Due to popular demand, we have developed a full range of bodywork for the CBR400RR. This takes styling cues from the RC211V and totally modernises the look of the popular sportsbike. The parts can be bought as kits, (full fairing kit and seat cowling kit) and we also offer a hugger, and other small carbon components as well as front fenders to complete the transformation bringing the bike right up to date.
The bodywork is made from high quality GRP using cross weave mat with an excellent finish on both outside and inside. Where stated, some products use carbon fiber. We use epoxy resins for superior strength, while at the same time allowing for light and flexible panels. The bodywork is supplied predrilled for easy fitment and uses either the original CBR400RR parts or fasteners supplied in the kit for easy fitment.
Note: While every effort has been made to design and manufacture our products to make fitment as easy as possible, we advise that panels are fitted to the motorcycle prior to painting. These parts are handmade, and as such, there may be slight differences in dimensions. Also, if your motorcycle has been in an accident, make sure that all stays and mounting brackets are in the correct alignment and have not been damaged in an accident. Finally, we advise when fitting fairings to loosen off all mounting stays and brackets to allow for the best fitment position of the fairings.
×
Carbon Cover, Temp Gauge, Surround 55.5mm has been added to your Cart
Kit, Fairing set, Race, NC29 RC211V
This set of bodywork comprises of the parts shown below which are also available…
Model BPFS-0020 Quantity 1 Kit, Fairing Set, Street NC29 RC211V
This set of bodywork comprises of the parts below which are also available…
Model BPFS-0019 Quantity 1 Kit, Seat Set, Street, NC29 RC211V
This set of bodywork comprises the parts shown below which are also available…
Model BPFS-0021 Quantity 1 Carbon Covers, Set, Instrument Surrounds
Theses covers fit snuggly over the original plastic Honda gauge covers and adds a sporty…
Model BPCC-0028 Quantity 100+ Carbon Cover, Rev Counter, Surround 91.5mmThis cover fits snuggly over the original plastic Honda gauge cover and adds…
Model BPCC-0025 Quantity 6 Carbon Cover, Speedo Surround 92mmThis cover fits snuggly over the original plastic Honda gauge cover and adds a…
Model BPCC-0022 Quantity 12 Carbon Cover, Temp Gauge, Surround 55.5mmThis cover fits snuggly over the original plastic Honda gauge cover and adds…
Model BPCC-0026 Quantity 6 Front Fender, GRP, NC23,NC29, NC30, Stock ShapeTop quality GRP reproduction of the stock OEM Honda front fender (weight of…
Model BPFF-0005 Quantity 6 Front Fender, GRP, NC23,NC29, NC30, Stock Shape, Painted Ross White, (NH-196)
Top quality GRP reproduction of the stock OEM…
Model BPFF-0005rosswhite Quantity 4 Front Fender, Carbon, NC23,NC29, NC30, Stock Shape
Real Carbon fibre reproduction of the stock OEM Honda front fender. Finished in high…
Model BPCF-0005 Quantity 3 Front Fender, Carbon, NC29-30 2006 RC211V Style Attaches to the original mounting points and can be used with all…
Model BPCF-9002 Quantity 2 Front Fender, GRP, NC29/30, 2006 RC211V styleAttaches to the original mounting points and can be used with all Tyga and…
Model BPFF-9002 Quantity 2 Front Fender, Carbon, Sports Universal
This carbon front fender is suitable for many models and is fixed to the front forks via…
Model BPCF-9010 Quantity 2 Air Duct, Carbon, RC211V Style, Assy.This airduct is a direct replacement for the fiberglass version which is supplied with our…
Model BPCX-9008 Quantity 1 Rear Fender Special (with Carbon), NC29, Assy.Rear Fender/luggage compartment specially designed to be used with our RC211V style seat cowling…
Model BPFX-9023 Quantity 1 Rear Hugger, Carbon, NC29 CBR400RR Rear Hugger, RC211V styleA very stylish replacement hugger for the NC29, following the RC211V trend.This…
Model BPCH-9023 Quantity 2 Air Duct, GRP, RC211V Style, Assy.Please note this product is included when you order any of our RC211V style kits.…
Model BPFX-9008 Quantity 2 Lower Cowling, GRP, RC211V Style, NC29, Assy. …
Model BPFL-9023 Quantity 1 Seat Cowling, Street, GRP, NC29 CBR400RR RC211V Style, Assy.This is part for body set BPFS-0021 and only includes the replacement seat…
Model BPFT-9023 Quantity 1 Upper Cowling Front, Race, GRP, RC211V Style, Assy.This is a replacement part for bodywork set BPFS-0012, BPFS-0014 and BPFS-0020…
Model BPFU-9120F Quantity 1 Upper Cowling Left, GRP, NC29 RC211V Style, Assy.This is a replacement part for bodywork set BPFS-0019…
Model BPFU-9023L Quantity 1 Upper Cowling RC211V style (Tyga Eyes III front), Assy.This products is a replacement part for bodywork sets BPFS-0019, BPFS-0032 and…
Model BPFU-9023F Quantity 1 Upper Cowling Right, GRP, NC29, RC211V Style, Assy.This is a replacement part for bodywork set BPFS-0019…
Model BPFU-9023R Quantity 1 Replacement meter stay extension nylon shaft. Suitable for the following models: BPFS-0012 BPFS-0019 BPFS-0032 BPFS-0033…
Model BPSY-0036 Quantity 13 Vibe Rubber. Suitable for the following models: BPFS-0012 BPFS-0013 BPFS-0014 BPFS-0019 BPFS-0020 BPFS-0032 BPFS-0033 BPFS-0090 BPFS-0092 BPFS-0115 BPFS-0119See table below…
Model BPSY-0046 Quantity 57 Headlight Bulb, Halogen12V 35/35W Halogen Reverse type bulb. This is a top quality halogen replacement bulb for use with…
Model 62337SVS/RV Quantity 100+ Headlight/Turn Signal Assembly, Tyga Eyes III, Assy.This sleek integrated uses Osram 35/35W bulbs and modern reflector and refractor technology…
Model BPLT-0012 Quantity 100+ Bolt, Bodywork Mounting, non-collared, M6, CBRBodywork mounting bolt, CBR125R, CBR150R, CBR250R, CBR300R. M6 X10 mm. No collar. OEM Honda part…
Model 90132-KPP-T00 Quantity 75 Bolt, Bodywork Mounting, collared, M6, CBRBodywork mounting bolt with collar, CBR125R, CBR150R, CBR250R. CBR300R, M6 X14 mm. Has 8mm.…
Model 90133-KPP-T00 Quantity 100+ Screen Fastener Set, Assy.This set of TYGA screen fasteners consists of 10 X black zinc coated M4 bolts, and clear…
Model FAPS-0001 Quantity 100+
Displaying 1 to 30 (of 30 products)