TYGA Tools
We have a range of specialist tools which are specific to the needs of our customers to make home maintenance a pleasure.
Some are tools we purchase to pass on to you, and others we design ourselves just make a usually tricky job somewhat less painstaking.
Carbon/Carbon Workshop Tray, Small (300x200x1.2mm)
Carbon/Carbon Workshop Tray, Small (300x200x1.2 mm) Using high end automotive and aerospace technology, this useful and beautiful tray…
- Model
- TYTO-0004A
- Quantity
- 3
Kevlar/Kevlar Workshop Tray, Small (300x200x1.2mm)
Kevlar/Kevlar Workshop Tray, Small (300x200x1.2mm) Using high end automotive and aerospace technology, this useful and beautiful tray will…
- Model
- TYTO-0004B
- Quantity
- 7
Kevlar/Carbon Workshop Tray, Small (300x200x1.2mm)
Kevlar/Carbon Workshop Tray, Small (300x200x1.2 mm) Using high end automotive and aerospace technology, this useful and beautiful tray…
- Model
- TYTO-0004C
- Quantity
- 5
Carbon/Kevlar Workshop Tray, Small (300x200x1.2mm)
Carbon/Kevlar Workshop Tray, Small (300x200x1.2mm) Using high end automotive and aerospace technology, this useful and beautiful tray will be…
- Model
- TYTO-0004D
- Quantity
- 4
Engine Stand, Aprilia RS-250/RGV250
Engine Stand, Aprilia RS-250/RGV250 Engine stand for Aprilia RS-250 and RGV250, (VJ21 and VJ22 models). No more chasing…
- Model
- TYTO-0029
- Quantity
- 3
Engine Stand, NSR250
Engine Stand, NSR250 Engine stand for NSR250. No more chasing the engine around the bench as this stand allows…
- Model
- TYTO-0006
- Quantity
- 10
Engine Stand, NX5/NXA
Engine Stand, NX5/NXA No more chasing the engine around the bench as this stand allows for dual positioning so…
- Model
- TYTO-0033
- Quantity
- 2
Pro Arm chain adjusting tool
Pro Arm chain adjusting tool Developed in-house by TYGA Performance, this tool is the one for the job! No more…
- Model
- TYTO-0027
- Quantity
- 69
Spring Puller
Spring Puller Handy, tough, spring puller ideal for removal of exhaust mounting springs in those difficult to get…
- Model
- TYTO-0017
- Quantity
- 5
Castle Nut tool, MC21, NC30/35
Castle Nut tool, MC21, NC30/35 Tool to loosen/tighten the castle lock nut that secures the swingarm adjuster bolt on the…
- Model
- TYTO-0008
- Quantity
- 2
Castle Nut Tool, NSR150SP
Castle Nut Tool, NSR150SP Tool for removing the centre clutch nut on the Honda NSR150SP.…
- Model
- TYTO-0009
- Quantity
- 4
Clutch Holding Tool
Clutch Holding Tool Very useful tool for locking the clutch center hub while removing or tightening the hub lock nut.…
- Model
- TYTO-0023
- Quantity
- 1
Flywheel Holder / Pin Tool
Flywheel Holder / Pin ToolFlywheel holding tool for the NSR250, or anything with two holes to locate the pins of…
- Model
- TYTO-0026
- Quantity
- 1
Flywheel Puller, NSR150SP
Flywheel Puller, NSR150SP Genuine Honda tool for removing the flywheel.…
- Model
- TYTO-0007
- Quantity
- 3
Front Fork Overhaul Kit, MSX125 Grom
Front Fork Overhaul Kit, MSX125 Grom Overhaul Kit, MSX125 Grom Description: Special fork disassembly / assembly tools for MSX125 Grom…
- Model
- TYTO-0010
- Quantity
- 26
Shaft Holder, 25mm
Shaft Holder, 25mm This handy tool can be used to hold shafts, or any round object of 25mm…
- Model
- TYTO-0032
- Quantity
- 8
Holder, Fork, 41mm
Holder, Fork, 41mm This 41mm fork holding tool is very useful when servicing 41mm forks. Now there's no need for…
- Model
- TYTO-0018
- Quantity
- 4
Holder, Fork, 52mm
Holder, Fork, 52mm This 52mm fork holding tool is very useful when servicing 41mm forks. Now there's no need for…
- Model
- TYTO-0019
- Quantity
- 2
Pin Spanner
Pin Spanner This handy tool has many functions. It's primary use if as a locking device for hand held grinder…
- Model
- TYTO-0016
- Quantity
- 5
Tool Set, Shaft Holder, 5~22mm
Tool Set, Shaft Holder, 5~22mm This set includes three sizes of shaft holder. TYTO-0020, TYTO-0021 & TYTO-0022. Securely hold 18…
- Model
- TYTS-0001
- Quantity
- 8
Shaft Holder, 5~10mm
Shaft Holder, 5~10mm This handy tool can be used to hold shafts, bolts or any round object securely. …
- Model
- TYTO-0020
- Quantity
- 8
Shaft Holder, 11~16mm
Shaft Holder, 11~16mm This handy tool can be used to hold shafts, bolts or any round object securely. …
- Model
- TYTO-0021
- Quantity
- 11
Shaft Holder, 17~22mm
Shaft Holder, 17~22mm This handy tool can be used to hold shafts, bolts or any round object securely. …
- Model
- TYTO-0022
- Quantity
- 10
TYGA Flywheel Puller/RC Valve Remover Combo Tool, NSR250
TYGA Flywheel Puller/RC Valve Remover Combo Tool, NSR250 This new, TYGA designed 2 in 1 combination tool is a flywheel…
- Model
- TYTO-0014
- Quantity
- 20
Parking Brake, Carbon, Universal
Parking Brake, (Carbon), Universal The TYGA Parking Brake is simple but effective and fits pretty much every motorcycle…
- Model
- TYTO-0030
- Quantity
- 5
Burette / Pipette 20ml
Burette / Pipette 20ml This 20ml burette / pipette is necessary for accurate measurement of cylinder head volumes. …
- Model
- TYTO-0012
- Quantity
- 100+
0 items