Section, Header, Right, Stainless, Yamaha YZF-R25 and YZF-R3 Used with EXPS-0072, EXPS-0073, EXPS-0074 and EXPS-0075.…
Section, Final, Rear, Twin Stack, Street, Stainless, NC30/35 Final tailpipe section (rear bank) for: EXPS-0003 Set, Pipe, Twin Stack System,…
Section, Header, Stainless, Kawasaki Z125Lambda Sensor Bung: M12…
Section, Header, Stainless, MSX125 Grom…
Section, Intermediate, Stainless, High Level, GROM …
Section, Intermediate, Stainless, MSX125 Grom…
Section, Intermediate, Stainless, Twin Exit, High Level, GROM …
Section, Intermediate, Stainless, Yamaha YZF-R25 and YZF-R3 Used with EXPS-0072, EXPS-0073, EXPS-0074 and EXPS-0075.…
Section, Collector, Stainless, Twin Exit, High Level, GROM …
Section, Final, Stainless, Twin Exit, Left, High Level, GROM…
Section, Final, Stainless, Twin Exit, Right, High Level, GROM…
Section, Mesh Slip-On, Stainless, Yamaha YZF-R25 and YZF-R3 For use with EXPS-0069 only. The Slip joint is…
Section, Pipe, Stainless, CBR125 CBR125 Pipe. Silencer not included.…
Section, Pipe, Stainless, CBR150 CBR150 Pipe. Silencer not included.…
Section, Pipe, Underbelly, Full Race System, MSX125 Grom Suitable for our exhaust systems EXPS-0064 and EXPS-0068 …
Mount Stay, VFR750F, RC36-2 Securely mounts the exhaust to the frame. Rubber mounted to eliminate vibration. Used in the…
Spring, Exhaust, Two Stroke. Replacement expansion chamber securing spring. Fits all TYGA two stroke systems. This is…
Spring, Exhaust, Swivel Head, Short, Four Stroke For Use with Tyga Kawasaki Ninja 250 system…
Stay, Exhaust, Twin Stack, Hi Level, NC30/35, TYGA This product is to…
Stay, Exhaust, Twin Stack, Street, NC30/35, TYGA This product is to be used exclusively with our TYGA Twin Stack Exhaust…
Stay, Maggot Silencer, MSX125SF, High Level Exhaust This product allows for the use of a TYGA Performance high level full…
Stay, Oval Silencer, MSX125SF, Underbelly Exhaust Stay, Silencer, Underbelly, MSX125 Grom Consisting of the following parts: 1x…
Stay, Silencer, Yamaha TZR250 (3MA) Replacement part for Yamaha TZR250 (3MA) exhaust system EXCS-0051…
Stay, Pipe Mount, Kawasaki Z125. This stay mounts the Z125 final section to the bike, neatly and securely and is…
Stay, Silencer, High Level Exhaust, MSX125 This product allows for the use of a TYGA Performance high level full race…
Stay, Silencer, Kawasaki Z125. This stay secures the silencer to the bike in a neat and tidy solution that is…
Stay, Silencer, Aluminium, Universal 25.4mm x 4.7mm Aluminium flat bar, pre-drilled at one end for fabricating your own…
Stay, Silencer, Yamaha YZF-R25 and YZF-R3 Used on EXPS-0072, EXPS-0073 and EXPS-0074. Two different length mounting bolts are provided to…
Clamp, 4" Round Stainless Silencer, Single, M10 Stainless steel clamp. Round with rubber protection for a firm, but friendly…
Clamp, Emission Canister, Yamaha YZF-R25 and YZF-R3 Used with EXPS-0072 EXPS-0073 and EXPS-0074 Relocates the emission canister for exhaust header…
Clamp, Manifold, NC30/35 Manifold Clamp. Fitted to rear cylinder port. For use with: EXPS-0002 Set, Pipe, Full Race System NC30-35 (No Silencer) EXPS-0011 Set, Pipe,…
Clamp, Oval, Carbon Silencer, Single, Ninja 250, Assy. Stainless steel clamp. Oval with rubber protection for a firm, but friendly…
Clamp, Oval Stainless Silencer, Single, Assy. Stainless steel clamp. Oval with rubber protection for a firm, but friendly grip on…
Clamp, Oval, Carbon Silencer, Single, Assy. Stainless steel clamp. Oval with rubber protection for a firm, but friendly grip on…
Clamp, Pipe Section, 43-47mm. Stainless steel clamp. 43-47mm. internal diameter Compatible with Spipe section EXPT-0013…
Clamp, Round Stainless Silencer, Single, M10 Stainless steel clamp. Round with rubber protection for a firm, but friendly grip on…
Clamp, Round Stainless Silencer, Single, M8 Stainless steel clamp. Round with rubber protection for a firm, but friendly grip on…
Clamp, Silencer, Ninja 250, Single, 4", Assy. Stainless steel clamp. 4" internal diameter with rubber protection for a firm, but…
Clamp, Silencer, Single, 120mm., Assy. Stainless steel clamp. 120 mm., internal diameter with rubber protection for a firm, but friendly…
Clamp, Silencer, Single, 4", Assy. Stainless steel clamp. 4" internal diameter with rubber protection for a firm, but friendly grip…
Clamp, Silencer, Single, 86mm., Assy. Stainless steel clamp. 86 mm. internal diameter with rubber protection for a firm, but friendly…
Clamp, Silencer, Single, Assy. Stainless steel clamp. With rubber protection for a firm, but friendly grip on your silencer. Includes…
Clamp, Silencer, Single, Oval, Assy. Stainless steel clamp. large oval, 122mm x 90mm internal dimensions with rubber protection for a…
Clamp, Silencer, Single, Oval, Large, Assy. Stainless steel clamp. large oval, (116 mm. C 91 mm.) internal diameter with rubber…
Clamp, Silencer, Single, Oval, PCX150, Assy. Stainless steel clamp. large oval, 122mm x 90mm internal dimensions with rubber protection for…
Clamp, Silencer, Twin Stack, Hi Level, Carbon, Assy. This four stroke silencer clamp…
Clamp, Silencer, Twin Stack, Hi Level, Stainless, Assy. This four stroke silencer clamp is specifically designed TYGA Twin…
Clamp, Silencer, Twin Stack, Street, Aluminium/Stainless, Assy. This four stroke silencer clamp is specifically designed TYGA Twin Stack NC30/35 Exhaust…
Clamp, Silencer, Twin Stack, Street, Carbon, Assy. This four stroke silencer clamp is specifically designed TYGA Twin Stack NC30/35 Exhaust…
Decibel Killer, Silencer, Stainless, Moto Maggot, 49mm This decibel killer is designed to reduce the noise from the…
Collar, Manifold, NC30/35 Manifold Collar. Fitted to rear cylinder port. For use with: EXPS-0002 Set, Pipe, Full Race System NC30-35 (No…
Decibel Killer, Silencer, Stainless, 35mm. Note, this is suitable for stainless silencer type EXSL-0057L EXSL-0057R EXSL-0049 EXSL-0060 EXSL-1142 EXSL-0058…
Harness, Lambda, Ninja 250/300 2013- This is an extension to allow the lambda sensor to be plugged into the stock…
Hook, Spring This product is a stainless steel spring hook to be welded to existing pipework when used with our…
Manifold, Left, Ninja 250 This is a replacement part. When ordering an exhaust system, this item is included in the price…
Manifold, Left, Ninja 250/300 This is a replacement part. When ordering an exhaust system, this item is included in the price…
Manifold, Right, Ninja 250 This is a replacement part. When ordering an exhaust system, this item is included in the price…
Manifold, Right, Ninja 250/300 This is a replacement part. When ordering an exhaust system, this item is included in the price…
Replacement Silencer, Slip On, Carbon, Oval/Carbon End Cap, Yamaha R25/R3 Hand assembled with carbon sleeve. Precision made CNC…
Replacement Silencer, Slip-On, Stainless, Oval/Carbon End Cap, Yamaha R25/R3 Hand assembled with brushed stainless steel sleeve. Precision made…
Clamp, Silencer, GP (61mm., 2x Bolt) This GP silencer clamp is specifically designed TYGA GP style expansion chambers for…
Clamp, Silencer, GP, 70mm (2x Bolt) Fabricated in 304 Stainless Steel with Molded rubber for secure, yet safe…
Clamp, Silencer, GP, 70mm (1x Bolt) Designed to securely clamp 70mm. O.D. silencers. Fabricated in 304 Stainless Steel…
Cartridge, Long Strand Glass Wool, Four Stroke, 2" This is a replacement glass wool cartridge ideal for repacking Tyga or…
Section, Header, Stainless, WSS300 Race System, KTM RC390/390 Duke Replacement Header section for Full Systems EXPS-0111, EXPS-0112, EXPS-0113, EXPS-0141,…
Section, Final, Stainless, WSS300 Race System, KTM RC390 20147-2021 Replacement part to be used with EXPS-0111 and EXPS-0112…
Section, Final, Stainless, WSS300 Race System, KTM RC390 2022-2023 Replacement part to be used with EXPS-0160…
Silencer, Stainless, Round, WSS300, Assy, KTM RC390 2022-2023 Replacement Silencer for WSS300 Race System EXPS-0160 The 'slip-on'…
Replacement Silencer, Stainless/Carbon End Cap Used with EXPS-0072 and EXPS-0144…
O Ring, Aprilia/RGV250 Exhaust Manifold (single) Replacement O rings for the TYGA exhaust manifold used with the TYGA expansion…
O Ring, RGV250 VJ23 Exhaust Manifold (single) Replacement O rings for the TYGA exhaust manifold used with the TYGA…
O-Ring Viton, ID 45mm, THK 2mm Replacement O rings for TYGA NSR250 expansion chamber. Remember to order…
Silencer Gasket (3 Hole, 2T) Replacement Gasket for the TYGA " Classic" 2 stroke silencers This is…
Exhaust Silencer Hanger Lock Joint, Aprilia RS250 Replacement part …
Exhaust Silencer Hanger Stay Arm, Aprilia RS250 Replacement part …
Mount Stay, Exhaust, RGV250 VJ21, Assy Mount kit for VJ21 chambers. This mount kit allows for fitment…
Section, Header, Front Left, Stainless, VFR750F, RC36-2 Header, Front Left, used on: EXPS-0119 (No Silencer) EXPS-0122 Oval Carbon/Carbon End…
Section, Header, Front Right, Stainless, VFR750F, RC36-1 & RC36-2 …
Section, Header, Rear Left, Stainless, VFR750F, RC36-2 Header, Rear Left, used on the following TYGA exhaust sets: EXPS-0119 …
Section, Collector, Intermediate, Lower, Stainless, VFR750F, RC36-1 & RC36-2 …
Section, Collector, Intermediate, Upper, Stainless, VFR750F, RC36-1 …
Section, Header, Front Left, Stainless, VFR750F, RC36-1…
Section, Header, Rear Left, Stainless, VFR750F, RC36-1…
Section, Secondary A, R.H Exit, VFR750F, RC36-1 …
Section, Secondary B, R.H Exit, VFR750F, RC36-1…
Section, Header, Rear Right, Stainless, VFR750F, RC36-1 & RC36-2…
Collar, Manifold, VFR750F, RC369-1 & RC36-2 Manifold Collar. Fitted to rear cylinder port. …
Clamp Manifold, VFR750F, RC36-1 & RC36-2 Manifold Clamp. Fitted to rear cylinder port. …
Section, Final, R.H Exit, Stainless, VFR750F RC36-1 & RC36-2…
Silencer, Stainless, Round, Four Stroke, 50.8mm. bore, Sleeve, 4 inch X 430mm (No fittings) Replacement silencer and…
Silencer, Aluminiumt, Round, Four Stroke, 50.8mm. bore, Sleeve, 4 inch X 430mm (No fittings) Replacement silencer and…