, Stainless, Round, WSS300, Assy, KTM RC390 2022-2024
Silencer, Stainless, Round, WSS300, Assy, KTM RC390 2022-2023Replacement Silencer for WSS300 Race System EXPS-0160The 'slip-on' mount is…
- Model
- EXSL-0109
- Quantity
- 9
Exhaust Chamber, No Fittings, Stainless Steel, KRR150
Exhaust Chamber, No Fittings, Stainless Steel, KRR150Bare replacement chamber for EXCS-0025…
- Model
- EXCB-0025
- Quantity
- 13
Silencer, Round, Carbon/Carbon End Cap, Round, 2 Inch x 380mm, No Fittings
Silencer, Round, Carbon/Carbon End Cap, Round, 2"x 380mm, No FittingsSame as EXSL-0081 but without any fittings.* Please…
- Model
- EXSL-0081(p)
- Quantity
- 8
Exhaust Chamber, Left, Yamaha TZR250 (3MA)
Exhaust Chamber, Left, Yamaha TZR250 (3MA)This is the bare left side replacement chamber for EXCS-0051…
- Model
- EXCB-0051L
- Quantity
- 13
Exhaust Chamber, Right, Yamaha TZR250 (3MA)
Exhaust Chamber, Right, Yamaha TZR250 (3MA)This is the bare right side replacement chamber for EXCS-0051…
- Model
- EXCB-0051R
- Quantity
- 13
Exhaust Chamber, Left, 250V, MC28
Exhaust Chamber, Left, 250V, MC28This is the bare left side replacement chamber for EXCS-0047…
- Model
- EXCB-0047L
- Quantity
- 4
Exhaust Chamber, Left, Stainless Steel, NX5
Exhaust Chamber, Left, Stainless Steel, NX5Bare Replacement Exhaust Chamber, Left, Stainless Steel, NX5…
- Model
- EXCB-0039L
- Quantity
- 3
Silencer, Carbon, Oval/Carbon End Cap, 35mm., CNC/Spring Mount, No Fittings
Silencer, Carbon, Oval/Carbon End Cap, 35mm., CNC/Spring Mount, No FittingsThe Dimensions of this silencer are as follows:I.D. 35mm (slip-on section)…
- Model
- EXSL-0048(p)
- Quantity
- 100+
Silencer, Carbon, Round, Carbon End Cap, 43 mm. x 380mm, No Fittings
Silencer, Carbon, Round, Carbon End Cap, 43 mm. x 380mm, No FittingsSame as EXSL-0132 but without any fittings.…
- Model
- EXSL-0132(p)
- Quantity
- 100+
Silencer, Carbon, Round/Carbon End Cap, Round, Four Stroke, 2 inch, No Fittings
Silencer, Carbon, Round/Carbon End Cap, Round, Four Stroke, 2", No FittingsSame as EXSL-0112 but without any fittingsPlease add in the…
- Model
- EXSL-0112(p)
- Quantity
- 100+
Exhaust Chamber, Left, Side By Side Type, MC21/28
Exhaust Chamber, Left, Side By Side Type, MC21/28This is the bare left side replacement chamber for EXCS-0005…
- Model
- EXCB-0005L
- Quantity
- 6
Exhaust Chamber, Left, GP Type, Stainless, MC21
Exhaust Chamber, Left, GP Type, Stainless, MC21Bare replacement, left side chamber for EXCS-0006A…
- Model
- EXCB-0006LA
- Quantity
- 6
Exhaust Chamber, Left, GP Type, Stainless, MC28
Exhaust Chamber, Left, GP Type, Stainless, MC28Bare replacement, left side chamber for EXCS-0006B…
- Model
- EXCB-0006LB
- Quantity
- 7
Silencer, Round, Carbon/Carbon End Cap, 2 Inch x 380mm, Assy
Silencer, Round, Carbon/Carbon End Cap, 2" x 380mm, Assy
This silencer has a carbon endcap and a…
- Model
- EXSL-0081
- Quantity
- 8
Silencer, Carbon, Oval/Carbon End Cap, Spring Mount, No Fittings
Silencer, Carbon, Oval/Carbon End Cap, Spring Mount, No FittingsSame as EXSL-0035 but without any fittings. …
- Model
- EXSL-0035(p)
- Quantity
- 100+
Exhaust Chamber, Right, Stainless Steel, NX5
Exhaust Chamber, Right, Stainless Steel, NX5Bare Replacement Exhaust Chamber, Left, Stainless Steel, NX5…
- Model
- EXCB-0039R
- Quantity
- 5
Exhaust Chamber, Right, 250V, MC28
Exhaust Chamber, Right, 250V, MC28This is the bare right side replacement chamber for EXCS-0047 …
- Model
- EXCB-0047R
- Quantity
- 5
Silencer, Carbon, Oval/Carbon End Cap, 44.5mm., CNC/Spring Mount, No Fittings
Silencer, Carbon, Oval/Carbon End Cap, 44.5 mm, CNC/Spring Mount, No Fittings.The Dimensions of this silencer are as follows:I.D. 44.5mm (slip-on…
- Model
- EXSL-0044(p)
- Quantity
- 100+
Silencer, Carbon, Round/Carbon End Cap Slip On, RVF400 NC35, No Fittings
Silencer, Carbon, Round/Carbon End Cap Slip On, RVF400 NC35, No FittingsSame as EXSL-0122 but without any fittings. …
- Model
- EXSL-0122(p)
- Quantity
- 100+
Silencer, Carbon, Round/Carbon End cap Slip On, ZXR250, No Fittings
Silencer, Carbon, Round/Carbon End cap Slip On, ZXR250, No FittingsSame as EXSL-0123 but without any fittings. Fits both A and…
- Model
- EXSL-0123(p)
- Quantity
- 100+
Silencer, Carbon, Round/Carbon End cap Slip-On, MC22, CBR250RR, No Fittings
Silencer, Carbon, Round/Carbon End cap Slip-On, MC22, CBR250RR, No FittingsSame as EXSL-0116 but without any fittings. Fits MC22 …
- Model
- EXSL-0116(p)
- Quantity
- 100+
Silencer, Carbon, Oval/Carbon End Cap, 50.8mm., CNC/Spring Mount, No Fittings
Silencer, Carbon, Oval/Carbon End Cap, 50.8 X 380 mm., CNC/Spring Mount, No Fittings.The Dimensions of this silencer are…
- Model
- EXSL-0043(p)
- Quantity
- 100+
Section, Final, Stainless, WSS300 Race System, KTM RC390 2014-2021
Section, Final, Stainless, WSS300 Race System, KTM RC390 20147-2021Replacement part to be used with EXPS-0111 and EXPS-0112…
- Model
- EXPT-0078
- Quantity
- 13
Section, Final, Stainless, WSS300 Race System, KTM RC390 2022-2024
Section, Final, Stainless, WSS300 Race System, KTM RC390 2022-2023Replacement part to be used with EXPS-0160…
- Model
- EXPT-0090
- Quantity
- 3
Silencer, Carbon, Oval/Carbon End Cap, Slip On, RVF 400, No Fittings
Silencer, Carbon, Oval/Carbon End Cap, Slip On, RVF400, No FittingsSame as EXSL-0034 but without any fittings. …
- Model
- EXSL-0034(p)
- Quantity
- 100+
Exhaust Chamber, Left, Side By Side Type, Stainless Steel, MC18
Exhaust Chamber, Left, Side By Side Type, Stainless Steel, MC18 Bare replacement left side chamber for EXCS-0003…
- Model
- EXCB-0003L
- Quantity
- 13
Exhaust Chamber, Right, Side By Side Type, Stainless Steel, RGV250 VJ23
Exhaust Chamber, Right, Side By Side Type, Stainless Steel, RGV250 VJ23Bare replacement right side chamber for EXCS-0020 …
- Model
- EXCB-0020R
- Quantity
- 10
Exhaust Chamber, Left, Side By Side Type, Stainless Steel, RGV250 VJ23
Exhaust Chamber, Left, Side By Side Type, Stainless Steel, RGV250 VJ23Bare replacement left side chamber for EXCS-0020 …
- Model
- EXCB-0020L
- Quantity
- 11
Exhaust Chamber, Right, Side By Side Type, Stainless Steel, MC18
Exhaust Chamber, Right, Side By Side Type, Stainless Steel, MC18 Bare replacement right side chamber for EXCS-0003…
- Model
- EXCB-0003R
- Quantity
- 13
- 1 x TYLY-0146 - Ignition Switch Holder, CNC Silver, Suzuki RGV250 VJ22
- 1 x TYLY-0043 - Sprocket Holder, CNC, Black, MC21
- 2 x CKA-Yamaha-3TJ1 - Carb Service Kit A, 36 pieces, Yamaha FZR400RR 3TJ1
- 1 x 90116-KY2-700 - Bolt, Side Cowl
- 2 x EXMC-0001 - Clamp, Manifold, NSR150/250
- 1 x EXPS-0035 - Set, Pipe, Slip On, Ninja 250R/300R 2013-, Moto Maggot Silencer
- 1 x VHM-NSR80 - VHM Cylinder Head NSR80/MBX80
- 1 x BPFS-0211 - Kit, GRP, Complete Bodywork Set, NC35, Street Stock Shape, Twin Seat, Painted (RR) 1994
- 3 x SCRE-0050 - Screen Double Bubble tint, CBR400RR NC29, Kit.
- 2 x TPER-0001 - Hi Flo reeds, MC21/MC28, Assy.
- 3 x EXCS-0025 - Set, Exhaust Chamber, Stainless Steel, KRR150
- 5 x SCRE-0022 - Screen Tint, NSR250 MC28, Kit.
- 1 x TYTO-0023 - Clutch Holding Tool
- 5 x EXMN-0004 - Collar, Manifold, Aprilia RS-125
- 2 x EXPS-0103 - Set, Pipe, Race System, Monkey 125 (No Silencer)
- 2 x EXCB-0010R - Exhaust Chamber, Right, GP Type, Stainless Steel, RGV250, VJ22
- 2 x EXCB-0003L - Exhaust Chamber, Left, Side By Side Type, Stainless Steel, MC18
- 2 x EXSL-0050 - Silencer, Race, Stainless Steel with Carbon End Cap,YZ250 2005-2024
- 5 x EXCS-0026 - Set, Exhaust Chamber, Clearcoated Mild Steel, KRR150
- 1 x EXPS-0031 - Set, Pipe, Slip On, Round Aluminium Silencer, Ninja 250
- 2 x INAL-0500 - Insert Aluminium EM5 (10 pieces)
- 2 x EXTC-0008 - Tube, Carbon, Oval, 76mm x 99.5mm x 330mm
- 3 x TYBP-7428 - Fitting Kit for Lower Cowl BPFL-7428 and BPCL-7428
- 2 x 99101-MAZ-1150 - Main Jet, KEIHIN, (99101), #115
- 4 x SCRE-0169 - Screen Clear, TYGA style, Ninja 400, Kit
- 3 x EXCS-0037 - Set, Exhaust Chamber, Stainless Steel, Cagiva Mito 125
- 4 x 82049-N99-000 - Genuine HRC Sticker Set
- 2 x LOCK-0001 - Quick Lock Cap and O-ring
- 2 x TMER-0047 - TYGA Bike Dust Cover, Blue
- 2 x TMER-0131 - TYGA Bike Dust Cover, Lime Green/Black, NINJA
- 1 x TMER-0122 - TYGA Bike Dust Cover, Black/Red Honda, CBR250RR (street)
- 2 x SCRE-0180 - Screen, Tint, VFR750R RC30, Kit
- 1 x BPFS-250VREPSOL - Kit, GRP, Complete bodywork set with Fuel Tank and Front Fender, painted Repsol, MC21, MC28 NSR250V
- 1 x EXPT-8151 - Section, Secondary B, R.H Exit, VFR750F, 3rd Gen, 90-93
- 1 x TWHL-0011 - Forged Aluminium Racing wheel set, 5 spoke, PVM, Front 3.50 x 17, Rear 5.0 x 17, White
- 1 x BPCC-7035 - Heel Guard, Carbon, Pair, Honda JC22 NSR125
- 2 x EXSL-0132(p) - Silencer, Carbon, Round, Carbon End Cap, 43 mm. x 380mm, No Fittings
- 2 x TYTO-0019 - Holder, Fork, 52mm
- 1 x TPER-2044 - Woodruff Key, Offset, 2 Degrees, NSR250
- 2 x TYTO-0011D - Carbon/Kevlar Workshop Tray, Large (360x240x1.2mm)
- 1 x KOYO-6302-2RS - Bearing, Koyo 6302-2RS
- 3 x TYLY-0298 - Set, 2T Blank Plug and Blank Plug Holder
- 1 x BPFL-7050 - Belly Pan, GRP, Stock Shape, Yamaha RX-Z 135
- 1 x TPER-0025 - TYGA 300cc Cylinder Head Rear. *
- 1 x TYLY-1099 - Front Fork Preload Adjusters, Black/Gold, Pair, Ninja 400
- 1 x TYTO-0016 - Pin Spanner
- 1 x TMER-0157 - TYGA Bike Dust Cover, Red, Honda Wing, Silver
- 1 x TMER-0158 - TYGA Bike Dust Cover, Blue/Light Blue, Suzuki
- 1 x 83551-300-000 - Case Grommet
- 3 x SCRE-0052 - Screen Tint, CBR400RR NC29, Kit.
- 2 x TMER-0155 - TYGA Bike Dust Cover, Red, Honda Wing, White
- 1 x 99101-MCG-1480 - Main Jet, KEIHIN, (99101), #148
- 1 x SCRE-1163 - Screen Clear, TYGA Style KTM Fairing, Tall Version, Kit.
- 1 x EXSL-8313L(p) - Silencer, Stainless Moto Maggot, 35 mm., Left, Grom, No fittings
- 2 x CKA-Honda-MC19 - Carb Service Kit A, 16 pieces, Honda CBR250R MC14, MC17 & MC19
- 1 x EXPS-0067 - Set, Pipe, Full Race System, High level, MSX125SF Grom, Stainless Oval/Carbon End Cap
- 3 x EXCB-0003R - Exhaust Chamber, Right, Side By Side Type, Stainless Steel, MC18
- 5 x EXMN-0011 - Collar, Manifold, Mild Steel, KRR150
- 6 x EXCB-0010L - Exhaust Chamber, Left, GP Type, Stainless Steel, RGV250, VJ22
- 1 x STAA-0005 - Racing Step Kit, VJ22 RGV250
- 3 x BPAC-0015 - Set, Windscreen Molding, and Clips
- 1 x BPSY-0325L - Stay, Standard, Side Cowl, Left, NC30
- 1 x CKB-Honda-NC31 - Carb Service Kit B, 21 pieces, Honda CB400 Super Four NC31
- 1 x SHCC-0001 - Face Shield, Carbon
- 2 x SCRE-0164 - Screen Tint, TYGA Style KTM Fairing, Kit
- 1 x EXPT-0076 - Section, Final Shorty, Stainless, Monkey 125
- 1 x BPSY-0325R - Stay, Standard, Side Cowl, Right, NC30
- 1 x TMER-0115 - TYGA Bike Dust Cover, Blue, Rothmans Honda
- 1 x AS-001 - Air Box Seal Kit, 4 pcs, Honda CBR250RR MC22 / VFR400 NC35
- 1 x EXPS-0018 - Set, Pipe, Full Race System, Round Aluminium Silencer, Ninja 250
- 1 x EXPS-0123 - Set, Pipe, L.H Exit, Full Race System, VFR750F 4th Gen, 94-97, Oval Stainless Silencer
- 1 x STHB-1010 - Bush, 10mm x 10,5mm
- 1 x BPCG-0002 - Fuel Tank, Carbon, RS250R NX5 (Ram Air Type)
- 1 x BPCT-7051 - Seat Cowling, Carbon, Honda CB400 Super Four (1992-1996)
- 1 x TYLY-0013 - Kickstart Plug
- 1 x BPFG-0007 - Fuel Tank, GRP, VFR750R RC30, Unpainted
- 1 x TPER-0012 - Steering Stopper, MC21/28
- 1 x TWHL-0015 - Forged Aluminium Racing wheel set, 5 spoke, PVM, Front 3.50 x 17, Rear 5.50 x 17, Satin Black
- 1 x BPCH-9021 - Rear Hugger/Chain Guard, Carbon, VJ21 RGV250
- 1 x BPFX-0007 - Airbox, GRP, NSR250 MC21/MC28
- 1 x BPCC-0066 - Stay, Horn, Carbon, NSR250 MC21/MC28
- 1 x BPCC-7419L - Frame Cover, Left, Carbon RGV250 VJ22
- 1 x TWHL-0014 - Forged Aluminium Racing wheel set, 5 spoke, PVM, Front 3.50 x 17, Rear 5.50 x 17, White
- 1 x BPFX-7049(p) - Cover, Lower Left, GRP, Gloss Black, VFR750F 3rd Gen, 90-93
- 1 x BPCC-0071 - Carbon Tank Filler Cap Cover, Kawasaki Type 1
- 1 x BPCX-0010(lower) - Throttle Cover, Lower, Carbon, NSR250 MC18/21/28
- 1 x BPCC-7046L - Frame Cover, Carbon, Left, RGV250, VJ23
- 1 x TPER-0024 - Wheel, Front. Aluminium Spacer kit NSR250 MC21/28 & VFR400R NC30
- 1 x BPFG-0008 - Fuel Tank, GRP, RVF400 NC35, Unpainted
- 1 x BPCC-7121L - Frame Cover, Left, Carbon, RGV250 VJ21 (Frame without Steering Damper)
- 1 x BPCX-7146L - Swing Arm Cover, Carbon, Left, RVG250, VJ23
- 1 x BPCC-0057R - Stay Radiator, Right Lower, Carbon, RGV250 VJ21
- 1 x BPCX-0031B - Air Duct, Carbon, MC28
- 2 x 99101-KPE-1380 - Main Jet, KEIHIN, (99101), #138
- 1 x 99101-GHB-1220 - Main Jet, KEIHIN, (99101), #122
- 2 x 99101-GHB-1250 - Main Jet, KEIHIN, (99101), #125
- 2 x 99101-MCK-1750 - Main Jet, KEIHIN, (99101), #175
- 1 x TPER-0049 - Carbon Reeds, Honda NS400
- 2 x EXSG-0001 - Spring, Exhaust, Two Stroke
- 1 x BPSY-0143 - Fairing Stay, Side, Pair, Carbon, NSR250, GP-T, Assy.
- 2 x BPLT-0038 - Turn Signal Set, Black/Blue, RC30 Style
- 1 x TPER-0112 - Breather Cap, Aluminium CNC, RC30/NC30/MC18
- 2 x EXCS-0007 - Set, Exhaust Chamber, Side By Side Type, Stainless Steel, Aprilia RS-250
- 2 x TYTO-0017 - Spring Puller
- 2 x EXMC-0007 - Clamp, Manifold, RGV250/Aprilia RS250
- 2 x EXCS-0035 - Set, Exhaust Chamber, Stainless Steel, KRR150ZX
- 1 x STAA-0037 - Step Kit (Street), (Adjustable), KTM RC390 (2022-2024)
- 1 x BPFC-7052 - Inner Cowling, GRP, Stock Shape, TZR250 3MA
- 2 x EXMN-0002 - Collar, Manifold, NSR150SP
- 2 x EXSL-0065 - Silencer, Shorty, Carbon, Two Stroke, Assy.
- 1 x TYLY-1531 - Top Triple Clamp, and Handlebar Clamp Set, Black, KTM RC Series 2022-2024
- 1 x TMER-0181 - TYGA Bike Dust Cover, Blue/Black, Yamaha MT07, Naked bike size.
- 2 x EXCS-0019 - Set, Exhaust Chamber, Stainless Steel, Aprilia RS-125
- 2 x EXCS-0048 - Set, Exhaust Chamber, Mini, Titanium
- 1 x EXPS-0160 - Set, Pipe, Full Race System, WSS300, KTM RC390 2022-2024
- 1 x BPFH-9021 - Rear Hugger/Chain Guard, GRP, Black, VJ21 RGV250
- 1 x OSYEP-T92-RF - Key Ring, Honda, Red.
- 2 x CKA-Honda-VFR750F-RC36 (94-97) - Carb Service Kit A, 48 pieces, Honda VFR750F RC36 (94-97)
- 1 x CKA-Honda-VFR750F-RC36 (90-93) - Carb Service Kit A, 40 pieces, Honda VFR750F RC36 (90-93)
- 2 x CKA-Honda-MC22 - Carb Service Kit A, 20 pieces, Honda CBR250RR MC22
- 1 x CKA-Suzuki-GSXR400-GK76 - Carb Service Kit A, 36 pieces, Suzuki GSXR400 (GK76)
- 4 x SCRE-0094 - Screen Clear, Stock Shape, ZXR250C, Kit.
- 4 x SCRE-0097 - Screen Tint, CBR929, Kit.
- 1 x EXCB-0051R - Exhaust Chamber, Right, Yamaha TZR250 (3MA)
- 1 x EXSL-0017 - Silencer, Stainless, Oval, Four Stroke, Stainless, Assy.
- 2 x TMER-0081 - TYGA Bike Dust Cover, Red/Black, Honda RVF
- 1 x SCRE-0047 - Screen Tint, TYGA EYES/NSR150SP, Kit.
- 4 x SCRE-0100 - Screen Race Tint, 2004-5 CBR1000RR, Kit.
- 3 x SCRE-0145 - Screen Double Bubble Clear, ZXR400C, Kit.
- 1 x EXCB-0031R - Exhaust Chamber, Right, Side By Side Type, Stainless Steel, RGV250 VJ21
- 4 x SCRE-0128 - Screen Dark Tint, Double Bubble, RGV250 VJ21, Kit.
- 1 x TMER-0050 - TYGA Bike Dust Cover, Black/Green
- 3 x SCRE-0021 - Screen Clear, NSR250 MC28, Kit.
- 3 x SCRE-0017 - Screen Tint, NSR250 MC21, Kit.
- 1 x TMER-0068 - TYGA Bike Dust Cover, Blue/Black, Honda NSR
- 4 x SCRE-0122 - Screen Dark Tint, RGV250 VJ21, Kit.
- 2 x EXMN-0020 - Collar, Manifold, RGV250 VJ23
- 1 x 83642-KY2-700 - Col Side CW Set
- 1 x EXOR-0012 - Replacement O-ring, Exhaust Valve Cover, RGV250/Aprilia RS250
- 1 x BPSY-0024 - Stay, Pair, Universal Sports Fender
- 1 x BPSY-0349 - Collar, Front Tank Mount
- 1 x BPCG-0008 - Fuel Tank, Carbon, RVF400 NC35
- 1 x CLIP-0600 - Clip, M6 (10 pieces)
- 1 x TYLY-0251 - Coolant Reservoir Fitting Kit
- 1 x JTST-0410 - Domehead Bolt M4x10 (10 pieces)
- 1 x 95701-06012-00 - Bolt, Flange 6x12
- 1 x EXPS-0091 - Set, Pipe, Full Race System, Serpent, KTM RC390, 2014-2021, Stainless Oval/Carbon End Cap
- 1 x EXPS-0143 - Set, Pipe, Slip On, Mesh, Slash Cut, KTM 390 Duke
- 1 x EXPS-0100 - Set, Slip-On, Stainless Moto Maggot, 43 mm, Ninja 400
- 1 x BPCG-0003 - Fuel Tank, Carbon, RS250R NX5 (Early Type)
- 1 x BPFT-0007B - Luggage Compartment Door, GRP, NSR250 MC28
- 1 x 12251-KW6-961 - Gasket, Head, NSR150SP
- 1 x BPFT-9204 (Painted RR) - Seat Cowling, GRP, NC35, Dual, Stock Shape (Painted RR)
- 1 x BPSY-0045 - Stay, Lower
- 1 x BPFT-9034 - Seat Cowling, GRP, NC30/NC35 GP-T
- 1 x BPFL-9122 - Lower Cowling, GRP, Stock Shape, 1989 NSR250, MC18
- 1 x BPFT-0001 - Seat Cowling, GRP, NSR250 MC21, Stock Shape, Race
- 1 x BPFL-9134 - Lower Cowling, GRP, NC35, GP-T, Assy.
- 1 x BPFX-9121 - Registration/License Plate Holder, Assy., GRP, VJ21
- 1 x BPFX-9124 - Passenger Seat Cover, GRP, CBR250R
- 1 x BPFL-0002 - Lower Cowling, GRP, NSR250 GP, Assy.
- 1 x TPER-3044 - Woodruff Key, Offset, 3 Degrees, NSR250
- 1 x BPFX-7001 - Tank Cover, Race, GRP, 2004-5 CBR1000RR
- 1 x BPFT-9026 - Seat Cowling, GRP, VJ22, GP Style, Assy.
- 1 x BPFX-9128 - Rear Fender Special, GRP, ZXR250C
- 2 x TPER-0052 - Flange, Silencer Mounting, Stainless Steel
- 1 x TPER-0031 - Piston Pin, 300cc Piston *
- 1 x TPER-0032 - Piston Circlip set, 300cc Piston *
- 1 x 91102-KV3-771 - Bearing, Piston, MC28
- 1 x BPFT-9113 - Seat Cowling, GRP, NC30, RVF Race Style, No Tail Light
- 1 x BPFT-7001 - Seat Cowling, Race, GRP, 2004-5 CBR1000RR, Assy.
- 1 x TPER-0005 - Power Jet #0, for NSR250 MC18/21/28.
- 1 x 99101-MEG-1300 - Main Jet, KEIHIN, (99101), #130
- 1 x TPER-5007 - Crankshaft Seal, Centre, MC16 and MC18 (R2J/R4J)
- 1 x 99101-MAL-1400 - Main Jet, KEIHIN, (99101), #140
- 1 x 99101-GHB-1620 - Main Jet, KEIHIN, (99101), #162
- 1 x 99101-GHB-1200 - Main Jet, KEIHIN, (99101), #120
- 1 x 99101-GHB-1120 - Main Jet, KEIHIN, (99101), #112
- 1 x 99101-KPE-1350 - Main Jet, KEIHIN, (99101), #135
- 1 x TPER-5008 - Needle Roller Bearings, Set, MC16, MC18 (R2J/R4J)
- 1 x 99101-393-1600 - Main Jet, KEIHIN, (99101), #160
- 1 x 99101-MAA-1850 - Main Jet, KEIHIN, (99101), #185
- 1 x 99101-GHB-1320 - Main Jet, KEIHIN, (99101), #132
- 2 x TYLY-0326 - Pro-Arm Hub Conversion Assy, Pro-Arm Underslung Caliper, NC30 Hub, Single Nut Wheel, RC36-2
- 1 x TPER-0120 - Connector Rubber, Silencer, Blue, RGV250 VJ21/VJ22
- 2 x TPER-7049 - Fork Shortening Kit, RC36-2, RC30 Style
- 2 x TPER-0119 - Connector Rubber, Silencer, Black, RGV250 VJ21/VJ22
- 1 x EXCS-0010 - Set, Exhaust Chamber, GP Type, Stainless Steel, RGV250 VJ22
- 1 x EXOR-0001 - O Ring, Aprilia/RGV250 Exhaust Manifold (single)
- 2 x TYWH-0009 - Switch Assembly, Winker, NC30
- 1 x BPFH-7053 - Hugger, GRP, Gilera CX125
- 1 x BPCC-7053 - Side Cover, Pair, Carbon, Gilera CX125
- 1 x TPER-0022 - Flange, Silencer Mounting, Mild Steel
- 1 x EXSL-0067 - Silencer, Shorty, Aluminium Premium, Two Stroke, Assy.
- 1 x TMER-0183 - TYGA Bike Dust Cover, Red/White Yamaha
- 1 x KC-KW6(KEIHIN) - Carburetor Assy, Keihin, NSR150SP
- 1 x EXCS-0024 - Set, Exhaust Chamber, Stainless Steel, NSR150SP
- 1 x EXCS-0044 - Set, Exhaust Chamber, Crossover Type, Stainless Steel, Mirror, Yamaha RD350LC (4L0)
- 1 x EXSL-9005 - Silencer, Aluminium Premium, Two Stroke, Assy.
- 1 x EXCS-0031 - Set, Exhaust Chamber, Side By Side Type, Stainless Steel, RGV250 VJ21
- 1 x EXCS-0027 - Set, Exhaust Chamber, Clearcoated Mild Steel, KRR150ZX
- 1 x EXSL-0003 - Silencer, Carbon, Two Stroke, Assy.
- 2 x EXOR-0042 - O Ring, RGV250 VJ23 Exhaust Manifold (single)
- 1 x BPAC-0019 - Breather Hose, Fuel Tank, RC30 Style, Kit
- 1 x EXCS-0005B - Set, Exhaust Chamber, Side By Side Type, Stainless Steel, NSR250 MC28
- 2 x EXOR-0039 - O-Ring Viton, ID 45mm, THK 2mm
- 1 x EXMN-0003 - Collar, Manifold, NSR250
- 1 x EXCL-0009 - Clamp, Single, 61mm, Offset
- 1 x EXCS-0030 - Set, Exhaust Chamber, Stainless Steel, KRR150ZX
- 1 x EXCS-0039 - Set, Exhaust Chamber, Stainless Steel, NX5 RS250R
- 1 x TPER-0109 - Wheel, Front, Aluminium Spacer kit RVF400 NC35
- 1 x EXGS-0001 - Silencer Gasket (3 Hole, 2T)
- 1 x TYLY-0252 - Stay, Silencer, Aluminium, Universal
- 1 x EXCS-0029 - Set, Exhaust Chamber, Clearcoated Mild Steel, NSR150RR
- 1 x TYLY-0052 - Exhaust Silencer Hanger Stay Left, Aprilia RS250
- 2 x TYWH-0010 - Switch Assembly, Starter, NC30
- 1 x EXCS-0006A - Set, Exhaust Chamber, GP Type, Stainless Steel, NSR250 MC21
- 1 x EXCS-1044 - Set, Exhaust Chamber, Crossover Type, Stainless Steel, Yamaha RD350LC (4L0)
- 1 x BPCX-7153 - Pillion Seat Cover, Carbon, Gilera CX125
- 1 x EXCS-0009 - Set, Exhaust Chamber, Side By Side Type, Stainless Steel, RGV250 VJ22
- 1 x EXCS-0003 - Set, Exhaust Chamber, Side By Side Type, Stainless Steel, NSR250 MC18
- 2 x CK-Suzuki-RGV250-89-96 - Carb Service Kit, 8 pieces, Suzuki RGV250 (VJ21/VJ22)
- 1 x STAA-0038 - Racing Step Kit, SC33 CBR900RR
- 1 x EXCL-0010 - Clamp, Silencer, Single, 61mm., Central, Assy.
- 1 x EXSL-0083 - Silencer, Carbon, Two Stroke, 70mm, Assy
- 1 x EXMC-0020 - Clamp, Manifold, RGV250 VJ23
- 1 x EXCS-0051 - Set, Exhaust Chamber, Stainless, Yamaha TZR250 (3MA)
- 1 x EXCS-0050 - Set, Exhaust Chamber, Yamaha RX-Z 135
- 1 x EXCS-0006B - Set, Exhaust Chamber, GP Type, Stainless Steel, NSR250 MC28
- 2 x EXCL-0004 - Clamp, Silencer, GP, 70mm (2x Bolt)
- 1 x EXMN-0007 - Collar, Manifold, RGV250/Aprilia RS250
- 1 x CK-Honda-NC30 - Carb Service Kit A, 32 pieces, Honda VFR400R NC30
- 1 x CARB-0001(MC16,18,21) - Carb Service Kit, 7 pieces, Honda NSR250 MC16, MC18, MC21 (1 carburettor)
- 1 x CK-Honda-NC35 - Carb Service Kit A, 40 pieces, Honda RVF400 NC35
- 1 x CKA-Honda-NC31 - Carb Service Kit A, 20 pieces, Honda CB400 Super Four NC31
- 1 x CK-Honda-RC30 - Carb Service Kit A, 48 pieces, Honda VFR750R RC30
- 1 x CKA-Honda-NT650 - Carb Service Kit A, 10 pieces, Honda NT650
- 1 x TMER-3008-S - Tyga T shirt, Go the Mighty Maggot, White, S
- 1 x CK-Yamaha-1WG - Carb Service Kit, 39 pieces, Yamaha FZR400 1WG
- 1 x CKB-Honda-NC29 - Carb Service Kit B, 19 pieces, Honda CBR400RR NC29
- 1 x CARB-0002(MC28) - Carb Service Kit, 6 pieces, Honda NSR250 MC28 (1 carburettor)
- 1 x TMER-0171 - TYGA Tumbler
- 1 x TMER-3008-XL - Tyga T shirt, Go the Mighty Maggot, White, XL
- 1 x COK-001 - Coolant System Silicone O-Rings, 5 pieces, Honda CBR250RR MC22
- 1 x SHK-001-Honda-MC22 - Silicone Hose Kit, 6 pieces, Honda CBR250RR MC22
- 1 x TMER-3001-L - Tyga T shirt, Black, size: L
- 2 x SCRE-0134 - Screen Clear, TYGA T8-T10, Kit.
- 2 x SCRE-0031 - Screen Clear, For BPFU-0004, Kit
- 3 x SCRE-0056 - Screen Clear, Stock Shape, CBR250RR MC22, Kit.
- 3 x SCRE-0076 - Screen Clear, FZR400, Kit.
- 3 x SCRE-0083 - Screen Dark Tint, RC211V Style, Kit.
- 2 x SCRE-0149 - Screen Dark Tint, Double Bubble, NSR150SP, Kit.
- 3 x SCRE-0101 - Screen Race Clear, 2004-6 R1, Kit.
- 3 x SCRE-0026 - Screen Clear, GP250, Kit.
- 2 x SCRE-0066 - Screen, Clear, Stock Shape, 1996-97, Aprilia RS250, Kit
- 3 x SCRE-0032 - Screen Tint, For BPFU-0004, Kit
- 1 x SCRE-0144 - Screen Double Bubble Dark Tint, ZXR400A, Kit.
- 1 x SCRE-0042 - Screen, Light Tint, Stock Shape, RVF400 NC35, Kit.
- 2 x SCRE-0040 - Screen Double Bubble dark tint, NC30, Kit.
- 2 x SCRE-0048 - Screen Dark Tint, TYGA EYES/NSR150SP, Kit.
- 3 x SCRE-0072 - Screen Clear, Tyga Suzuka, Kit.
- 2 x SCRE-0039 - Screen, Double Bubble, Light Tint, NC30, Kit.
- 1 x SCRE-0067 - Screen, Light Tint, Stock Shape, 1996-97, Aprilia RS250, Kit.
- 3 x SCRE-0120 - Screen Clear, RGV250 VJ21, Kit.
- 3 x SCRE-0065 - Screen Tint, RGV250 VJ23, Kit.
- 3 x SCRE-0095 - Screen Tint, Stock Shape, ZXR250C, Kit.
- 2 x SCRE-0177 - Screen Clear, NSR250V
- 1 x SCRE-0139 - Screen, Ninja 250R, Dark Tint, Kit.
- 1 x SCRE-0162 - Screen Tint, TYGA GP-T, Kit
- 2 x SCRE-0062 - Screen Stock Shape, Tint, RGV250 VJ22, Kit.
- 1 x SCRE-0064 - Screen Clear, RGV250 VJ23, Kit.
- 2 x SCRE-0008 - Screen Dark Tint, 1988 NSR250 MC18, Kit.
- 3 x SCRE-0058 - Screen Dark Tint, Stock Shape, CBR250RR MC22, Kit.
- 3 x SCRE-0098 - Screen Tint, CBR954, Kit.
- 3 x SCRE-0130 - Screen dark tint, Double Bubble, RGV250 VJ22, Kit.
- 3 x SCRE-0099 - Screen Race Clear, 2004-5 CBR1000RR, Kit.
- 3 x SCRE-0137 - Screen OEM, Ninja 250R, Clear, Kit.
- 1 x SCRE-0148 - Screen Light Tint, Double Bubble, NSR150SP, Kit.
- 3 x SCRE-0002 - Screen Tint, NSR250 MC16, Kit.
- 3 x SCRE-0121 - Screen Tint, RGV250 VJ21, Kit.
- 1 x SCRE-0150 - Screen, Clear, Stock Shape, 1998-2006 Aprilia RS250, Kit.
- 2 x SCRE-0079 - Screen Clear, TYGA RSW style, Kit
- 2 x SCRE-0006 - Screen Clear, 1988 NSR250 MC18, Kit.
- 2 x SCRE-0093 - Screen Dark Tint, ZXR250A, Kit.
- 2 x SCRE-0118 - Screen Double Bubble Clear, CBR400RR NC23, Kit.
- 3 x SCRE-0125 - Screen Double Bubble Clear, Stock Shape, RVF400 NC35, Kit.
- 3 x SCRE-0127 - Screen Clear, Double Bubble, RGV250 VJ21, Kit.
- 2 x SCRE-0038 - Screen Double Bubble Clear, NC30, Kit.
- 2 x SCRE-0081 - Screen Clear, RC211V Style, Kit.
- 3 x SCRE-0036 - Screen Clear, NC30, Kit.
- 3 x SCRE-0096 - Screen Dark Tint, Stock Shape, ZXR250C, Kit.
- 2 x SCRE-0091 - Screen Clear, ZXR250A, Kit.
- 3 x SCRE-0051 - Screen Clear, CBR400RR NC29, Kit.
- 3 x SCRE-0088 - Screen Clear, MC19, Kit.
- 3 x SCRE-0123 - Screen Clear, Suzuki GSX-R1000 K7-K8, Kit.
- 3 x SCRE-0112 - Screen Clear, ZXR400C, Kit.
- 1 x SCRE-0007 - Screen Tint, 1988 NSR250 MC18, Kit.
- 2 x SCRE-0092 - Screen Tint, ZXR250A, Kit.
- 3 x SCRE-0027 - Screen Tint, GP250, Kit.
- 2 x SCRE-0132 - Screen, Double Bubble, Light Tint, RVF400 NC35
- 2 x SCRE-0147 - Screen Clear, Double Bubble, NSR150SP, Kit.
- 2 x SCRE-0113 - Screen Dark Tint, ZXR400C, Kit.
- 2 x SCRE-0107 - Screen Tint, TYGA T8, Kit.
- 3 x SCRE-0108 - Screen Tint, Kawasaki ZXR750/92, Kit.
- 3 x SCRE-0046 - Screen Clear, NSR150SP, Kit.
- 1 x SCRE-0181 - Screen, Clear, NC30, RC30 style
- 2 x SCRE-0043 - Screen Dark Tint, Stock Shape, RVF400 NC35, Kit.
- 1 x SCRE-0160 - Screen, Dark Tint, Stock Shape, 1996-97, Aprilia RS250, Kit
- 2 x SCRE-0176 - Screen Clear, NX5 RS250R (1995 NSR250 Style)
- 1 x SCRE-0168 - Screen Clear, NX5 RS250R (Late Model Style)
- 3 x SCRE-0016 - Screen Clear, NSR250 MC21, Kit.
- 2 x SCRE-0080 - Screen Tint, TYGA RSW style, Kit
- 2 x SCRE-0105 - Screen Double Bubble, Dark Tint, Stock Shape, RVF400 NC35, Kit.
- 2 x SCRE-0152 - Screen Dark Tint, Stock Shape, 1998-2006 Aprilia RS250, Kit.
- 3 x 64110-KW6-840 - Screen Clear, NSR150SP OEM Honda
- 2 x SCRE-0163 - Screen Clear, TYGA Style KTM Fairing, Kit
- 2 x SCRE-0161 - Screen Clear, TYGA GP-T, Kit
- 1 x SCRE-0055 - Screen Dark Tint, CBR400RR NC29, Kit.
- 2 x SCRE-0126 - Screen tint, ZXR400C, Kit.
- 3 x SCRE-0001 - Screen Clear, NSR250 MC16, Kit.
- 2 x SCRE-0115 - Screen Dark Tint, ZXR400A, Kit.
- 1 x SCRE-0179 - Screen, Clear, VFR750R RC30, Kit
- 1 x SCRE-0158 - Screen, Dark Tint, MiniRacerXtreme, MSX125 Grom
- 2 x SCRE-0085 - Screen Tint, TYGA GP2010 Fairing, Kit
- 3 x SCRE-0041 - Screen Clear, Stock Shape, RVF400 NC35, kit.
- 1 x SCRE-0167 - Screen, TYGA EYES KTM, RC series Upper Fairing
- 3 x SCRE-0116 - Screen Clear, CBR400RR NC23, Kit.
- 2 x SCRE-0061 - Screen Clear, Stock Shape, RGV250 VJ22, Kit.
- 2 x SCRE-0142 - Screen Dark Tint, TYGA T8-T10, Kit.
- 2 x SCRE-0143 - Screen Double Bubble Clear, ZXR400A, Kit.
- 1 x EXCL-0031 - Clamp, Silencer, Single, Oval, Large, Assy.
- 1 x EXMS-0119 - Mount Stay, VFR750F, 4th Gen, 94-97
- 1 x SCRE-0133 - Screen Dark Tint, NC30 VFR400, Kit.
- 2 x SCRE-0011 - Screen Clear, 1989 NSR250 MC18, Kit.
- 2 x FAPS-0001 - Screen Fastener Set, Assy.
- 1 x EXPT-1119 - Section, Header, Front Left, Stainless, VFR750F, 4th Gen, 94-97
- 1 x EXPT-0083 - Section, Final, Stainless, GROM
- 1 x EXPT-0057 - Section, Right #2, KTM RC390 Serpent
- 1 x EXCB-0035 - Exhaust Chamber, Stainless Steel, KRR150ZX
- 2 x 39154-0028 - Screen OEM, Ninja 250R
- 1 x EXCL-0026 - Clamp, Silencer, Single, Assy.
- 1 x EXCL-0015 - Clamp, Silencer, Twin Stack, Street, Carbon, Assy.
- 1 x EXSG-0003 - Spring, Exhaust, Short, Four Stroke
- 1 x SCRE-0084 - Screen Clear, TYGA GP2010 Fairing, Kit
- 1 x EXCL-0028 - Clamp, Oval, Carbon Silencer, Single, Ninja 250, Assy.
- 1 x EXPT-0078 - Section, Final, Stainless, WSS300 Race System, KTM RC390 2014-2021
- 1 x TYWH-0001 - Harness, Lambda, Ninja 250/300 2013-2018
- 1 x EXMC-0119 - Clamp Manifold, VFR750F, 3rd & 4th Gen
- 1 x SCRE-0102 - Screen Race Tint, 2004-6 R1, Kit.
- 1 x EXPT-1151 - Section, Header, Front Left, Stainless, VFR750F, 3rd Gen, 90-93
- 2 x 94631-33C01 - Molding, Windscreen, Universal
- 1 x EXPT-2119 - Section, Header, Front Right, Stainless, VFR750F, 3rd & 4th Gen
- 1 x BPSY-0180 - Stay, Silencer, Kawasaki Z125
- 1 x EXSL-0114 - Replacement Silencer, Stainless/Carbon End Cap
- 1 x EXCL-0044 - Clamp, Silencer, Twin Stack, Hi Level, Carbon, Assy.
- 1 x SCRE-0057 - Screen, Tint, Stock Shape, CBR250RR MC22, Kit.
- 1 x EXCL-0030 - Clamp, Pipe Section, 43-47mm.
- 2 x SCRE-0037 - Screen Tint, NC30, Kit.
- 2 x SCRE-0129 - Screen Clear, Double Bubble, RGV250 VJ22, Kit.
- 1 x EXSL-0056 - Replacement Silencer, Slip On, Carbon, Oval/Carbon End Cap, Yamaha R25/R3
- 1 x EXCL-0024 - Clamp, Silencer, Single, 86mm., Assy.
- 1 x SCRE-0110 - Screen Clear, 2003-4 CBR600RR, Kit.
- 1 x EXPT-9119 - Section, Final, R.H Exit, Stainless, VFR750F 3rd & 4th Gen
- 1 x SCRE-0111 - Screen Tint, 2003-4 CBR600RR, Kit.
- 2 x SCRE-0087 - Screen Tint, Suzuki GSX-R1000 K5-K6, Kit.
- 1 x EXCL-0034 - Clamp, Round Stainless Silencer, Single, M10
- 1 x EXPT-4119 - Section, Header, Rear Right, Stainless, VFR750F, 3rd & 4th Gen
- 1 x EXMN-0009L - Manifold, Left, Ninja 250
- 1 x EXMN-0012L - Manifold, Left, Ninja 250/300
- 1 x EXPT-0006 - Section, Pipe, Stainless, CBR125
- 1 x EXPT-3151 - Section, Header, Rear Left, Stainless, VFR750F, 3rd Gen, 90-93
- 1 x EXPT-0005 - Section, Pipe, Underbelly, Full Race System, MSX125 Grom
- 1 x EXPT-0086 - Section, Final, Stainless, Twin Exit, Right, High Level, GROM
- 1 x EXCL-0012 - Clamp, Silencer, GP (61mm., 2x Bolt)
- 1 x EXSL-0109 - Silencer, Stainless, Round, WSS300, Assy, KTM RC390 2022-2024
- 2 x SCRE-0089 - Screen Tint, MC19, Kit.
- 2 x SCRE-0119 - Screen Double Bubble Dark Tint, CBR400RR NC23, Kit.
- 1 x TYLY-0052(p) - Exhaust Silencer Hanger Stay Arm, Aprilia RS250
- 1 x EXSG-0004 - Spring, Exhaust, Swivel Head, Short, Four Stroke
- 1 x EXDK-0004 - Decibel Killer, Silencer, Stainless, Moto Maggot, 49mm
- 1 x EXCL-0038 - Clamp, Oval Stainless Silencer, Single, Assy.
- 1 x SCRE-0146 - Screen Double Bubble Dark Tint, ZXR400C, Kit.
- 1 x EXMN-0009R - Manifold, Right, Ninja 250
- 1 x EXPT-5151 - Section, Collector, Intermediate, Lower, Stainless, VFR750F
- 1 x EXPT-0055 - Section, Right #1, KTM RC390 Serpent
- 1 x EXPT-0025 - Section, Intermediate, Stainless, Yamaha R25/R3
- 1 x EXPT-0054 - Section, Left #1, KTM RC390 Serpent
- 1 x EXMS-0004 - Mount Stay, Exhaust, RGV250 VJ21, Assy
- 1 x 18291-MN5-650 - Gasket, Exhaust
- 1 x EXCL-0013 - Clamp, Silencer, Single, 4 inch, Assy.
- 1 x EXMS-0051 - Stay, Silencer, Yamaha TZR250 (3MA)
- 1 x EXSG-0002 - Spring, Exhaust, Swivel Head
- 2 x SCRE-0117 - Screen Dark Tint, CBR400RR NC23, Kit.
- 1 x EXCL-0032 - Clamp, Silencer, Single, 120mm., Assy.
- 1 x 64102-MA3-720 - Clip, Screen Molding
- 1 x BPSY-0167 - Stay, Silencer, KTM RC390 Serpent
- 1 x SCRE-0138 - Screen, Ninja 250R, Tint, Kit.
- 2 x SCRE-0086 - Screen Clear, Suzuki GSX-R1000 K5-K6, Kit.
- 2 x SCRE-0012 - Screen Tint, 1989 NSR250 MC18, Kit.
- 2 x SCRE-0082 - Screen Tint, RC211V Style, Kit.
- 1 x EXMN-0119 - Collar, Manifold, VFR750F, 3rd & 4th Gen
- 1 x EXCL-0035 - Clamp, Round Stainless Silencer, Single, M8
- 1 x EXPT-0087 - Section, Intermediate, Stainless, Twin Exit, High Level, GROM
- 1 x EXPT-0036 - Section, Intermediate, Stainless, MSX125 Grom
- 1 x EXPT-0008 - Section, Pipe, Stainless, CBR150
- 1 x SCRE-0090 - Screen Dark Tint, MC19, Kit.
- 1 x EXCL-0039 - Clamp, 4 Inch Round Stainless Silencer, Single, M10
- 1 x EXCL-0036 - Clamp, Silencer, Single, Oval, PCX150, Assy.
- 1 x EXPT-0082 - Section, Intermediate, Stainless, High Level, GROM
- 1 x TYLY-0292 - Stay, Exhaust, Twin Stack, Hi Level, NC30/35, TYGA
- 1 x TYLY-0149 - Stay, Silencer, Yamaha R25/R3
- 1 x EXPT-0056 - Section, Left #2, KTM RC390 Serpent
- 1 x EXCL-0033 - Clamp, Silencer, Single, Oval, Assy.
- 1 x SCRE-0135 - Screen Tint, TYGA T8-T10, Kit.
- 1 x EXCL-0025 - Clamp, Silencer, Twin Stack, Street, Aluminium/Stainless, Assy.
- 1 x EXPT-0085 - Section, Final, Stainless, Twin Exit, Left, High Level, GROM
- 1 x EXMN-0012R - Manifold, Right, Ninja 250/300
- 1 x SCRE-0124 - Screen Tint, Suzuki GSX-R1000 K7-K8, Kit.
- 1 x EXPT-3119 - Section, Header, Rear Left, Stainless, VFR750F, 4th Gen, 94-97
- 1 x BPSY-0173 - Stay, Oval Silencer, MSX125SF Grom, Underbelly Exhaust
- 1 x EXSL-0052 - Replacement Silencer, Slip-On, Stainless, Oval/Carbon End Cap, Yamaha R25/R3
- 1 x EXDK-0003 - Decibel Killer, Silencer, Stainless, 49mm
- 1 x BPSY-0177 - Stay, Silencer, High Level Exhaust, MSX125 Grom
- 1 x EXPT-7151 - Section, Secondary A, R.H Exit, VFR750F, 3rd Gen, 90-93
- 1 x EXMN-0008 - Collar, Manifold, NC30/35
$73,821.14US