Marco's Aprilia RS250 (Carbon Bodywork)
![](/images/00psm/08customersbotm/30102019rs250ms/aprs250marco01.JPG)
For our Customer Bike of the month October 2019 we have chosen Marco's Aprilia RS250
Marco who is from Germany put a lot of time and effort restoring his Aprilia RS250 and went for the TYGA-Performance GP bodywork in full carbon.
The project started with a Silver Romboni
![](/images/00psm/08customersbotm/30102019rs250ms/aprs250marco00.jpg)
![](/images/00psm/08customersbotm/30102019rs250ms/aprs250marco02.JPG)
![](/images/00psm/08customersbotm/30102019rs250ms/aprs250marco03.JPG)
The list of things Marco changed/restored/upgraded on his bike is impressive
- All rolling chassis parts were lacquered professionally soft.
- Frame, swingarm, rims and calipers in Gray Black tiger powdered.
- Motor cover slide cover, chain tensioner and shock absorber deflection in royal blue powdered silk.
- Fuel tank, oil and water tank from the model from 1998.
- All bearings renewed (wheel bearings, steering head bearings, swingarm bearings, suspension strut deflection)
- Wheel axles, swingarm axle and locknuts browned.
- Pulleys black burnished.
- Various Phillips screws in the engine swapped for titanium Allen.
- Tyga Sichtcarbon Street Front and Heckverkleidung incl carbon license plate carrier.
- New mirrors.
- Tyga carbon front and rear fender.
- Tyga carbon sprocket cover.
- Tyga Carbon Radiator Mount.
- Tyga Rear set Aluminum milled with carbon heel guards and aluminum shift linkage.
- Tyga antler and rear frame.
- Tyga sprocket aluminum blue anodized with titanium bolts and ProBolt aluminum nuts red.
- Motoscope per speedometer with carbon holder.
- Domino short-stroke throttle grip including new grip rubbers.
- Upper fork bridge milled aluminum.
- New fork service (new progressive spring, oil seals, oil)
- Strut service.
- New tires Bridgestone s21
- Performance Parts Aluminum stub with cnc milled holders.
- Cnc milled aluminum kickstand.
- Afam 3d Racing Chain + Pinion
- Jim lomas stainless steel system with classic carbon mufflers and carbon retainer.
- Kellermann bl 2000 handlebar end indicator.
- Kellermann atto rear turn signal.
- Kellermann turn signal relay.
- Titan engine retaining bolts.
- Titanium cylinder head nuts.
- Titanium brake discs v / h
- Titan engine cover screws.
- Various other titanium bolts and nuts.
- Various aluminum nuts and bolts (ProBolt)
- All cladding screws ProBolt aluminum blue.
- Aluminum fuel tank cap black / blue anodized with aluminum screws.
- New clutch friction discs including aluminum washers stronger springs, titanium clutch basket screws with titanium discs and an angry release lever.
- Melvin steel flex blue with red fittings and blue banjo bolts.
- Stahlbus brake bleeder valves.
- New brembo sinter pads front and rear
- Calipers newly sealed.
- Milled aluminum angle valves.
- Aluminum bobbins.
- Electrics minimized.
- JMT lithium battery.
- Silicone radiator hoses blue.
- All liquids new.
- New regulator with greater cooling capacity.
- The complete forester all around carefree package incl invoice consisting of:
- Complete engine overhaul
- Crankshaft finely balanced to 0,00mm
- Forester cylinder heads
- New pistons
- Overflow adapted
- Changed tax times
- Reinforced slides
- Carburettor adapted.
- Completely new stored, sealed and pressed.
- Expected power stable 75 hp (not yet retracted and fine-tuned, but runs like a clockwork)
- The vehicle weighs ready to go Fully fueled, oil and water maximum 132 kg!
|
![](/images/00psm/08customersbotm/30102019rs250ms/aprs250marco04.JPG)
![](/images/00psm/08customersbotm/30102019rs250ms/aprs250marco06.JPG)
![](/images/00psm/08customersbotm/30102019rs250ms/aprs250marco07.JPG)
![](/images/00psm/08customersbotm/30102019rs250ms/aprs250marco28.JPG)
![](/images/00psm/08customersbotm/30102019rs250ms/aprs250marco12.JPG)
![](/images/00psm/08customersbotm/30102019rs250ms/aprs250marco10.JPG)
![](/images/00psm/08customersbotm/30102019rs250ms/aprs250marco11.JPG)
![](/images/00psm/08customersbotm/30102019rs250ms/aprs250marco13.JPG)
![](/images/00psm/08customersbotm/30102019rs250ms/aprs250marco21.JPG)
![](/images/00psm/08customersbotm/30102019rs250ms/aprs250marco15.JPG)
Carbon Set, Aprilia RS-250 1996-2008
This set comprises the carbon products below. Enjoy great savings on product prices and shipping…
- Model
- BPFS-0050
- Quantity
- 3
Kit, Fairing Set, Street, Carbon, Aprilia RS-250 GP
Due to popular demand, our GP front fairing kit is now available…
- Model
- BPFS-1100
- Quantity
- 1
Kit, Seat Set, Street, Carbon, Aprilia RS-250 GP
Due to popular demand, our GP seat cowling kit is now available…
- Model
- BPFS-1102
- Quantity
- 2
Sprocket Cover, Carbon, Aprilia RS-250 Attractive alternative to the stock sprocket cover and uses original mounting bolts. …
- Model
- BPCC-7217
- Quantity
- 2
Racing Step Kit, Aprilia RS-250
Designed in-house by TYGA Performance using CAD/CAM software, these CNC machine-made step kits are manufactured…
- Model
- STAA-0006
- Quantity
- 6
Displaying 1 to 5 (of 5 products)