Section, Header, Right, Stainless, Yamaha YZF-R25 and YZF-R3Used with EXPS-0072, EXPS-0073, EXPS-0074 and EXPS-0075.…
Section, Final, Rear, Twin Stack, Street, Stainless, NC30/35Final tailpipe section (rear bank) for:EXPS-0003 Set, Pipe, Twin Stack System, Street, Carbon…
Section, Header, Stainless, Kawasaki Z125Lambda Sensor Bung: M12…
Section, Header, Stainless, MSX125 Grom…
Section, Intermediate, Stainless, High Level, GROM …
Section, Intermediate, Stainless, MSX125 Grom…
Section, Intermediate, Stainless, Twin Exit, High Level, GROM …
Section, Intermediate, Stainless, Yamaha YZF-R25 and YZF-R3Used with EXPS-0072, EXPS-0073, EXPS-0074 and EXPS-0075.…
Section, Collector, Stainless, Twin Exit, High Level, GROM …
Section, Final, Stainless, Twin Exit, Left, High Level, GROM…
Section, Final, Stainless, Twin Exit, Right, High Level, GROM…
Section, Mesh Slip-On, Stainless, Yamaha YZF-R25 and YZF-R3For use with EXPS-0069 only.The Slip joint is 2" internal,…
Section, Pipe, Stainless, CBR125CBR125 Pipe. Silencer not included.…
Section, Pipe, Stainless, CBR150CBR150 Pipe. Silencer not included.…
Section, Pipe, Underbelly, Full Race System, MSX125 GromSuitable for our exhaust systems EXPS-0064 and EXPS-0068 …
Mount Stay, VFR750F, RC36-2 Securely mounts the exhaust to the frame. Rubber mounted to eliminate vibration. Used in the…
Spring, Exhaust, Two Stroke. Replacement expansion chamber securing spring. Fits all TYGA two stroke systems.This is a replacement…
Spring, Exhaust, Swivel Head, Short, Four StrokeFor Use with Tyga Kawasaki Ninja 250 system…
Stay, Exhaust, Twin Stack, Hi Level, NC30/35, TYGA This product is to be…
Stay, Exhaust, Twin Stack, Street, NC30/35, TYGAThis product is to be used exclusively with our TYGA Twin Stack Exhaust systems…
Stay, Maggot Silencer, MSX125SF, High Level ExhaustThis product allows for the use of a TYGA Performance high level full race…
Stay, Oval Silencer, MSX125SF, Underbelly ExhaustStay, Silencer, Underbelly, MSX125 GromConsisting of the following parts: 1x Stay …
Stay, Silencer, Yamaha TZR250 (3MA)Replacement part for Yamaha TZR250 (3MA) exhaust system EXCS-0051…
Stay, Pipe Mount, Kawasaki Z125.This stay mounts the Z125 final section to the bike, neatly and securely and is rubber…
Stay, Silencer, High Level Exhaust, MSX125This product allows for the use of a TYGA Performance high level full race system…
Stay, Silencer, Kawasaki Z125.This stay secures the silencer to the bike in a neat and tidy solution that is hardly…
Stay, Silencer, Aluminium, Universal25.4mm x 4.7mm Aluminium flat bar, pre-drilled at one end for fabricating your own custom…
Stay, Silencer, Yamaha YZF-R25 and YZF-R3Used on EXPS-0072, EXPS-0073 and EXPS-0074.Two different length mounting bolts are provided to allow the…
Clamp, 4" Round Stainless Silencer, Single, M10Stainless steel clamp. Round with rubber protection for a firm, but friendly grip…
Clamp, Emission Canister, Yamaha YZF-R25 and YZF-R3Used with EXPS-0072 EXPS-0073 and EXPS-0074Relocates the emission canister for exhaust header pipe clearance.…
Clamp, Manifold, NC30/35 Manifold Clamp. Fitted to rear cylinder port. For use with: EXPS-0002 Set, Pipe, Full Race System NC30-35 (No Silencer) EXPS-0011 Set, Pipe,…
Clamp, Oval, Carbon Silencer, Single, Ninja 250, Assy.Stainless steel clamp. Oval with rubber protection for a firm, but friendly grip…
Clamp, Oval Stainless Silencer, Single, Assy.Stainless steel clamp. Oval with rubber protection for a firm, but friendly grip on your…
Clamp, Oval, Carbon Silencer, Single, Assy.Stainless steel clamp. Oval with rubber protection for a firm, but friendly grip on your…
Clamp, Pipe Section, 43-47mm.Stainless steel clamp. 43-47mm. internal diameterCompatible with Spipe section EXPT-0013…
Clamp, Round Stainless Silencer, Single, M10Stainless steel clamp. Round with rubber protection for a firm, but friendly grip on your…
Clamp, Round Stainless Silencer, Single, M8Stainless steel clamp. Round with rubber protection for a firm, but friendly grip on your…
Clamp, Silencer, Ninja 250, Single, 4", Assy.Stainless steel clamp. 4" internal diameter with rubber protection for a firm, but friendly…
Clamp, Silencer, Single, 120mm., Assy.Stainless steel clamp. 120 mm., internal diameter with rubber protection for a firm, but friendly grip…
Clamp, Silencer, Single, 4", Assy.Stainless steel clamp. 4" internal diameter with rubber protection for a firm, but friendly grip on…
Clamp, Silencer, Single, 86mm., Assy.Stainless steel clamp. 86 mm. internal diameter with rubber protection for a firm, but friendly grip…
Clamp, Silencer, Single, Assy.Stainless steel clamp. With rubber protection for a firm, but friendly grip on your silencer. Includes mounting…
Clamp, Silencer, Single, Oval, Assy.Stainless steel clamp. large oval, 122mm x 90mm internal dimensions with rubber protection for a firm,…
Clamp, Silencer, Single, Oval, Large, Assy.Stainless steel clamp. large oval, (116 mm. C 91 mm.) internal diameter with rubber protection…
Clamp, Silencer, Single, Oval, PCX150, Assy.Stainless steel clamp. large oval, 122mm x 90mm internal dimensions with rubber protection for a…
Clamp, Silencer, Twin Stack, Hi Level, Carbon, Assy. This four stroke silencer clamp is…
Clamp, Silencer, Twin Stack, Hi Level, Stainless, Assy. This four stroke silencer clamp is specifically designed TYGA Twin Stack…
Clamp, Silencer, Twin Stack, Street, Aluminium/Stainless, Assy.This four stroke silencer clamp is specifically designed TYGA Twin Stack NC30/35 Exhaust system…
Clamp, Silencer, Twin Stack, Street, Carbon, Assy.This four stroke silencer clamp is specifically designed TYGA Twin Stack NC30/35 Exhaust system…
Decibel Killer, Silencer, Stainless, Moto Maggot, 49mmThis decibel killer is designed to reduce the noise from the TYGA…
Collar, Manifold, NC30/35Manifold Collar. Fitted to rear cylinder port. For use with:EXPS-0002 Set, Pipe, Full Race System NC30-35 (No Silencer)EXPS-0011 Set, Pipe,…
Decibel Killer, Silencer, Stainless, 35mm.Note, this is suitable for stainless silencer type EXSL-0057L EXSL-0057R EXSL-0049 EXSL-0060 EXSL-1142 EXSL-0058 EXSL-0059…
Harness, Lambda, Ninja 250/300 2013-This is an extension to allow the lambda sensor to be plugged into the stock wiring…
Hook, SpringThis product is a stainless steel spring hook to be welded to existing pipework when used with our spring…
Manifold, Left, Ninja 250This is a replacement part. When ordering an exhaust system, this item is included in the price and…
Manifold, Left, Ninja 250/300This is a replacement part. When ordering an exhaust system, this item is included in the price and…
Manifold, Right, Ninja 250This is a replacement part. When ordering an exhaust system, this item is included in the price and…
Manifold, Right, Ninja 250/300This is a replacement part. When ordering an exhaust system, this item is included in the price and…
Replacement Silencer, Slip On, Carbon, Oval/Carbon End Cap, Yamaha R25/R3Hand assembled with carbon sleeve. Precision made CNC machined…
Replacement Silencer, Slip-On, Stainless, Oval/Carbon End Cap, Yamaha R25/R3Hand assembled with brushed stainless steel sleeve. Precision made CNC…
Clamp, Silencer, GP (61mm., 2x Bolt) This GP silencer clamp is specifically designed TYGA GP style expansion chambers for the…
Clamp, Silencer, GP, 70mm (2x Bolt)Fabricated in 304 Stainless Steel with Molded rubber for secure, yet safe clamping.…
Clamp, Silencer, GP, 70mm (1x Bolt)Designed to securely clamp 70mm. O.D. silencers. Fabricated in 304 Stainless Steel with…
Cartridge, Long Strand Glass Wool, Four Stroke, 2"This is a replacement glass wool cartridge ideal for repacking Tyga or other…
Section, Header, Stainless, WSS300 Race System, KTM RC390/390 Duke Replacement Header section for Full Systems EXPS-0111, EXPS-0112, EXPS-0113, EXPS-0141,…
Section, Final, Stainless, WSS300 Race System, KTM RC390 20147-2021Replacement part to be used with EXPS-0111 and EXPS-0112…
Section, Final, Stainless, WSS300 Race System, KTM RC390 2022-2023Replacement part to be used with EXPS-0160…
Silencer, Stainless, Round, WSS300, Assy, KTM RC390 2022-2023Replacement Silencer for WSS300 Race System EXPS-0160The 'slip-on' mount is…
Replacement Silencer, Stainless/Carbon End CapUsed with EXPS-0072 and EXPS-0144…
O Ring, Aprilia/RGV250 Exhaust Manifold (single) Replacement O rings for the TYGA exhaust manifold used with the TYGA expansion chamber.Remember…
O Ring, RGV250 VJ23 Exhaust Manifold (single) Replacement O rings for the TYGA exhaust manifold used with the TYGA expansion…
O-Ring Viton, ID 45mm, THK 2mmReplacement O rings for TYGA NSR250 expansion chamber.Remember to order four of…
Silencer Gasket (3 Hole, 2T)Replacement Gasket for the TYGA " Classic" 2 stroke silencersThis is a replacement…
Exhaust Silencer Hanger Lock Joint, Aprilia RS250Replacement part …
Exhaust Silencer Hanger Stay Arm, Aprilia RS250Replacement part …
Mount Stay, Exhaust, RGV250 VJ21, Assy Mount kit for VJ21 chambers. This mount kit allows for fitment…
Section, Header, Front Left, Stainless, VFR750F, RC36-2 Header, Front Left, used on: EXPS-0119 (No Silencer) EXPS-0122 Oval Carbon/Carbon End…
Section, Header, Front Right, Stainless, VFR750F, RC36-1 & RC36-2 …
Section, Header, Rear Left, Stainless, VFR750F, RC36-2 Header, Rear Left, used on the following TYGA exhaust sets: EXPS-0119 …
Section, Collector, Intermediate, Lower, Stainless, VFR750F, RC36-1 & RC36-2 …
Section, Collector, Intermediate, Upper, Stainless, VFR750F, RC36-1 …
Section, Header, Front Left, Stainless, VFR750F, RC36-1…
Section, Header, Rear Left, Stainless, VFR750F, RC36-1…
Section, Secondary A, R.H Exit, VFR750F, RC36-1 …
Section, Secondary B, R.H Exit, VFR750F, RC36-1…
Section, Header, Rear Right, Stainless, VFR750F, RC36-1 & RC36-2…
Collar, Manifold, VFR750F, RC369-1 & RC36-2 Manifold Collar. Fitted to rear cylinder port. …
Clamp Manifold, VFR750F, RC36-1 & RC36-2 Manifold Clamp. Fitted to rear cylinder port. …
Section, Final, R.H Exit, Stainless, VFR750F RC36-1 & RC36-2…
Silencer, Stainless, Round, Four Stroke, 50.8mm. bore, Sleeve, 4 inch X 430mm (No fittings) Replacement silencer and…
Silencer, Aluminiumt, Round, Four Stroke, 50.8mm. bore, Sleeve, 4 inch X 430mm (No fittings) Replacement silencer and…