Morten's MC28 Rothmans
Morten's Honda NSR MC28 Rothmans
| Owner: | Morten Mondahl |
| Country: | Norway |
| Motorcycle Model: | Honda NSR250 MC28 |
| TYGA products used: | Bodywork, PVM Wheels, Exhaust Chambers and Silencers, Step KIt, Triple Clamp ( all TYGA products used listed below) |
This astonishing MC28 is the result of Mortens hard work with lot's of attention to every detail
" The plan was to make a modern factory looking NSR,keeping the iconic look of the front with the 90 headlight.
RVF USD forks with regular calipers so the front is not to modern.
|
Parts List Engine: -Vapour blasted. -Factory new crank -cylinders ported by Krazy-Katt, Bedford UK-new piston/rings -HRC jet kit -HRC P-030 PGM card -Zeeltronic coils -Custom made airbox with adjustable intakes. -New clutch plates and springs All new bearings, seals, gaskets, bolt, nuts etc TYGA-Performance parts: -PVM wheels -Aluminium upper stay -GRP tank -NSR250/GP500 upper cowling -GP-T seat cowling kit -CNC NC35 triple clamp -Carbon meter cover -Aluminium meter stay -Side by side exhaust w/ carbon silencers -Racing step kit -Brembo rear brake conversion -NC35 fork caps -NC35 front fender RC211V style Other parts: -T-2 racing modified carbon chainguard. -Custom made carbon chain guard bracket -Honda RVF400 front forks, rebuild and anodized -Triumph 675r side stand. -Daytona Nano II speedo with custom 3D printed bracket -Renthal handlebars -Titax brake leaver to fit brembo brake pump -Domino electric controls -Brembo P2 34 rear caliper -DID520 VX2 chain -EBC front brake discs -TWM fuel cap -TWM clutch lever -Custom made exhaust hangers -Rebuild rear damper -Oxford mini indicators -All wires are new Honda or T-2 racing -Samco hoses -Michelin Pilot Power 2CT 170/60 ZR17 and 120/60 XR17 All bolts, nuts and brackets are new or zink plated. |
Best Regards, Morten Mondahl, Norway "
Set, Exhaust Chamber, Side By Side Type, Stainless Steel, NSR250 MC28
Set, Exhaust Chamber, Side By Side Type, Stainless Steel, NSR250 MC28 Constructed in stainless steel, TYGA Performance combine modern technology…
- Model
- EXCS-0005B
- Quantity
- 4
Silencer, Shorty, Carbon, Two Stroke, Assy.
Silencer, Shorty, Carbon, Two Stroke, Assy. This high quality shorty (55mm shorter than our other silencers) lightweight silencer (0.40…
- Model
- EXSL-0065
- Quantity
- 100+
Fork Cap Kit, RVF400 NC35
Fork Cap Kit, RVF400 NC35
After 20+ years or so of hard use, many NC35's have damaged…
- Model
- TPER-0068
- Quantity
- 24
Kit, Seat Set, GRP, Street, MC28 GP-T
Kit, Seat Set, GRP (Street), MC28 GP-T This set of bodywork is designed to replace the stock seat cowling…
- Model
- BPFS-0133
- Quantity
- 1
Fuel Tank, GRP, NSR250 MC28, Unpainted
Fuel Tank, GRP, NSR250 MC28, Unpainted Top quality reproduction of the steel MC28 fuel tank in GRP. This…
- Model
- BPFG-0001
- Quantity
- 1
Clutch Cover, Carbon, NSR250 SE/SP, Assy.
Clutch Cover (Carbon) NSR250 SE/SP, Assy. Carbon cover to replace the nasty green plastic stock one on the NSR…
- Model
- BPCC-9006
- Quantity
- 5
Race Air Box Lid, Carbon, MC21/MC28
Race Air Box Lid, Carbon, MC21/MC28 Race Air Box Lid Carbon, MC21 The stock air box is restricted…
- Model
- BPCX-9010
- Quantity
- 4
Carbon Meter Cover MC28
Carbon Meter Cover MC28 Attractive carbon cover for MC28 meter assembly. For fitment, simply remove the three retaining bolts, stick…
- Model
- BPCC-0001
- Quantity
- 2
Radiator Shroud, Pair, Carbon, NSR250
Radiator Shroud, Pair, Carbon, NSR250 For carbon silver see BPSG-0011…
- Model
- BPCC-0011
- Quantity
- 2
Front Fender, GRP, NC35, 2006 RC211V style
Front Fender (GRP), NC35, 2006 RC211V style…
- Model
- BPFF-9005
- Quantity
- 2
Lower Cowling, GRP, NSR250 MC21, Race, Stock Shape, Assy.
Lower Cowling (GRP), NSR250 MC21, Race, Stock Shape, Assy. Stock shape, race lower cowling for the MC21. This…
- Model
- BPFL-0001A
- Quantity
- 2
Lower Cowling, GRP, NSR250 MC28, Race, Stock Shape, Assy.
Lower Cowling (GRP), NSR250 MC28, Race, Stock Shape, Assy. Stock shape, race lower cowling for the MC28. This…
- Model
- BPFL-0001B
- Quantity
- 2
Upper Cowling, GRP, NSR250 GP500 Style
Upper Cowling (GRP), NSR250 GP500 Style Be Michael Doohan! This upper cowling complete with carbon air scoops on…
- Model
- BPFU-0022
- Quantity
- 2
Meter Stay, MC28, Assy.
Meter Stay, MC28, Assy. Direct replacement for stock item, 50% of the weight Compatible Parts: All MC28 upper fairings…
- Model
- TYLY-0005
- Quantity
- 3
Upper stay, MC21/MC28, Stock Type
Upper stay, MC21/MC28, Stock Type Direct replacement for stock item, 50% of the weight Compatible Parts: Upper cowlings, Honda OEM…
- Model
- TYLY-0003
- Quantity
- 3
Turn Signal Relay, Replacement for Honda 1990s Type
Turn Signal Relay, Replacement for Honda 1990s Type. Electronically speed controlled flasher relay especially designed to be used with LED…
- Model
- TELC-0002
- Quantity
- 8
Racing Step Kit, MC28
Racing Step Kit, MC28 TYGA Performance Racing Step Kit assembly. Designed in-house by TYGA Performance using AutoCAD software, these CNC…
- Model
- STAA-0002B
- Quantity
- 1
Triple Clamp Set, CNC Silver, NC35 Forks to fit MC28
CNC machined TYGA triple clamp set for the MC28 to take NC35 forks. Designed and machined in-house by TYGA from aircraft…
- Model
- TYLY-0741
- Quantity
- 1
Bracket, Rear Brake, 84 mm Brembo Conversion, Silver, MC28/NC35
Bracket, Rear Brake, 84mm Brembo Conversion, Silver, MC28 and NC35. Consists of main caliper bracket and spacer for the rear disc…
- Model
- TYLY-0089
- Quantity
- 8
Front Brake Reservoir Stay, NSR250, Carbon
Front Brake Reservoir Stay, NSR250, (Carbon) Replacement for tired the stock front brake reservoir stay. This trick carbon stay…
- Model
- BPCC-9015
- Quantity
- 2
Sprocket, Rear 44T, #520, Stock, Stock, Aluminium, (Gold), MC28
Sprocket, Rear 44T, #520, Stock, Stock, Aluminium, (Gold), MC28 Upgrade your bike with TYGA Sprockets.
Designed and machined in…
- Model
- TYSR-0101-44T
- Quantity
- 2
Bearing, Countershaft, NSR250 MC18, MC21, MC28
Bearing, Countershaft Bearing, Countershaft, NSR250 MC18, MC21, MC28 This NSK bearing is a high quality, direct replacement for OEM bearing…
- Model
- TYPP-0006
- Quantity
- 19
Bearing, Mainshaft, NSR250 MC18, MC21, MC28
Bearing, Mainshaft, NSR250 MC18, MC21, MC28 This NSK bearing is a high quality, direct replacement for OEM bearing 91022-KV3-003.…
- Model
- TYPP-0008
- Quantity
- 8
Bearing, Mainshaft, Transmission Plate, NSR250 MC18, MC21, MC28
Bearing, Mainshaft, Transmission Plate, NSR250 MC18, MC21, MC28 This NSK bearing is a high quality, direct replacement for OEM…
- Model
- TYPP-0007
- Quantity
- 44
TYGA Bike Dust Cover, Blue/Black, Honda NSR
TYGA Bike Dust Cover, Blue/Black Honda NSR This cover is handmade from 100% breathable polyester and ideal for…
- Model
- TMER-0068
- Quantity
- 7
Paintwork, Rothmans
Paintwork, Rothmans Painted to order, allow 1-2 months for paintwork to be completed.…
- Model
- TYPA-0020
- Quantity
- 2
- 1 x EXSL-0003 - Silencer, Carbon, Two Stroke, Assy.
- 1 x APK1642700ZG - Rim Tape, 12 Inch, White, H2C
- 1 x BPCH-7228 - Splash Guard, Carbon, MSX125SF Grom
- 1 x STAA-0038 - Racing Step Kit, SC33 CBR900RR
- 2 x MG362-250-TRCL-19 - Rear Shock, YSS, Full Adjustment, MSX125 Grom
- 1 x BPFX-9023 - Rear Fender Special (with Carbon), NC29, Assy.
- 1 x 87130-KVG-900ZC - Decal, Honda, 100mm, T3, Red, (no background)
- 1 x H253-HDZ1-002RED - Clutch Lever CNC, Red, Flip Up Type.
- 1 x TYLY-1101 - Front Brake Reservoir Cover, BLUE, TYGA, MSX125 Grom
- 1 x STAH-0004 - Tyga Step Kit Replacement Right Side Hanger, NC30/35, Assy.
- 1 x 6002-037-00 - Rear Brake Light Switch, Honda Type
- 1 x LEVC-9011 - Clutch Lever CNC Black, NSR250, CBR250RR
- 1 x APK26507400TA - Pillion Foot Pegs, CNC, Grey
- 1 x LEVC-9042 - Clutch Lever CNC Titanium, NC29/ NC30/ NC35
- 1 x 90132-KPP-T00 - Bolt, Bodywork Mounting, non-collared, M6, CBR
- 1 x BPCC-9010R - Heel Guard, Right Only, Carbon
- 1 x LEVC-9012 - Clutch Lever CNC Black, NC29/ NC30/ NC35
- 1 x APK20A53100ZB - Hand Guard Set, Protaper, White, MSX125 Grom
- 1 x BPFS-0233 - Kit, Complete Bodywork Set, GRP, Type 1 Upper, with Front Fender, RS250R NXA
- 1 x TPER-0094 - Wheel, Aluminium Spacer Kit, MSX125 Grom
- 2 x BPAC-0001 - HRC Brake Reservoir Kit
- 1 x LEVB-7002 - Brake Lever CNC, TYGA, Adjustable, Flip-Up Type, MC21/28 Others
- 1 x BPSY-0250 - Rear Brake Hose Holder
- 1 x BPCX-0010 - Throttle Cover, Set, Carbon, NSR250 MC18/21/28
- 1 x LEVC-7001 - Clutch Lever CNC, TYGA, Adjustable, Flip-Up Type, NC30/35 Type RACE ONLY
- 1 x BPCF-9002 - Front Fender, Carbon, NC29-30 2006 RC211V Style
- 1 x EXSL-9005 - Silencer, Aluminium Premium, Two Stroke, Assy.
- 1 x TYLY-1222 - Tank Filler Cap, Keyless, Racing Type, Honda, Type 4
- 1 x VHM-NSR80 - VHM Cylinder Head NSR80/MBX80
- 1 x 6005-001-00 - Front Brake Light, Switch, Honda Type
- 1 x H052-A8Z1-0039BLACK - Clutch/Brake Mount Clamp), Black, Bikers
- 1 x OSYEP-T92-KF - Key Ring, Honda, Black.
- 1 x STGA-0001 - Tyga Step Kit Replacement Gear Shaft Clamp, NSR250
- 1 x STAR-1240 - Tyga Step Kit Replacement Link Rod, 240mm
- 1 x 35340-MGS-D31 - Front Brake Light Switch, Assy.
- 1 x EXSG-0001 - Spring, Exhaust, Two Stroke
- 1 x H136-A8Z1-0193RED - Top Triple Clamp Nut (M24x1), Red, Bikers
- 1 x JTA-H-WA-420-F-14T - Sprocket, Fr. 14T, MSX125 Grom
- 1 x TMER-0123 - TYGA Bike Dust Cover, Black, HRC (street)
- 2 x BPLT-0032 - Slim Style LED turn signal lamp Pair, Front
- 2 x BPLT-0031 - Slim Style LED turn signal lamp Pair, Rear
- 1 x STAH-0002A - Tyga Step Kit Replacement Right Side Hanger, MC21, Assy.
- 1 x BPCX-9008 - Air Duct, Carbon, RC211V Style, Assy.
- 1 x BPFU-9120F - Upper Cowling Front, Race, GRP, RC211V Style, Assy.
- 1 x TYTO-0004D - Carbon/Kevlar Workshop Tray, Small (300x200x1.2mm)
- 1 x APK20A53100ZA - Hand Guard Set, Protaper, Black, MSX125 Grom
- 1 x BPSY-0036 - Meter Stay Extension
- 1 x BPCL-9049 - Lower Cowling, Carbon, Stock Shape, RS250R NXA
- 1 x MX366-295-TRC-14-5 - YSS Rear Gas Shock, CBR250R/CBR300R
- 1 x LEVC-9031 - Clutch Lever CNC Silver, NSR250, CBR250RR
- 1 x APK2645513TA - Brake Reservoir Cap, Front, CNC, Grey
- 1 x TYLY-1221 - Tank Filler Cap, Keyless, Racing Type, Honda, Type 3
- 2 x TMER-0108 - Sidestand Shoe, Black
- 1 x STAH-0026 - Tyga Step Kit Replacement Right Side Hanger, MC21/28 Riser Assy.
- 1 x TYSR-0302-36TG - Sprocket, Rear 36T, #420, Stock, Aluminium, MSX125 Grom/Monkey125 (Gold)
- 1 x BPFU-0121 - Upper Cowling, GRP, NC30, RC30 Style, Street
- 1 x EXCS-0035 - Set, Exhaust Chamber, Stainless Steel, KRR150ZX
- 1 x TMER-0156 - TYGA Bike Dust Cover, Red, Honda Wing, Black
- 1 x BPCU-9049 - Upper Cowling, Carbon, Type 1, RS250R NXA
- 1 x STIC-0031 - Sticker Set, Feem, MSX125 Grom
- 2 x BPCC-9002 - Heel/Brake Guard, Tyga, Right, Carbon
- 1 x TMER-3009-XL - Tyga T shirt, Honda GROM, White, XL
- 1 x BPCU-9149 - Upper Cowling, Carbon, Type 2, RS250R NXA
- 1 x APK2664330ZA - Tank Grilles, Pair, Plastic, MSX125 Grom
- 1 x TYLY-0169 - Ignition Switch Holder, CNC Silver, CBR250R/CBR300R
- 1 x H134-A8Z1-0195GOLD - Front Brake Reservoir Cover, GOLD, Bikers
- 1 x TPER-0103 - Crank Bearing Support Kit, MSX125/Grom 1st and 2nd Gen
- 1 x BPLT-0030 - Slim Style LED turn signal lamp kit, Universal, Front Fairing.
- 1 x VHM-NSR250MC16 - VHM Cylinder Head Set NSR250 MC16
- 1 x STAA-0018 - Step Adjuster Plate NSR250 MC21/28, Assy
- 1 x TYSR-0302-34TG - Sprocket, Rear 34T, #420, Stock, Aluminium, MSX125 Grom/Monkey125 (Gold)
- 1 x TYLY-1095 - Handlebar Clamp, Monkey 125, MSX125 Grom, Black
- 1 x H052-A8Z1-0039GOLD - Clutch/Brake Mount Clamp), Gold, Bikers
- 1 x H252-HDZ1-001BLACK - Brake Lever CNC, Black, Flip Up Type.
- 1 x TYLY-2101 - Front Brake Reservoir Cover, BLACK, TYGA, MSX125 Grom
- 2 x BPCX-0005 - Universal, Swing Arm, Carbon Shark Fin Guard
- 1 x BPFU-9049 - Upper Cowling, Type 1, GRP, RS250R NXA
- 1 x STAA-0003 - Racing Step Kit, NC30/35
- 1 x TYSR-0302-35TG - Sprocket, Rear 35T, #420, Stock, Aluminium, MSX125 Grom/Monkey125 (Gold)
- 1 x TYLY-0127 - Top Triple Clamp Nut (M24x1), TYGA
- 1 x BPCC-0028 - Carbon Covers, Set, Instrument Surrounds
- 2 x LEVC-7002 - Clutch Lever CNC, TYGA, Adjustable, Flip-Up Type, Honda Straight Type
- 1 x TYLY-0095 - Handlebar Clamp, Monkey 125, MSX125 Grom, Silver
- 2 x TYTO-0004A - Carbon/Carbon Workshop Tray, Small (300x200x1.2mm)
- 1 x STAR-0215 - Tyga Step Kit Replacement Link Rod, 215mm
- 1 x APK1642700ZA - Rim Tape, 12 Inch, Orange, H2C
- 1 x TYTO-0010 - Front Fork Overhaul Kit, MSX125 Grom
- 1 x H073-A8Z1-0091GOLD - Clutch Adjuster, Gold, Bikers
- 2 x 70-525-61040 - Brake Lever, CNC, NSR250/NC29/NC30/NC35
- 1 x BPFS-0228 - Kit, Complete Body Set with Front Fender, GRP, NC30, RC30 Style, Street
- 1 x BPFS-0227 - Kit, Fairing Set, GRP, NC30, RC30 Style, Street
- 1 x BPFX-9008 - Air Duct, GRP, RC211V Style, Assy.
- 2 x LEVB-1011 - Brake Lever CNC Black, NSR250/MC22/NC30/NC35
- 1 x 86862-KZZ-J00 - Genuine HRC sticker (65mm)
- 1 x TELC-0005 - Temp Gauge, Race, Universal
- 1 x TMER-0171 - TYGA Tumbler
- 1 x BPCT-9049 - Seat Cowling, Carbon, Stock Shape, RS250R NXA
- 1 x APK26T17540ZA - Takegawa Tank pad
- 1 x EXPS-0055 - Set, Pipe, Full Race System, CBR300R/CBR300F, Round Aluminium Silencer, Stainless End Cap
- 1 x STAP-0001 - Tyga Step Kit Replacement Foot Peg (Long Type), Assy.
- 1 x TPER-0117 - Lever Set, CNC, Adjustable Flip Up Type, NC30 (RACE ONLY)
- 1 x TMER-0136 - TYGA Bike Dust Cover, Red, HRC (street)
- 1 x STAH-0025 - Tyga Step Kit Replacement Left Side Hanger, MC21/28 Riser Assy.
- 1 x 86102-K33-D00ZF - Decal, Honda, 55mm, Red
- 1 x TMER-0157 - TYGA Bike Dust Cover, Red, Honda Wing, Silver
- 1 x TMER-0109 - Sidestand Shoe, Blue
- 1 x BPFU-9023R - Upper Cowling Right, GRP, NC29, RC211V Style, Assy.
- 2 x TYTO-0030 - Parking Brake, Carbon, Universal
- 1 x BPCH-9023 - Rear Hugger, Carbon, NC29 CBR400RR Rear Hugger, RC211V style
- 1 x TMER-0124 - TYGA Bike Dust Cover, Black, HRC (race)
- 1 x TYSR-0302-32TG - Sprocket, Rear 32T, #420, Stock, Aluminium, MSX125 Grom/Monkey125 (Gold)
- 2 x STAT-0001 - Tyga Step Kit Replacement Toe Piece, Silver, Assy.
- 1 x BPFL-9001B - Lower Cowling, GRP, NSR250, MC28, Stock Shape, Assy
- 1 x CK-Honda-MC16,18,21 - Carb Service Kit, 14 pieces, Honda NSR250 MC16, MC18, MC21
- 1 x EXGL-0004 - Cartridge, Long Strand Glass Wool, Four Stroke, 2 inch
- 1 x 23801-K26-900 - Sprocket, Fr. 15T, MSX125 Grom
- 1 x TMER-0114 - Sidestand Shoe, Pink
- 1 x BPFS-0020 - Kit, Fairing set, Race, NC29 RC211V
- 1 x H052-A8Z1-0039SILVER - Clutch/Brake Mount Clamp), Silver, Bikers
- 1 x STAL-0003 - Tyga Step Kit Replacement Rear Brake Lever
- 1 x APK1642700ZF - Rim Tape, 12 Inch, Yellow, H2C
- 1 x LEVB-7001 - Brake Lever CNC, TYGA, Adjustable, Flip-Up Type MSX125 Grom, Monkey125, CBR125/150/25
- 1 x BPFS-0129 - Kit, Seat Set, GRP, Street, MC21 GP-T
- 1 x H052-A8Z1-0039RED - Clutch/Brake Mount Clamp), Red, Bikers
- 1 x BPFT-9049 - Seat Cowling, GRP, Stock Shape, RS250R NXA
- 1 x TMER-0048 - TYGA Bike Dust Cover, Blue/Black
- 1 x H136-A8Z1-0193SILVER - Top Triple Clamp Nut (M24x1), Silver, Bikers
- 1 x BPFU-9149 - Upper Cowling, Type 2, GRP, RS250R NXA
- 1 x H252-HDZ1-002RED - Brake Lever CNC, Red, Flip Up Type.
- 1 x TMER-0051 - TYGA Bike Dust Cover, Red/Black
- 1 x EXGL-0001 - Cartridge, Long Strand Glass Wool, Two Stroke
- 1 x APK20A53102TB - Handlebar End Weights, Grey, Pair
- 1 x H143-A8Z1-0099SILVER - Brake Lever CNC, Silver, Flip Up Type.
- 2 x LEVB-6011 - Brake Lever CNC Titanium, NSR250/MC22/NC30/NC35
- 2 x STAC-0009 - Rear Brake Light Switch Kit
- 1 x BPAC-1001 - TYGA Brake Reservoir Kit
- 1 x BPFS-0234 - Kit, Complete Bodywork Set, GRP, Type 2 Upper, with Front Fender, RS250R NXA
- 1 x 86102-KZZ-900ZC - Decal, Honda, 70mm, Red, (no background)
- 1 x APK26T11370TA - Engine Aluminium Cover, R, MSX125 Grom
- 1 x TMER-0137 - TYGA Bike Dust Cover, Red, HRC (race)
- 1 x EXGS-0001 - Silencer Gasket (3 Hole, 2T)
- 1 x APK1642700ZC - Rim Tape, 12 Inch, Blue, H2C
- 2 x STAP-0003 - Tyga Step Kit Replacement Foot Peg (Short Type), Assy.
- 2 x VHM-KRR150 - VHM Cylinder Head KRR150
- 1 x BPFS-0019 - Kit, Fairing Set, Street NC29 RC211V
- 2 x LEVB-0011 - Brake Lever CNC Silver, NSR250/MC22/NC30/NC35
- 1 x TYLY-0101 - Front Brake Reservoir Cover, RED, TYGA, MSX125 Grom
- 1 x H134-A8Z1-0195BLACK - Front Brake Reservoir Cover, BLACK, Bikers
- 1 x BPFL-9049 - Lower Cowling, GRP, Stock Shape, RS250R NXA
- 1 x APK2617520ZA - Tank Filler Cap Cover, Carbon Look
- 1 x BPFF-9049 - Front Fender, GRP, Stock Shape, RS250R NXA
- 1 x BPSY-0046 - Vibe Rubber
- 1 x BPCC-0026 - Carbon Cover, Temp Gauge, Surround 55.5mm
- 1 x TMER-0155 - TYGA Bike Dust Cover, Red, Honda Wing, White
- 1 x H073-A8Z1-0091RED - Clutch Adjuster, Red, Bikers
- 1 x BPFF-0005 - Front Fender, GRP, NC23,NC29, NC30, Stock Shape
- 1 x LEVC-9032 - Clutch Lever CNC Silver, NC29/ NC30/ NC35
- 1 x H253-HDZ1-002BLACK - Clutch Lever CNC, Black, Flip Up Type.
- 1 x APK2653310TA - Handlebar Clamp, CNC, Grey
- 1 x TYTO-0017 - Spring Puller
- 1 x BPCC-0025 - Carbon Cover, Rev Counter, Surround 91.5mm
- 1 x TMER-3001-L - Tyga T shirt, Black, size: L
- 1 x 90504-HA0-000 - Washer, Plastic, 9x20
- 1 x BPCC-0036 - Cover, Steering Under (Carbon) Honda RS250 NXA
- 1 x BPFL-0121 - Lower Cowling, GRP, NC30, RC30 Style, Street
- 1 x TYLY-1098 - Bracket, Front Brake, 84 mm Brembo Conversion, Black, MSX125 Grom
- 1 x BPFL-9001B-Painted - Lower Cowling (GRP), NSR250 MC28, Stock Shape, Painted Rothmans
- 1 x STAA-0002A - Racing Step Kit, MC21
- 1 x VHM-SK33062 - VHM Seal Kit, KRR150
- 1 x BPSY-0122 - Steering Stopper, MSX125 Grom
- 1 x 87130-KVB-900ZB - Decal, Honda 110mm, T2, Black, (no background)
- 1 x H073-A8Z1-0091SILVER - Clutch Adjuster, Silver, Bikers
- 1 x TYLY-0252 - Stay, Silencer, Aluminium, Universal
- 1 x BPCF-0005 - Front Fender, Carbon, NC23,NC29, NC30, Stock Shape
- 1 x OSYEP-D94-KF - Key Ring, HRC, Black.
- 1 x TYLY-1169 - Ignition Switch Holder, CNC Black, CBR250R/CBR300R
- 1 x BPFU-9023F - Upper Cowling RC211V style (Tyga Eyes III front), Assy.
- 2 x TYTO-0004B - Kevlar/Kevlar Workshop Tray, Small (300x200x1.2mm)
- 1 x STAL-0002 - Tyga Step Kit Replacement Gear Shift Lever
- 1 x H134-A8Z1-0195SILVER - Front Brake Reservoir Cover, SILVER, Bikers
- 1 x BPCF-9049 - Front Fender, Carbon, Stock Shape, RS250R NXA
- 1 x VHM-NSR250MC18 - VHM Cylinder Head Set NSR250 MC18
- 1 x APK2664390TA - Rider Foot Pegs, CNC, Grey, Pair, MSX125 Grom
- 1 x TYLY-0098 - Bracket, Front Brake, 84 mm Brembo Conversion, Silver, MSX125 Grom
- 1 x BPFG-0004Rothmans - Fuel Tank, GRP, NSR250, MC21, Painted Rothmans
- 1 x TELC-0001 - Turn Signal Relay, Two Pin
- 2 x BPCC-9003 - Heel Guard, Carbon, Tyga Step Kit Replacement, left
- 1 x TYLY-0263 - Front Fork Preload Adjusters, Pair, Kawasaki KRR150ZX
- 1 x 86861-KZZ-J00 - Genuine HRC sticker (120mm)
- 1 x H144-A8Z2-0082GOLD - Engine Inspection Covers, Gold, Bikers
- 1 x TMER-0047 - TYGA Bike Dust Cover, Blue
- 1 x JTA-C7-420-F-15T - Sprocket, Fr. 15T, MSX125 Grom
- 1 x TMER-0112 - Sidestand Shoe, Light Blue
- 1 x STIC-0029 - Sticker Set, Nicky, MSX125 Grom
- 1 x TYTO-0004C - Kevlar/Carbon Workshop Tray, Small (300x200x1.2mm)
- 1 x TWDS-0008 - Tyre Warmers, Minibike, Blue
- 1 x BPFS-0235 - Kit, Complete Bodywork Set, Carbon, Type 1 Upper, with Front Fender, RS250R NXA
- 1 x APK1642700ZD - Rim Tape, 12 Inch, Pink, H2C
- 1 x H116-A8Z1-0186SILVER - Clutch Lever CNC, Silver, Flip Up Type.
- 1 x 90133-KPP-T00 - Bolt, Bodywork Mounting, collared, M6, CBR
- 1 x TMER-0110 - Sidestand Shoe, Green
- 1 x 82049-N99-000 - Genuine HRC Sticker Set
- 1 x FAPS-0001 - Screen Fastener Set, Assy.
- 1 x APK2615651TA - Engine Filler Cap, CNC, Grey
- 1 x TYLY-1093 - Bracket, Rear Brake, 84 mm Brembo Conversion, Black, MSX125 Grom
- 1 x TYLY-0093 - Bracket, Rear Brake, 84 mm Brembo Conversion, Silver, MSX125 Grom
- 1 x JTA-H-NO-420-F-16T - Sprocket, Fr. 16T, MSX125 Grom
- 1 x 0900-341-00000 - Air filter foam sheet 250mm. x 300mm. x 12mm.
- 1 x 62337SVS/RV - Headlight Bulb, Halogen
- 1 x EXSL-0065 - Silencer, Shorty, Carbon, Two Stroke, Assy.
- 1 x TMER-0111 - Sidestand Shoe, Yellow
- 1 x APK26WASHERTA - Bush Set, Grey, MSX125 Grom
- 1 x 23801-KPH-900 - Sprocket, Fr. 13T, MSX125 Grom
$27,739.12US