HONDA RVF400 NC35 Exhausts
The TYGA Full Race System has been designed with maximum power mind. This system is a necessity if you need to squeeze every drop of horse power from the machine.
Manufactured from TIG welded stainless steel sections throughout, with all joints secured by springs, for that 'factory' look and feel. The system fits both the NC30 and NC35. Most systems are not designed to be used with a side stand on the NC30, but the TYGA system can be used with a sidestand on both the NC30 and NC35.
For unsurpassed looks, sound and performance, this system can be used with any of our 400 system exhaust silencers (pictured below) or any other compatible spring mounted 2" bore silencer.
TYGA provide the following compatible silencers which can either be ordered separately or together as a set.
If you need further reason to purchase this product, this exhaust is considerably lighter than the stock system. Weighing only half the weight of the stock system makes for a weight saving of 4.2 kg. (see table below)
TYGA | Honda | Difference | |
Front down pipes | 1000 | 1500 | 500 |
Rear Pipes | 2172 | 3500 | 1328 |
Rear Manifold | 0 | 858 | 858 |
Heat shield | 0 | 298 | 298 |
Pipes Total | 3172 | 6256 | 2984 |
Silencer | 1497 | 2704 | 1207 |
Total | 4669 | 8860 | 4191 |
Jetting Advice NC35:
With the TYGA exhaust, but with standard air box, you would be looking at main jets around Fr.112/Rr.115.
If you feel some lack of torque in the midrange, but with a strong top end then try to lift the needles with a 0.5mm washer.
Keep the slow jets as standard or the low speed running will be a problem.
This system may not comply to specific country noise emission regulations and is not homologated for street use.
Set, Pipe, Full Race System, NC30/35 (No Silencer) The TYGA Full Race System has been designed with maximum power mind.…
Set, Pipe, Full Race System, NC30/35, Maggot Silencer The TYGA Full Race System has been designed with maximum power mind.…
Set, Pipe, Full Race System, NC30/35, Oval, Carbon/Carbon End Cap Silencer The TYGA Full Race System has been designed with…
Set, Pipe, Full Race System, NC30/35, Oval Stainless Silencer The TYGA Full Race System has been designed with maximum power…
Set, Pipe, Full Race System, NC30/35, Round Aluminium Silencer The TYGA Full Race System has been designed with maximum power…
Set, Pipe, Full Race System, NC30/35, Round, Carbon Silencer The TYGA Full Race System has been designed with maximum power…
Set, Pipe, Full Race System, NC30/35, Round, Carbon/Carbon End Cap Silencer The TYGA Full Race System has been designed with…
Set, Pipe, Twin Stack System, NC30/35 (Hi Level), Carbon Silencers This exhaust system includes everything you…
Set, Pipe, Twin Stack System, NC30/35 (Hi Level), Stainless Silencers This exhaust system includes everything you…
Set, Pipe, Twin Stack System, NC30/35 (Street), Carbon Silencers This exhaust system includes everything you need to replace…
Set, Pipe, Twin Stack System, NC30/35 (Street) Stainless Silencers This exhaust system includes everything you need to replace the…
Silencer, Carbon, Round, Carbon End Cap, Four Stroke, 2" Assy. This silencer has a carbon endcap and a carbon tube to…
Silencer, Carbon, Round, Four Stroke, 2" Assy. This silencer has polished stainless steel endcaps and a carbon fiber tube to…
Silencer, Carbon, Round, Slip-On, RVF400 NC35, Assy. This easy to fit bolt on silencer replaces the stock heavy aluminium one on…
Silencer, Carbon/Carbon End Cap, Oval, Slip-On, RVF400 NC35, Assy. This easy to fit bolt on silencer replaces the stock heavy aluminium…
Silencer, Carbon/Carbon End Cap, Oval, Spring Mount 2", Assy. This silencer has a carbon endcap and a carbon tube to produce…
Silencer, Carbon/Carbon End Cap, Round, Slip-On, RVF400 NC35, Assy. This easy to fit bolt on silencer replaces the stock heavy aluminium…
Silencer, Stainless, Oval, Four Stroke, Stainless, Assy. Oval four stroke silencer. A tasty addition for your NC30/35 and VFR750F…
Silencer, Carbon, Round/Carbon End Cap Slip On, RVF400 NC35, No FittingsSame as EXSL-0122 but without any fittings. …
Silencer, Stainless Moto Maggot, 50.8 mm., Assy. The TYGA Moto Maggot stainless silencer, with 50.8 mm inside diameter, is definitely not…
Silencer, Stainless, Round, Twin Stack, No FittingsReplacement Silencer for TYGA Twin Stack System EXPS-0003 ( 2 silencers are…
Silencer, Carbon, Round, Twin Stack, No FittingsReplacement Silencer for TYGA Twin Stack System EXPS-0003 ( 2 silencers are…
Section, Collector, Final, Stainless, NC30/35Final Collector and combined tailpipe. Used on:EXPS-0002 Set, Pipe, Full Race System NC30-35 (No Silencer)EXPS-0011 Set, Pipe, Full…
Section, Collector, Intermediate, Front, Stainless, NC30/35 Intermediate (primary) collector for front headers. Used on: EXPS-0002 Set, Pipe, Full Race System NC30-35 (No Silencer) EXPS-0011 Set,…
Section, Collector, Intermediate, Rear, Stainless, NC30/35Intermediate (primary) collector for rear headers. Used on:EXPS-0002 Set, Pipe, Full Race System NC30-35 (No Silencer)EXPS-0011 Set,…
Section, Header, Front Left, Stainless, NC30/35Header, Front Left. Used on:EXPS-0002 Set, Pipe, Full Race System NC30-35 (No Silencer)EXPS-0011 Set, Pipe, Full Race…
Section, Header, Front Right, Stainless, NC30/35Header, Front Right. Used on:EXPS-0002 Set, Pipe, Full Race System NC30-35 (No Silencer)EXPS-0011 Set, Pipe, Full Race…
Section, Header, Rear Left, Stainless, NC30/35Header, Rear Left. Used on:EXPS-0002 Set, Pipe, Full Race System NC30-35 (No Silencer)EXPS-0011 Set, Pipe, Full Race…
Section, Header, Rear Right, Stainless, NC30/35Header, Rear Right. Used on:EXPS-0002 Set, Pipe, Full Race System NC30-35 (No Silencer)EXPS-0011 Set, Pipe, Full Race…
Section, Final, Front, Twin Stack, Hi Level, Stainless, NC30/35Final tailpipe section (front bank) for:EXPS-0157 Set, Pipe, Twin Stack…
Section, Final, Rear, Twin Stack, Hi Level, Stainless, NC30/35Final tailpipe section (rear bank) for:EXPS-0157 Set, Pipe, Twin…
Section, Final, Front, Twin Stack, Street, Stainless, NC30/35Final tailpipe section (front bank) for:EXPS-0003 Set, Pipe, Twin Stack System, Street, Carbon…
Section, Final, Rear, Twin Stack, Street, Stainless, NC30/35Final tailpipe section (rear bank) for:EXPS-0003 Set, Pipe, Twin Stack System, Street, Carbon…
Stay, Exhaust, Twin Stack, Hi Level, NC30/35, TYGA This product is to be…
Stay, Exhaust, Twin Stack, Street, NC30/35, TYGAThis product is to be used exclusively with our TYGA Twin Stack Exhaust systems…
Clamp, Manifold, NC30/35 Manifold Clamp. Fitted to rear cylinder port. For use with: EXPS-0002 Set, Pipe, Full Race System NC30-35 (No Silencer) EXPS-0011 Set, Pipe,…
Clamp, Silencer, Single, 4", Assy.Stainless steel clamp. 4" internal diameter with rubber protection for a firm, but friendly grip on…
Clamp, Silencer, Twin Stack, Hi Level, Carbon, Assy. This four stroke silencer clamp is…
Clamp, Silencer, Twin Stack, Hi Level, Stainless, Assy. This four stroke silencer clamp is specifically designed TYGA Twin Stack…
Clamp, Silencer, Twin Stack, Street, Aluminium/Stainless, Assy.This four stroke silencer clamp is specifically designed TYGA Twin Stack NC30/35 Exhaust system…
Clamp, Silencer, Twin Stack, Street, Carbon, Assy.This four stroke silencer clamp is specifically designed TYGA Twin Stack NC30/35 Exhaust system…
Collar, Manifold, NC30/35Manifold Collar. Fitted to rear cylinder port. For use with:EXPS-0002 Set, Pipe, Full Race System NC30-35 (No Silencer)EXPS-0011 Set, Pipe,…
Exhaust Stay, Carbon, NC30/35Direct replacement for the stock NC30 exhaust stay. This item is ideal for single seat conversions…
Cartridge, Long Strand Glass Wool, Four Stroke, 2"This is a replacement glass wool cartridge ideal for repacking Tyga or other…
Decibel Killer, Silencer, Stainless, 49mmThis decibel killer is designed to reduce the noise from TYGA exhausts with 2 inch…
Spring, Exhaust, Swivel Head Used on many types of TYGA 4 stroke SilencersAlso used for the two…
Gasket, ExhaustCompatible with:With NC30/35 exhaust systems including TYGA systems: EXPS-0002 Set, Pipe, Full Race System NC30-35 (No Silencer) EXPS-0011 Set, Pipe,…
Spring PullerHandy, tough, spring puller ideal for removal of exhaust mounting springs in those difficult to get places.…