Set, Pipe, Full Race System, Serpent, KTM RC390, 2017-2019 Stainless Moto Maggot
This race system has been specifically developed for the KTM RC390 to maximise performance and looks. The dual underseat system eliminates any issues with ground clearance unlike some other systems on the market. In addition, in the event of an accident the exhaust is well protected. Other systems which have the exhaust exiting the right side of the swing arm will usually suffer terminal damage. This system increases performance, saves weight and enhances the looks of the bike. The system is supplied with decibel killers (EXDK-0002) but may not meet noise regulations in your area.
youtube videos of the same system with oval silencers, left without and right with the decibel killers installed
This exhaust can be installed on a bike fitted with the cup race bodywork or standard, with passenger pegs installed or removed. It can be installed with stock registration/turn signal holder.
For use with standard belly pan, we recommend the installation of the exhaust outlet cover BPFC-7431, and for use without passenger pegs, option carbon exhaust guards are available BPCC-0021L and BPCC-0021R.
Please also see EXPS-0091 for similar system with oval silencers
Feel free to request this product with no TYGA logo. we understand not everyone wants their bike to be covered with graphics and won't be offended. Simply put in the comment box with your order: 'Please supply with no TYGA logo'. Just let us know your requirements; we want to provide the best possible product for your application.
Performance and Dynograph
Please refer to dynograph
A) All Standard.
B) TYGA Serpent Pipe EXPS-0061, PC-V. Airbox/Engine all standard. Custom fuel/ignition map
C) TYGA Serpent Pipe EXPS-0061, PC-V. Airbox lid mod. No Filter. Custom fuel/ignition map
Very useful gains especially in the mid range for both B) and C), for much stronger acceleration.
The silencer was full bore.
NEW! for the 2017 model we added the EXPT-0003:
Header exhaust, designed for unimpeded flow. Unlike the stock KTM header for the RC390, which has creases and dents to fit between the frame and engine, the TYGA header has been carefully fabricated to retain the round cross sectional area throughout, to avoid turbulent gas flow. Complete with Lambda sensor bung in the original position.
Compatible with the following exhausts:
Compatible with 2014-2016 KTM stock exhaust and other systems using the stock KTM header for those years.
Compatible with 2014-2016 TYGA exhaust systems EXPS-0061 and EXPS-0062
Included with 2017 on TYGA exhaust systems EXPS-0091 and EXPS-0092
This product contains the following items:|
|8 x || (EXSG-0002) Spring, Exhaust, Swivel Head|| $2.53US|
|2 x || (EXDK-0002) Decibel Killer, Silencer, Stainless, 35 mm.|| $15.97US|
|1 x || (EXPT-0053) Section, Collector 1-2, KTM RC390 Serpent|| $52.68US|
|1 x || (EXPT-0054) Section, Left #1, KTM RC390 Serpent|| $40.38US|
|1 x || (EXPT-0055) Section, Right #1, KTM RC390 Serpent|| $40.38US|
|1 x || (EXPT-0057) Section, Right #2, KTM RC390 Serpent|| $116.82US|
|1 x || (EXPT-0056) Section, Left #2, KTM RC390 Serpent|| $116.82US|
|1 x || (BPSY-0167) Stay, Silencer, KTM RC390 Serpent|| $51.01US|
|1 x || (EXSL-8113L(p)) Silencer, Stainless Moto Maggot, Left, KTM RC390 Serpent, No fittings|| $211.59US|
|1 x || (EXSL-8113R(p)) Silencer, Stainless Moto Maggot, Right, KTM RC390 Serpent, No fittings|| $211.59US|
|1 x || (EXPT-0003) Section, Header, Stainless, KTM RC390|| $157.13US|
Cost of separate parts: $1,050.57US
|You save $134.68US|